Gold Plating Kit

Adjustable power supply - 3 amp basic unit - Small electroplating - Electroplating systems - Electroplating unit - Betzmann Galvanik  With this cost-effective laboratory power supply unit, you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market, whether mobile or stationary. There is no size limit with this power supply! Whether coins, screws or 20 meters of stainless steel pipes in one piece!    You can use it to coat all electrolytes available on the market, such as   Real Gold (999 fine gold) - rose gold, white gold, green gold, gold tones from 24 to 9 carat - Silver - Nickel - Alkaline / acidic bright copper - Chrome - Black chrome - Rhodium - Black rhodium -  Palladium - Platinum - Zinc - Tin - White bronze    Adjustable laboratory power supply 0...18 Volt /0...3 Ampere - safety transformer Inexpensive power supply unit with adjustable voltage and current and green illuminated display. Perfect power supply unit for most tasks in the workshop, school, laboratory and hobby sector, for charging batteries etc. This device is RiSU-compliant and has a built-in safety transformer in accordance with DIN EN 61558-2-6:2009.   Technical data: Operating voltage: 230 V~ Output voltage: 0...18 V- Current limitation: 0...3 A Residual ripple: < 1 mV Temperature-controlled fan Short-circuit proof Operating temperature: 0...40 °C Weight: 3.2 kg Dimensions (WxHxD): 95x148x235 mm Scope of delivery Power supply unit IEC mains cable Connection cables with crocodile clips Instruction manual  

Perforated and polished stainless steel plate with practical drip tray and edge protection from Betzmann Galvanik :   Attention: Article photos can deviate!     This accessory is a real "must have" in pad electroplating and consists of a practical collecting tray and perforated and polished stainless steel perforated plate. Here, the minus can be connected directly and the part to be plated can be placed.   The tray with the dimensions: 50 x 34 x 14 cm is very easy to clean. This accessory is also suitable for work on vehicles or in objects. Simply place the tub under the surface to be coated and you simply catch all liquids.   Dimensions: work surface metal plate approx. 34 x 45 cm   Tub: 50 cm x 34 x 14 cm   Translated with www.DeepL.com/Translator (free version)

  Palladium Solution from Betzmann Galvanik with 10 Gramm per Liter - as nickel substitute - barrier layer or as hard decorative top layer!    Palladium electrolyte - The allergen-free alternative to nickel! Palladinizing or plating with palladium is a rather rarely used galvanic coating. However, palladium plating can offer some advantages, especially as a substitute for galvanic nickel plating with a nickel electrolyte.  The advantages of palladium electrolyte compared to electroless nickel plating: Typically, a nickel electrolyte is used to apply a barrier layer of nickel between copper and gold, preventing the two metals from mixing. However, a palladium plating offers several distinct advantages over the nickel electrolyte: Palladium is more noble than nickel, meaning there is no surface corrosion, and the palladium does NOT require extra activation prior to gold plating as nickel does. The deposition rate and efficiency are excellent, i.e. there is no unwanted gas evolution. The electrolyte deposits silvery white, very bright palladium which can be used as a bright "finish". Gold plating with the Betzmann gold electrolyte for pin electroplating achieves an optimum result on palladium. In contrast to nickel electrolyte, palladium is not carcinogenic and is therefore also permitted for private users!  A very good combination for gold plating of almost all metals is:  Alkaline or acid copper depending on the metal, palladium and finally gold.  All necessary electrolytes are available in our store. Palladium can be plated on the following metals:  Copper, nickel, brass, silver, gold, on all dechromed surfaces.   Recommended voltages:  Pen - Brush electroplating: from 3 volts - Bath electroplating: 3 - 4 volts. Recommended is graphite electrode or platinum electrode from our store. Palladium content: 10 grams per liter   Main benefits;  Makes a great alternative to rhodium plating giving an authentic 18 carat white gold or platinum plated look. palladium plating solution (unlike rhodium) doesn’t etch materials made of calcium carbonate such as pearl and coral, so you won’t have to worry about masking out these materials before submerging them in your palladium plating bath. can be used as a substitute for nickel as a barrier layer for gold plating on copper and its alloys. can be used as an alternative to silver as it doesn’t tarnish and is hard-wearing. Very low porosity – excellent for corrosion protection. Readily wettable by solder and dissolves a lot more slowly than gold in the solder making it an excellent top coat over gold for electrical contacts. Operating Parameters and Deposit Data   Voltage Range 3.0 – 3.5 Temperature 18 – 25 °C Palladium Concentration 10g/l Electrode Carbon or Platinum Palladium content in plate 99.9% (balance carbon, nitrogen) Lightness (L*) of deposit 65 (Cielab) Plating Rate at (3.5 volts, carbon electrode) 0.6 micron per minute Hardness 488 Hv Density of deposit 11.85 g/cm3 Stress Stressed Special storage requirements None Shelf life 1 – 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) None: Not classified as dangerous for transport       Signalword: Warning    H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INFECTED:P310 Immediately call a POISON CENTER/doctor/. Operating Parameters and Deposit Data