Palladium 5 Gramm / Liter

White Bronze Electrolyte SW10011.1 Fast plating electrolyte for bright white bronze coatings as an alternative to nickel Short Description The White Bronze Electrolyte SW10011.1 is a brush or bath electroplating solution for depositing a bright white bronze alloy on conductive metal surfaces. When used, it produces an antimicrobial white bronze layer that can replace traditional nickel plating, replicating similar hardness and color while avoiding nickel allergy issues. Real Gold Applications This bronze plating electrolyte is used to: Apply bright white bronze coatings on a variety of metals Replace nickel plating where nickel avoidance is desired Provide corrosion-resistant and antimicrobial layers Act as a barrier layer between copper/brass and gold Create decorative or functional coatings in brush or bath plating Real Gold How It Works (Simple Explanation) White bronze plating is achieved by mixing this electrolyte with an alkaline copper plating solution (1:1) and applying direct current. The bronze alloy deposits as a uniform, bright metallic layer. Real Gold Benefits High deposition rates and efficient operation Nickel-free alternative with similar physical properties Antimicrobial and corrosion-resistant surface Functions as a barrier layer before gold plating Decorative and functional surface finish Compatible with brush and bath plating Real Gold Typical Parameters PropertyValue / RangeElectrolyte typeWhite bronze plating solutionMixing ratio1 part alkaline copper : 1 part White BronzeVoltage3.2–3.5 VTemperature18–25 °C (optimum ~22 °C)ElectrodeGraphite/platinumTypical alloy~42 % Cu / 58 % SnHardness450–500 HVDensity of deposit8.6–8.8 g/cm³Plating rate0.7–1.5 µm/minShelf life~4 weeks if stored correctlyStorage2–5 °C recommendedAir sensitiveYes — keep sealed Safety Information Follow all standard electroplating safety practices: Wear protective gloves, goggles, and clothing Avoid contact with skin and eyes Use in well-ventilated areas Keep out of reach of children Dispose of wastes per local regulations Conclusion The White Bronze Electrolyte SW10011.1 is a versatile plating solution that produces bright, antimicrobial white bronze coatings with mechanical and aesthetic properties close to nickel plating. It is especially useful where nickel use is restricted or undesirable, and as a barrier layer prior to gold plating in both decorative and functional applications.

White Bronze Electrolyte SW10011.1 Fast plating electrolyte for bright white bronze coatings as an alternative to nickel Short Description The White Bronze Electrolyte SW10011.1 is a brush or bath electroplating solution for depositing a bright white bronze alloy on conductive metal surfaces. When used, it produces an antimicrobial white bronze layer that can replace traditional nickel plating, replicating similar hardness and color while avoiding nickel allergy issues. Real Gold Applications This bronze plating electrolyte is used to: Apply bright white bronze coatings on a variety of metals Replace nickel plating where nickel avoidance is desired Provide corrosion-resistant and antimicrobial layers Act as a barrier layer between copper/brass and gold Create decorative or functional coatings in brush or bath plating Real Gold How It Works (Simple Explanation) White bronze plating is achieved by mixing this electrolyte with an alkaline copper plating solution (1:1) and applying direct current. The bronze alloy deposits as a uniform, bright metallic layer. Real Gold Benefits High deposition rates and efficient operation Nickel-free alternative with similar physical properties Antimicrobial and corrosion-resistant surface Functions as a barrier layer before gold plating Decorative and functional surface finish Compatible with brush and bath plating Real Gold Typical Parameters PropertyValue / RangeElectrolyte typeWhite bronze plating solutionMixing ratio1 part alkaline copper : 1 part White BronzeVoltage3.2–3.5 VTemperature18–25 °C (optimum ~22 °C)ElectrodeGraphite/platinumTypical alloy~42 % Cu / 58 % SnHardness450–500 HVDensity of deposit8.6–8.8 g/cm³Plating rate0.7–1.5 µm/minShelf life~4 weeks if stored correctlyStorage2–5 °C recommendedAir sensitiveYes — keep sealed Safety Information Follow all standard electroplating safety practices: Wear protective gloves, goggles, and clothing Avoid contact with skin and eyes Use in well-ventilated areas Keep out of reach of children Dispose of wastes per local regulations Conclusion The White Bronze Electrolyte SW10011.1 is a versatile plating solution that produces bright, antimicrobial white bronze coatings with mechanical and aesthetic properties close to nickel plating. It is especially useful where nickel use is restricted or undesirable, and as a barrier layer prior to gold plating in both decorative and functional applications.

Graphite Electrode Ø 6 mm (BMG‑010) Short Description The Graphite Electrode Ø 6 mm (BMG‑010) is a durable, chemically inert electrode rod made from high‑density fine‑grain graphite. Designed for use as an anode or electrode in electroplating processes, it is ideal for bath, pen, and pad plating applications where a clean, metal‑free current supply is essential.  Product Description This graphite electrode is manufactured from highly compressed fine‑grain graphite, which dissolves only slowly in electrolytes. Unlike metallic anodes, graphite does not shed contaminating metal particles, ensuring cleaner coatings and higher deposit quality.  The 6 mm diameter rod, with an approximate length of 95 mm, fits standard plating fixtures, holders, and pen plating tools, making it easy to integrate into various electroplating setups Typical Applications Electroplating processes (e.g., silver, gold, copper, black nickel, chrome, white bronze) Pen, bath, and pad plating Activation and pre‑treatment steps Counter‑electrode or anode use in a wide range of electrolytes Situations where metal contamination must be avoided Key Benefits Chemically inert: prevents unwanted metal ion contamination in the plating bath. Versatile: compatible with most electroplating chemistries and techniques.  Slow wear: dissolves gradually, extending service life. Affordable: cost‑effective solution for frequent use.  Easy to use: fits common plating holders and pen plating tools. Material & Dimensions Material: High‑density fine‑grain graphite Diameter: 6 mm Length: approx. 95 mm (other lengths may be available)  Practical Tips Ensure electrodes are clean and free of oils before use.  Replace electrodes periodically as they slowly dissolve during electroplating. Graphite’s mild warming effect can help stabilize bath temperature during plating. Conclusion The Graphite Electrode Ø 6 mm is an effective and reliable anode/electrode for a wide range of electroplating applications. Its inert behavior, broad compatibility, and metal‑free current delivery make it a solid choice for hobbyists, workshops, labs, and professional plating operations.

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Nickel Electrolyte BMG-091.1 High-Quality Nickel Electrolyte for Electroplating Metal Surfaces Short Description The Nickel Electrolyte BMG-091.1 is a ready-to-use galvanic solution for electroplating decorative nickel layers on metal parts. It is suitable for beginners, workshops, and professional applications. Nickel plating improves corrosion resistance, enhances surface finish, and prepares the surface for further coatings such as gold or chrome plating. real-gold.de What Is This Nickel Electrolyte Used For? This nickel electrolyte is designed for electroplating a smooth, bright nickel coating onto metal objects to: provide a protective layer against corrosion improve surface appearance and wear resistance act as an intermediate layer before gold, silver, or chrome plating real-gold.de Typical applications include: Automotive and machinery parts Decorative metal components Restoration and repair projects Hobby and craft electroplating How Does Nickel Plating Work? (Simple Explanation) Electroplating uses electric current to deposit metal from a liquid solution onto a workpiece. Clean and degrease the metal surface thoroughly. Attach the workpiece as the cathode (negative terminal). Immerse both the workpiece and a nickel anode in the nickel electrolyte. Apply direct current; nickel ions in the solution are reduced and form a solid nickel layer on the workpiece. real-gold.de Proper surface preparation and correct electrical settings are key to achieving a smooth, shiny nickel finish. Advantages of Nickel Electrolyte BMG-091.1 Easy to use for beginners and advanced users Produces uniform, bright nickel coatings Ideal as a protective layer or base for further plating processes Works with common plating methods such as tank plating, brush plating, and pen plating real-gold.de Technical Parameters PropertyValue / RangeNotesElectrolyte TypeNickel electrolyteFor decorative nickel platingWorking Temperature15–60 °CRoom temperature operation possibleVoltage (Tank Plating)~2–6.5 V~4 V recommendedVoltage (Pen / Brush Plating)~3–6 V~4.5 V recommendedCurrent Density0.5–4 A/dm²Up to ~7 A/dm² with bath movementpH Value~3.5–4.5Correctable with dilute acidDeposition Rate~1.3 µm/min at 3 A/dm²Typical plating performanceTypical SubstrateSteel, copper, brass, other metalsClean and prepare surfaceRecommended AnodesNickel or platinumBest results with appropriate anode selection Practical Application Notes Clean the workpiece meticulously before plating to ensure good adhesion. real-gold.de Nickel layers provide an excellent barrier layer for later gold, silver, or chrome plating. real-gold.de Slight movement of the electrolyte bath can help create a more uniform nickel layer. real-gold.de Nickel plating is widely used because nickel adheres well to many metals and provides a good base for further finishes. realgold-shop.de Safety Information Nickel electrolytes contain nickel compounds, which can cause allergic skin reactions and other health effects if mishandled: Wear protective gloves and eye protection Avoid skin and eye contact Work only in well-ventilated areas Do not inhale vapors or mists Keep out of reach of children Follow all instructions and the safety data sheet (SDS) real-gold.de Scope of Delivery Nickel Electrolyte BMG-091.1 Quantity according to selected size Important Notice This product is not a toy and requires basic electroplating knowledge. For best results, combine this electrolyte with proper pre-treatment and post-treatment products. Continuous monitoring of parameters such as voltage, current, and bath condition will improve plating quality