MPU - Metal Polish Ultra

Rosegold Solution from Betzmann Galvanik This Rose Gold Brush/Pen Plating Solution (18 Karat) doesn’t have to be mixed beforehand. It can be used for both brush and pen plating. You can use either the Platinum Electrode (2.5 – 3.0 volts) or the Carbon Electrode (2.0 – 2.5 volts) with this solution. One of the outstanding qualities of the solution is that it plates very fast compared to other brush plating solutions. You can compare the plating rates using our online brush plating calculator on the links bar above.   Failure to observe the above precautions will result in the degeneration of the gold component in the solution. This will cause copper-rich plating, which will tarnish quickly.   Please see below for more products related to Rose Gold Brush/Pen Plating Solution (18 Karat). Recommended electrode: Carbon, Voltage: 3 – 3.5     Gold Concentration 9.1g/l Voltage Range (Platinum Electrode) 2.5 – 3.0 volts* Voltage Range (Carbon Electrode) 2.0 – 2.5 volts* Electrode Carbon Alloy consistency (at mix ratio 1Mixer:10 K-Gold) 75% Gold, 25% Copper Colour designation 5N Temperature 20 – 25 °C Plating Rate at (3.3 volts, carbon electrode) Approx. 0.5 microns per minute (max) Hardness Hard: In excess of 250 – 300 Hv Density of deposit 14.4 g/cm3 Stress Medium Special storage requirements Away from sunlight Shelf life 1-2 years (please refer to notes below) Health and Safety classification Irritant Special considerations None (cyanide-free) Transport (UN number) None: Not classified as dangerous for transport * The lower voltage range should be applied when using smaller swabs. Notes: Remove any existing layers of rose gold before plating. Store in hermetically sealed container with lid firmly closed. Small volumes for day-day use should be stored in a stoppered syringe. Higher voltages can be used with plating rates in excess of 3 micronsper minute (spot).A lower voltage range is recommended when plating above 1 micron to preventdullness and subsequent polishing.

PRODUCT PRESENTATION - GOLD ELECTRTOLYT 999 FINE GOLD - 23,8 CARAT  WITH 8 GRAMS OF GOLD PER LITER   Do-it-yourself gold plating has never been so easy. Our gold electrolyte from Betzmann Galvanik may be purchased by anyone. Whether it is for use in highly professional laboratories, industry, luxury companies, to the use in the hobby, main or secondary trade, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,   The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition.  The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe.  Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative causes a very long shelf life of at least 2 years and prevents sedimentation, as it occurs with many other gold electrolytes. The gold electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..   Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm length or the flat platinum electrode, because platinum electrodes can build up very thick layers far over 10 microns and more. Graphite electrodes can also be used.  Gold content: 8 grams per liter    The procedure for gilding: Recommended to first polish the surface to a shine - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts   Operating Conditions and Deposit DataVoltage range3 – 5 voltsTemperature14 – 25 °CGold concentration8 g/lElectrodePlatinum or Carbon (see notes)Gold content in plate99.9% (balance carbon)Plating rate at (3.5 volts, Platinum electrode)Approx. 0.5 micron per minute (spot)Cathode efficiency (3.5 volts, Platinum Electrode)35 – 40%Maximum plating thickness5 micronsHardness220 – 230 HvDensity of deposit19.3 g/cm3StressMedium stressSpecial storage requirementsAway from sunlightShelf life1 – 2 yearsHealth and Safety classificationHarmfulSpecial considerationsContains potassium cyanide (0.3%)Transport (UN number)None: Not classified as dangerous for transport

The metal care product is used for cleaning and polishing surfaces.    With the metal care almost all types of surfaces (except textiles) can be cleaned, treated and sealed with little effort and completely without water! Metal Care from Betzmann Galvanik does not contain acids or alkalis. It is ph-neutral and slowly biodegradable. It is even machine applicable by means of an eccentric polishing machine.      Some examples of use:  Car, boat, motorcycle, bicycle, kitchen, bathroom, ceramics, glass, leather, imitation leather, amarture board, plastic, camper, stainless steel, chrome, glass panes, TV, monitors, glasses, helmets, tiles, mirrors, shoe sole sides,  cell phone displays, store counters, high-gloss fronts, foiling (matt/glossy), advertising and company signs, solar systems, solariums, whirlpools, pools, rims, ovens, acrylic glass, ceramic hobs, CNC machines, chrome fixtures in the bathroom and much more.      Application:  Shake bottle briefly before use. Apply the metal care to the object to be treated and distribute/massage.  Then polish or wipe the lotion away with a clean microfiber cloth.  It can be applied by hand or by machine. For machine application, the care product can be used like a normal polish. For this purpose, apply the agent to the machine polishing attachment and process with gentle pressure. Then polish or wipe off the lotion with a clean microfiber cloth. or wipe clean. Due to its additional cleaning function, the metal care replaces a large number of polishes for automotive reconditioners. Smooth surfaces appear  after the application in their original shine and are sealed (Lotus effect). Dull lacquers are beautifully matt again after application and dirt and grease residues are grease residues are removed. Glass panes become streak-free clean after application and less susceptible to soiling (sealed).  With each new or further application, the protective film/sealing is further built up and the pores in the surface are closed. The product does not contain chalk or wax ingredients like common polishes. Thus also plastics can be polished effortlessly and appear again in the old shine (no white stripes or residues on plastic). The sealing usually lasts between 2-8 weeks (depending on the area of application and stress on the polished object). object).    Notice:  The product should not necessarily be used in the blazing sun, otherwise it may happen that you have to work harder to polish up the product One should also not use the metal care on smooth floors, as this surface then becomes even smoother and possible slipping danger exists.  

Metal-Prep being used to clean and brighten the surface before plating. 

PRODUCT PRESENTATION - HIGH SPEED GOLD ELEKTRTOLYT 999 FINE GOLD - 23,8 CARAT  WITH 12 GRAMS OF GOLD PER LITER   More gold in the electrolyte means even faster plating, thicker layers with the same working time or more surface area. Also the purchase of the high speed gold is cheaper, because you buy more gold per liter at a lower price. Do-it-yourself gold plating has never been easier. Our gold electrolyte from Betzmann Galvanik can be purchased by anyone. So whether it is for use in the highly professional use of laboratories, industry, luxury companies, to the use in the hobby, main or in the side business, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,   The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition.  The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe.  Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes. The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating!  The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..     Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more. Graphite electrodes can also be used.  Gold content: 12 grams per liter    The procedure for gold plating: It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts    Operating Conditions and Deposit DataVoltage Range3.0 – 4.5 voltsTemperature14 – 25 °CGold Concentration12g/lElectrodePlatinum or Carbon (see notes)Gold content in plate99.9% (balance carbon)Plating Rate at (3.5 volts, Platinum electrode)Approx. 0.8 micron per minute (spot)Hardness220 – 230 HvDensity of deposit19.3 g/cm3StressMedium stressSpecial storage requirementsAway from sunlightShelf life3 – 6 monthsHealth and Safety classificationHarmfulSpecial considerationsContains potassium cyanide (0.3%)Transport (UN number)None: Not classified as dangerous for transport Notes:We strongly advise against the use of stainless steel anodes for most of our plating processesPlating rates are calculated over a sample area which is permanently covered by swab.