Gold Electrolyte 8 g/L – High-Performance Gold Plating SolutionFast Deposition & Brilliant Gold CoatingsThis high-quality gold electrolyte with 8 g/L gold content is designed for demanding and professional gold plating applications. It enables fast deposition rates, intense gold color, and uniform, highly adhesive coatings.Suitable for bath plating, brush plating, and pad plating – ideal for jewelry, technical components, and industrial use.Key Benefits✔ High gold content (8 g/L) for fast plating results✔ Bright, rich gold color✔ Uniform and highly adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for professional and industrial applications✔ Compatible with pre-plating (silver, palladium, platinum)Technical SpecificationsParameterValue / RecommendationGold Content8 g/LVoltage (Bath)approx. 2.5 – 4.0 VVoltage (Brush/Pad)approx. 3.0 – 6.0 VTemperature18 – 28 °CpH Valueneutral to slightly acidic (system dependent)ElectrodesPlatinum or graphiteDeposition RatefastLayer Thicknessadjustable via time & current💡 Note: Higher gold content allows faster deposition and thicker layers in a shorter time.ApplicationsJewelry (rings, chains, watches)Electrical contacts and connectorsTechnical componentsRepair and restoration of gold coatingsProfessional and industrial productionWhen to Use 8 g/L Gold ElectrolyteApplicationSuitabilityFast plating⭐⭐⭐⭐⭐Thick layers⭐⭐⭐⭐⭐Professional use⭐⭐⭐⭐⭐Fine decorative plating⭐⭐⭐⭐☆👉 Conclusion: Ideal for users who need efficient, fast, and high-quality gold plating.Application – Step by StepClean and degrease the surface→ essential for adhesionActivate the material→ use an appropriate activatorGold plating process→ apply electrolyte (bath, brush, or pad)Post-treatment→ rinse and finish💡 Pro Tip: Surface preparation determines up to 80% of the final coating quality.CompatibilityThis gold electrolyte can be used with:Galvanic systems (bath plating)Brush plating devicesPad plating systems👉 Also compatible with:Silver, palladium, or platinum pre-platingDifferent electrode types (platinum recommended)Practical ExamplesGold plating a ring within minutesFast coating of electrical contactsConsistent results in series productionFrequently Asked Questions (FAQ)Why use 8 g/L gold electrolyte?It enables faster deposition, thicker coatings, and professional results.Is it suitable for beginners?Yes, with proper preparation and basic knowledge, it is easy to use.How durable is the gold coating?With correct application, the coating is highly durable and wear-resistant.Which electrode is recommended?Platinum electrodes provide the most stable and high-quality results.Recommended AccessoriesPower supplies and rectifiersElectrodes (platinum or graphite)Cleaners and activatorsComplete galvanic systems👉 The right combination of equipment, electrolyte, and electrode ensures optimal results.Order Gold Electrolyte 8 g/L NowAchieve fast, brilliant, and professional gold plating results with a high-performance electrolyte.👉 Order now and start plating with precision and efficiency.

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.

Gold Flash Electrolyte (BMG‑084.5) Ultra‑Thin Gold Plating Solution for Base and Decorative Layers Short Description The Gold Flash Electrolyte (BMG‑084.5) is a specialized electroplating solution designed to deposit a very thin, high‑purity gold layer (“flash plating”). This ultrathin gold layer serves as an ideal base coat or decorative coating on metallic surfaces. real-gold.de Applications This gold flash electrolyte is suitable for: Very thin gold coatings („flash“ plating) Adhesion base for subsequent plating layers Decorative accent coatings on jewelry and metal parts Electrically conductive surfaces and contacts Foundation for further electroplating processes It provides excellent adhesion and a bright metallic appearance with minimal material usage. real-gold.de How Flash Gold Plating Works (Simple Explanation) Flash gold plating deposits a very thin gold layer using direct current: Clean and degrease the surface Activate for best conductivity Flash plating: Apply current – gold ions are reduced on the surface Optional finish: Rinse and dry or apply further coatings This process is ideal for achieving a thin but continuous gold surface layer with low material consumption. real-gold.de Benefits of Gold Flash Electrolyte Ultra‑thin, uniform gold coatings Excellent adhesion on metal surfaces Suitable for decorative and functional uses Compatible with tank, brush, and pad plating Ideal as base layer for additional plating steps real-gold.de Typical Parameters PropertyValue / RangeElectrolyte typeGold flash plating solutionGold contentapprox. 2 g/LLayer purity99.9 % goldVoltage4.0–6.0 VTemperature14–25 °CDeposition rateUltra‑thin “flash” layerAnodePlatinum or graphiteHardnessapprox. 180–190 HVDensityapprox. 19 g/cm³ real-gold.de Application Notes Prepare surface: Clean and degrease thoroughly. Activate: To enhance conductivity before plating. Flash plating: Run the electrolyte at recommended voltage. Finish: Rinse, dry, and optionally proceed with other layers. Safety Information Wear protective gloves, goggles, and suitable clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose of waste according to local regulations Conclusion The Gold Flash Electrolyte (BMG‑084.5) delivers ultra‑thin and highly adherent gold layers that are perfect for use as a base or decorative finish in electroplating. Its versatility and ease of use make it suitable for both hobby and professional electroplating applications where fine, bright gold coatings are desired. real-gold.de

Rose Gold Electrolyte BMG‑118AM High-quality 18 K rose gold plating solution for decorative and functional coatings Short Description The Rose Gold Electrolyte BMG‑118AM is a ready-to-use electroplating solution for the deposition of 18 K rose gold layers on conductive metal surfaces. This cyanide-free plating bath produces a warm, reddish-golden tone characteristic of 18 K rose gold. The electrolyte can be used in tank, brush, and pen/peg plating and provides fast deposition and attractive appearance. Applications The rose gold electrolyte is used for: Decorative rose gold plating of jewelry, watch cases, and accessories Visual enhancement of metal surfaces with a warm rose-gold color Technical surfaces requiring durable rose gold finishes Multi-layer plating systems (e.g., base metal → rose gold) Applications needing a uniform, glossy 18 K rose gold coating Rose gold plating combines attractive color with good mechanical properties, suitable for decorative and functional applications. How Rose Gold Plating Works (Simple Explanation) Rose gold plating uses an electrolytic process in which a gold-copper alloy from the solution is deposited on the workpiece: Surface Preparation: Thoroughly clean and degrease the part. Activation: Optionally activate chemically for optimal adhesion. Rose Gold Plating: Apply direct current; metal ions are reduced from the electrolyte to form an 18 K rose gold layer. Finishing: Rinse and dry the plated part. The resulting layer is glossy, warm, and reddish-golden, typical for rose gold alloys. Benefits of Rose Gold Electrolyte BMG‑118AM Attractive 18 K rose gold color with warm reddish-golden tone Cyanide-free electrolyte with stable plating chemistry Fast deposition rate compared to many other plating solutions Suitable for tank, brush, and pen/peg plating Can plate directly on brass, nickel, silver, or gold substrates High-gloss, adherent layers with good corrosion and wear resistance Versatile for decorative and functional plating applications Technical Parameters PropertyValue / RangeElectrolyte typeRose gold plating solutionAlloy type18 K rose gold (gold-copper alloy)Gold contentapprox. 8 g/LCopper contentapprox. 3 g/LpHca. 7.2–8.0 (neutral)Density>1.07 g/mLVoltage1.4–1.8 VBath temperature55–60 °CAnode materialPlatinum-coated titaniumCurrent density0.1–0.5 A/dm²Deposition rateapprox. 45 mg/A·minPlating speedapprox. 0.1 µm/minMaximum layer thicknessup to 10 µmLayer hardness380–400 HV Practical Application Tips Preparation: Clean and degrease workpieces thoroughly. Optionally activate chemically for uniform adhesion. Plating: Maintain bath temperature at 55–60 °C and recommended voltage/current settings. Ensure even movement or agitation for uniform layer formation. Mask areas if selective plating is required. Post-treatment: Rinse with clean water and dry after plating. Light polishing can enhance shine if desired. Safety Information Rose gold electrolytes contain chemical components and must be handled carefully: Wear gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work only in well-ventilated areas Do not ingest; keep out of reach of children Dispose of waste according to local chemical regulations Even though the electrolyte is cyanide-free, chemical reactions and fumes remain potential hazards. Conclusion The Rose Gold Electrolyte BMG‑118AM is a powerful and versatile 18 K rose gold plating solution. It provides fast, glossy, and warm-colored layers suitable for decorative jewelry, accessories, and technical applications. Easy to use in tank, brush, or pen/peg plating, it is ideal for hobbyists, workshops, and professional plating operations. Stable plating parameters ensure high-quality, consistent rose gold finishes.

Adhesive labels for electrolytes for labeling and better identification of storage beakers or corresponding containers.  From “A” for activator to “Z” for zinc or tin The labels are included with the purchase of the device set.  Dimensions 10x8 cm After ordering, please let me know which label you would like by sending an email to:   [email protected].

Gold Electrolyte 4 g/L – High-Quality Gold Plating Solution for Professional ResultsEasily Plate Metals with Gold – Even, Durable, and ProfessionalThis Gold Electrolyte 4 g/L allows you to achieve reliable, even, and high-quality gold plating on a wide range of metals. Suitable for both professional galvanic applications and DIY users, it delivers a bright, durable, and wear-resistant gold layer.Ideal for jewelry, technical components, and repair work.Key Benefits at a Glance✔ High gold content (4 g/L) for visible, premium results✔ Even and bright gold coating✔ Fast deposition rate for efficient processing✔ Excellent adhesion on various metals✔ Suitable for bath, brush (tampon), and pen plating✔ Beginner-friendly and professional-grade performanceApplicationsThis gold plating solution is ideal for:Jewelry plating (rings, chains, pendants)Electrical and technical componentsRepair and restoration of gold surfacesSmall-scale production and DIY projectsStep-by-Step ApplicationCleaning: Thoroughly degrease and clean the surfacePre-treatment: Apply activator or intermediate layer if requiredPlating: Apply the gold electrolyte evenly (bath or brush plating)Post-treatment: Rinse with clean water and dry👉 Tip: Proper pre-treatment is essential for strong adhesion and consistent results.Technical SpecificationsParameterValueGold content4 g/LApplication methodsBath, brush (tampon), and pen platingSuitable metalsCopper, brass, nickel, stainless steel*Working temperature20–25 °CpH value4–6Conductivityapprox. 10 mS/cmConditionReady-to-use solutionShelf lifeapprox. 12 monthsLayer thicknessapprox. 0.1–0.5 μm per hourDepositionEven and highly adhesive*Stainless steel requires proper pre-treatment.Who Is This Product For?Beginners in electroplatingJewelry manufacturers and goldsmithsWorkshops and industrial usersRepair and restoration professionalsFrequently Asked Questions (FAQ)How long does the gold plating last?With proper application, the coating is durable and wear-resistant.Can I plate stainless steel?Yes, but appropriate pre-treatment is required for optimal adhesion.Is this suitable for beginners?Yes, with the right equipment and basic guidance, it is easy to use.What equipment do I need?A power supply, electrodes, and accessories for bath or brush plating.How thick is the gold layer?Approximately 0.1–0.5 μm per hour, depending on the application.Package IncludesGold Electrolyte 4 g/L in the selected quantityStorage and SafetyStore in a cool, dark placeProtect from contaminationUse protective gloves and eyewearKeep out of reach of childrenStart Professional Gold Plating TodayThis Gold Electrolyte offers a reliable and versatile solution for high-quality gold plating—efficient, precise, and easy to use.👉 Order now and achieve professional results!