3A power rectifier - Adjustable laboratory power supply

Connection cable MINUS with 2 banana plugs and a crocodile clip:   Color black  Length 1.50 meters For connection directly to the device incl. a crocodile clip.   4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Gold-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

BMG-25A - Electroplating line - complete basic equipment with electrolyte set for chrome       With this complete set you achieve absolutely perfect results!   No matter what size, whether 10 meters of railing or a 28 inch rim, this machine can coat any surface.   With 100 ml electrolyte you usually manage 1m2, so it is quite productive!   With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chromed surfaces or chromed plastic (conductive layer) with all metals available on the market. e.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words everything we have on stock according to our price list.     Scope of delivery: 1x Power Rectifier, galvanic unit depending on availability with 25 A digital or analog, adjustable 2.5 to 15 Volt, power cord,            1x cable PLUS  1x cable MINUS with clamp 1x handle 3x stainless steel electrodes thick 6mm 1x Aluminium Electrode for Chromplating 6mm  6x sleeves   6x cups with lid, scaled   250 ml chrome  250 ml Nikel   250 ml Copper alkali   250 ml chrome remover for dechroming  250 ml Electrocleaner for degreasing  250 ml activator     Manual in German or English, training films, guides via PDF / E-MAIL  Free personal technical support, 12 months warranty, free personal training and support, unlimited and free advice from our team   Immediately ready for gilding! Can be supplemented with chrome - black rhodium - silver and much more.    High Power 25 or 40 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -    Technical data    Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 Kg.    

Stainless Steel Electrode 6mm:   This electrode is ideal for chrome stripping and electro-cleaning. To swap over to a stainless steel electrode, simply loosen the existing electrode and fit in the new one.  Stainless steel electrodes should not be used for any other processes such as the metal can cause contamination  of the plating solution resulting in considerable wastage of gold metal.    Selecting the best electrode for the job is very important.  

Betzmann Galvanik Pen Electroplating Pen - Product features at a glance: Our Galvanic Pen - Electroplating Pen consists of a graphite core that is ultimate for all coatings.       The pen for the finest and most delicate pen electroplating with graphite electrode. + 3 x felt tips + 2 x cable + alligator clip Suitable for plating most metals ideally suited for our BMG-25A and 50A electroplating systems.   The electroplating pens offer among others jewelers, watchmakers, jewelry manufacturers and also and also to all hobby electroplaters the possibility to galvanically refine pieces of jewelry in a simple way. The electroplating pens make it possible to carry out fine and very fine decorative electroplating work on jewelry and other small parts. In this way, jewelry can even be partially gold-plated. With the pen electroplating system it is possible to do a 2-tone precious metal coating even on very small surfaces. Whether in the studio, in the jewelry industry jewelers: the electroplating pens with the fine fiber pen attachments enable multifaceted color shades and sophisticated sophisticated results that will amaze you. The electroplating pens are also ideal for repair and touch-up work.  Electroplating Pens are ideally suited.   Directions for use: The plus cable is plugged in at the end of the grip piece, and a replaceable felt in the front. Please use one felt per electrolyte (they can be used for a very long time). The felts should be thoroughly soaked and moistened before use, as this is the only way they will pass the current.   The integrated graphite electrode is excellent for gold plating, chrome plating, silver plating, palladium plating, copper plating, zinc plating, black ruthenium, black chrome, black rhodium Nickel plating, rose gold, green gold, white gold and more.    Guide you will get when you buy the product.           

BMG-25 A electroplating system - Betzmann - electroplating - for professional results!    Complete set for self galvanizing - complete basic equipment for self gold plating!    With this complete set you achieve absolutely perfect results! There is no size limit for the parts.   No matter what size, whether 1 coin, screw, 10 meter railing or a 28 inch rim, this unit can coat any surface. With this device you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. E.g. 24 carat real gold (999) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words, everything we carry according to our price list.   Scope of delivery: 1x Electroplating unit with 25 Ampere, digital, adjustable 2.5 to 15 Volt, analog or digital depending on availability, power cord,  1x cable PLUS  1x cable MINUS with clamp 1x handle 3x stainless steel electrodes thick 6mm 1x stainless steel electrode thin 4mm   6x sleeves - pads mixed 6x cups with lid, scaled 250 ml gold (999 fine gold)  250 ml nickel   500 ml chrome remover for dechroming  500 ml Electrocleaner for degreasing  500 ml activator for nickel layer  Manual in German or English in PDF, training films online, manuals as PDF by email   Personal technical support free of charge, 12 months warranty, free personal instruction and support, unlimited and free advice from our team   Immediately ready for gilding!   High Power 25 Amp switch mode power supply with two digital measuring instruments for output voltage and output current   Technical data    Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 kg      

Connecting cable PLUS with banana plug:     Color RED  Length 1,50 meter For connection directly to the device      Color RED Length 1.50 meters For connection directly to the device incl. a stainless steel crocodile clip.     4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Gold-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

BMG-25 A Electroplating system - complete set complete basic equipment with electrolyte set and chrome      Please note: Even if we are talking about an entry-level model, you will achieve absolutely perfect results with this complete set!    No matter what size, whether 1 coin, screw, 10 meter railing or a 28 inch rim, this machine can coat any surface.      With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. e.g. 24 carat real gold (999) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - everything we have according to our price list    Scope of delivery:  1x electroplating unit with 25 Ampere, adjustable 2.5 to 15 Volt, power cable, depending on availability analogue or digital (does not matter for the application)  1x cable PLUS (blue,green,yellow,red)  1x cable MINUS with clamp  1x handle  3x stainless steel electrodes thick 6mm  1x aluminium electrode for chrome plating 6mm  6x sleeves   6x cups with lid  500 ml chrome  500 ml nickel  500 ml chrome remover for dechroming  500 ml Electrocleaner for degreasing  500 ml activator for nickel layer    Manual in German or English, training films, guides by email as pdf Free personal technical support, 12 months warranty, free personal training  and support, unlimited and free advice from our team  Immediately ready for chrome plating!      High Power 25 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -    Technical data    Operating voltage  230 Volt-AC/ 50Hz  Output voltage  3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side  Output current  25 amps constant  25 amperes short-term  Ripple & Noise  <50mV  load regulation  <200mV  line regulation  <50mV  Displays & movements  Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green  DC connection sockets  screwable pole terminals  Cooling  Fan  Security  Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts  Extras  dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability  Dimensions(WxHxD)  220x110x300 mm  Weight  3.5 kg        

Electrode Handle: The electrode handle is is used to hold the various electrodes up to 6mm required throughout the plating process.The Electrode Handle will hold all of our rod-shaped electrodes including the stainless steel electrode, which should be used for chrome stripping and cleaning only, the carbon electrode which can be used for plating all metals and the platinum electrode which can also be used for plating all metals.  

BMG-25A - Betzmann-Galvanik - Electroplating plant complete basic equipment kit     Herewith you achieve absolutely perfect results! No matter what size, whether 10 meters of railing or a 28 inch rim, this machine can coat any surface. With 100 ml electrolyte you usually manage 1m2, so it is quite productive!   With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. e.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words everything we have on stock according to our price list.   Scope of delivery: 1x Electroplating unit 25 A digital, adjustable 2.5 to 15 Volt, analogue or digital depending on availability, mains cable,  1x cable PLUS  1x cable MINUS with clamp 1x handle 3x stainless steel electrodes thick 6mm 1x stainless steel electrode thin 4mm  6x fabric pads mixed 6x cups with lid, scaled  100 ml gold electrolyte 8 G./L. is sufficient for 1m2 surface 100 ml nickel   250 ml chrome remover for dechroming  250 ml Electrocleaner for degreasing  250 ml activator for nickel layer  Manual in German or English as PDF, training films, guides as PDF /EMAIL Personal technical support free of charge, 12 months warranty, free personal instruction and support, unlimited and free advice from our team   Immediately ready for gilding! Can be supplemented with chrome - black rhodium - silver and much more.    High Power 25 Amp switch mode power supply with two digital measuring instruments for output voltage and output current -  Technical data  Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 kg

Betzmann Galvanik - Complete tampon brush plating Set with extensive accessories and electrolyte set with 500 ml each for GOLD PLATING   There is no size limit from 25 A! No matter if coins, screws or 20 meters stainless steel pipe in one piece!  With this complete electroplating system you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. E.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words, everything that we carry according to our price list.   Scope of delivery:    1x Electroplating unit with 25 Ampere, adjustable 2.7 to 15 Volt, analog or digital depending on availability, power cord.            3x cable PLUS   1x cable MINUS with clamp  3x handle  3x stainless steel electrodes thick 6mm  1x stainless steel electrode thin 4mm  10x sleeves / pads mixed 10x cup with lid, scaled 500 ml gold electrolyte 8 G./L. is sufficient for approx. 5m2 surface   250 ml nickel 250 ml alkaline copper   1000 ml chrome remover for dechroming  1000 ml Electrocleaner for degreasing  1000 ml activator for nickel layer  - 3 x plastic electroplating work trays of different sizes  -1 x spray bottle -1 x Manual in German or English as pdf, training films and guides online and as pdf  - Personal technical support in Germany free of charge, 12 months warranty - Free training with us, individual lessons, personal instruction, unlimited and free advice from our team  - Support at trade fairs and presentations, advertising measures     High Power 25 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -   Technical data    Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 kg  

Anschlußkabel gewickelt und ausziehbar bis 3 Meter von Betzmann Galvanik   Perfektes Equipment, ausziehbares Profikabel  für Plus- oder Minuskontakt.         Coiled Cable:   Fully extended they are approximately five feet long and retracted about one foot.  We have designed custom cables intended for maximum life. The cables are doubled for strength and the banana jack wire connections are  sealed from exposure to the corrosive solutions.