Black Rhodium 2 G/L.
€39.00
Available, delivery time: 1-2 days
Product information "Black Rhodium 2 G/L."
Black Rhodium - black rhodium plating by Betzmann Galvanik
The ready-to-use black rhodium electrolyte is suitable for both pin, pad and bath electroplating!
It deposits dark anthracite-gray, extremely decorative rhodium layers. The layers are very abrasion resistant, color consistent and uniform.
The Black Rhodium Electrolyte from Betzmann Galvanik is preferred for decorative coatings in the jewelry and eyewear industries. This black rhodium electrolyte is characterized by simple bath management and very user-friendly handling. It also operates at room temperature, which means that time- and energy-consuming heating can be omitted. Layers down to 0.5 µm can be deposited.
Operating data:
Rhodium content: 2.0 g/l Rh
pH value: <1
Density: 1.02-1.07 g/cm3
Working conditions:
Voltage: 2.7 -3 volts
Bath temperature: 20-27°C
Exposure time: 2 min. (1-5 min.)
Mixed oxide anodes/platinized titanium, graphite electrode
Anode/cathode surface: 1 : 1
Current density: 1.0-1.5 A/dm2
Fabric movement: required
Bath filtration: from 10 liters
deposition rate: 6-8mg/Amin
Precipitation data:
Hardness: 300-370 HV
Layer thickness: max. 0.5 µm
Density: approx. 10.5 g/cm3
Delivery form:
Ready for use
A descaling with 10% sulfuric acid of the surface to be coated is recommended!
For guidelines see download area!
Darker coatings can be obtained with our blackening additive
Hazard statements
H314 Causes severe skin burns and eye damage.
H290 May be corrosive to metals.
Precautionary statements
P234 Keep only in original container.
P260 Do not breathe dust/fumes/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P310 Immediately call a POISON CENTER/doctor/…/.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor/…/.
P390 Absorb spilled quantities to prevent material damage.
P405 Store locked up.
P406 Store in a corrosion-resistant container with a corrosion-resistant inner lining.
Similar Items
Graphite round rod - Graphite rod anode - Graphite electrode for gold plating. Graphite electrodes are ultimate for all coatings. The advantage is that in some coatings with stainless steel electrodes, the dislodged metal parts disturb the coating. This does not happen with graphite electrodes, because graphite also filters out contaminated liquids. With bath electroplating, they also need to be replaced occasionally as they slowly dissolve during the plating process. With pad electroplating, simply loosen the screw on the handle and replace with a new one. Diameter 6 mm, length approx. 9 cm Features Used for Doesn’t contaminate Cleaner Activating and electro-cleaning Its resistive properties help to heat the solution you’re plating with Chromium plating, which needs to be plated at 25 degrees celsius; its natural heating action helps to maintain the solution’s optimal temperature Low cost Can be used for all plating processes but carbon electrodes deteriorate over a period of time and discolour swabs (discolouration does not affect the plating quality)
Darkener for Black Ruthenium / Black Rhodium Betzmann Galvanik - Real Gold Fill 1 ml Darkener in 10 ml Black Ruthenium or Black Rhodium and get a darker Black Ruthenium or an darker Black Rhodium Surfaces.
Content: 0.01 Liter (€1,100.00 / 1 Liter)
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.