Black Ruthenium

€34.51*

Content: 0.05 Liter (€690.20* / 1 Liter)
(€29.00 ohne MwSt.)

Available, delivery time: 1-2 days

ml
Product number: BMG-089
PDF offer
Create PDF offer for this product Tip: Add multiple products to the cart and create the offer there. Logged in users get an individualized offer.
Product information "Black Ruthenium"

 Black ruthenium from Betzmann Galvanik

 

Product information “Black ruthenium bath with 5 gram / L Ru

 

The black ruthenium bath deposits dark to gray-black ruthenium layers. The ruthenium electrolyte works to maintain gloss and a high level of color consistency is achieved. The coatings are non-slip and impress with their decorative color. The maximum achievable coating thickness is 0.2-0.5 µm. For base metals or silverware, pre-gilding or a palladium layer is strongly recommended as an undercoat.

 

 

 

Operating data:

Ruthenium content: 5.0 g/l Ru

pH value: approx. 1

Density: approx. 12 g/cm3

Working conditions:

Voltage: 2.2-3 volts

Bath temperature: 65°C Exposure time: 2 min

Anode material: Mixed oxide anodes/platinized titanium

Anode/cathode area: 1 : 1

Fabric movement: required

Current density: 0.5-3.0 A/dm2

Bath filtration: from 10 liters

Deposition rate: 1-3 mg/amine

Deposition speed: 0.02µm/min at 1.5A/dm2

 

 

Precipitation data:

Hardness: approx. 800 HV

Layer thickness: max. 0.5 µm

Density: approx. 12 g/cm3

 

Safety:

 

   betzmann-galvanik-solution


Hazard statements

 

H314 Causes severe skin burns and eye damage.

Precautionary statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305 IN CASE OF CONTACT WITH EYES:

P351 Rinse cautiously with water for several minutes.

P338 Remove contact lenses, if present and if possible. Continue rinsing.

P313 Get medical advice/attention.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Similar Items

Darkener Solution for Black Ruthenium
Darkener for Black Ruthenium / Black Rhodium Betzmann Galvanik - Real Gold  Fill 1 ml Darkener in 10 ml Black Ruthenium or Black Rhodium and get a darker Black Ruthenium or an darker Black Rhodium Surfaces.    

Content: 0.01 Liter (€1,070.00* / 1 Liter)

€10.70*
Anode sleeve fuzzy
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

€2.38*
Carbon Electrode 6mm
Graphite round rod - Graphite rod anode - Graphite electrode for gold plating.  Graphite electrodes are ultimate for all coatings. The advantage is that in some coatings with stainless steel electrodes, the dislodged metal parts disturb the coating. This does not happen with graphite electrodes, because graphite also filters out contaminated liquids. With bath electroplating, they also need to be replaced occasionally as they slowly dissolve during the plating process.   With pad electroplating, simply loosen the screw on the handle and replace with a new one.   Diameter 6 mm, length approx. 9 cm    Features Used for Doesn’t contaminate Cleaner Activating and electro-cleaning  Its resistive properties help to heat the solution you’re plating with Chromium plating, which needs to be plated at 25 degrees celsius; its natural heating action helps to maintain the solution’s optimal temperature Low cost Can be used for all plating processes but carbon electrodes deteriorate over a period of time and discolour swabs (discolouration does not affect the plating quality)    

€5.90*