Silber High Speed 75 G. /L.
€13.80
Available, delivery time: 1-2 days
Product information "Silber High Speed 75 G. /L."
Silver High-Speed Electrolyte BMG‑105.6
High-performance silver plating solution – 75 g of silver per liter for fast, high-quality coatings
Short Description
The Silver High-Speed Electrolyte BMG‑105.6 is a high-performance electroplating solution designed for the rapid deposition of high-quality silver layers.
With a silver content of 75 g/L, this electrolyte enables a significantly higher deposition rate than standard silver baths, producing bright, reflective, and conductive silver coatings in less time. The layers are ideal for both decorative and functional applications.
Applications
This high-speed silver electrolyte is typically used for:
-
Decorative silver plating, e.g., jewelry, accessories, and design objects
-
Functional coatings with improved electrical and thermal conductivity
-
High-throughput applications on large surfaces
-
Tank, brush, and pen/peg plating, depending on equipment
-
Multi-layer plating systems (e.g., copper → silver → gold)
The higher silver concentration accelerates deposition while maintaining consistent quality.
How High-Speed Silver Plating Works (Simple Explanation)
Silver plating is an electrolytic process, where silver ions are reduced under direct current and deposited onto a prepared metal surface:
-
Surface Preparation: Thoroughly clean and degrease the workpiece to remove oils and contaminants.
-
Activation: Activate the surface chemically if needed for optimal adhesion.
-
Electroplating: Apply direct current; silver ions migrate and form a bright silver layer on the surface.
-
Finishing: Rinse and dry – the surface remains reflective and uniform.
The high silver content allows fast and efficient deposition without compromising appearance or conductivity.
Benefits of Silver High-Speed Electrolyte BMG‑105.6
-
High silver content (75 g/L) for faster deposition and higher productivity
-
Bright, reflective silver surface
-
Enhanced electrical and thermal conductivity
-
Suitable for decorative and functional coatings
-
Compatible with tank, brush, and pen/peg plating
-
Robust and uniform layers even at high throughput
Technical Parameters
| Property | Value / Range |
|---|---|
| Electrolyte type | Silver High-Speed plating solution |
| Silver content | approx. 75 g/L |
| pH | slightly acidic to neutral, optimized for high deposition rates |
| Operating temperature | 15–30 °C |
| Voltage (tank plating) | 1.5–4.0 V |
| Voltage (brush/pen plating) | 3–7 V |
| Current density | 0.5–4 A/dm² |
| Anode material | Graphite or pure silver |
| Typical layer thickness | 2–10 µm |
| Surface appearance | High-gloss, reflective |
| Layer purity | >99.9 % silver |
| Conductivity | Very good |
| Shelf life | 1–2 years |
Note: Values serve as practical guidelines; results may vary slightly depending on equipment, workpiece, and process conditions.
Practical Application Tips
Surface Preparation:
-
Remove grease, oils, and contaminants by thorough cleaning and degreasing.
-
Chemical activation may be performed to improve adhesion.
High-Speed Silver Plating:
-
Operate the electrolyte at recommended temperature, voltage, and current density.
-
Ensure even agitation or movement for uniform layer formation.
-
Mask areas if selective plating is needed.
Post-treatment:
-
Rinse with clean water and dry after plating.
-
Light polishing can enhance gloss if desired.
Safety Information
Silver plating solutions contain chemical components and must be handled safely:
-
Wear gloves, safety glasses, and protective clothing
-
Avoid contact with skin and eyes
-
Rinse immediately with water if contact occurs
-
Work only in well-ventilated areas
-
Do not ingest; keep out of reach of children
-
Dispose of waste according to local regulations
Silver salts and electrolytes can be irritating; proper protection is essential.
Conclusion
The Silver High-Speed Electrolyte BMG‑105.6 is a powerful and efficient plating solution that produces bright, reflective, and conductive silver layers at high speed.
Its high silver content and ease of use ensure fast throughput with excellent layer quality.
Ideal for jewelry, technical components, or large-surface applications, this electrolyte delivers consistent, high-quality results for hobbyists, workshops, and professional plating facilities.
Pictograms:
Hazard statements
H315 Causes skin irritation.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long-lasting effects.
Safety instructions
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P391 Collect spillage. P501 Dispose of contents/container in accordance with local/national regulations.
Similar Items
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.
Silver Electrode Ø 6 mm (BMG‑009) Short Description The Silver Electrode Ø 6 mm is a high‑purity silver anode (Ag 99.99 %) designed for electroplating applications. It provides a controlled supply of silver ions to the plating bath, enhances deposit quality and reduces silver consumption in bath, pen and pad plating processes. Product Description Made from electrolytically refined, unalloyed fine silver with a diameter of 6 mm and length of approximately 100 mm, this electrode delivers exceptional electrical conductivity and consistent performance. Its high purity (Ag 99.99) supports stable and efficient plating. When used as a sacrificial anode, the silver dissolves into the plating solution to maintain silver ion concentration, helping to save 40 %–50 % on silver solution costs by reducing the need for frequent top‑up solutions. Fine silver also has the highest electrical and thermal conductivity of all metals, promoting efficient current flow and stable electrochemical conditions. Typical Applications Silver plating of metal parts via bath, pen or pad methods Lowering contact resistance on conductive surfaces Improving solderability of components Research, electrochemistry and laboratory experiments As an ionization electrode in certain air or water treatment setups Key Benefits High‑purity fine silver (Ag 99.99 %) for consistent results Excellent conductivity: supports stable current delivery Reduced silver consumption: more cost‑effective plating Universal use: compatible with multiple plating methods Reliable performance for repeated use Usage Instructions Use with a suitable silver plating electrolyte depending on the method. Connect the silver electrode as the anode to the positive terminal of your power supply. The workpiece acts as the cathode (negative terminal). Adjust voltage and current according to electrolyte recommendations (often low volt range) for even deposits. Conclusion The Silver Electrode Ø 6 mm is an essential accessory for producing high‑quality silver deposits in electroplating applications. Its high purity, conductivity and cost‑saving potential make it ideal for hobbyists, workshop users and professionals alike
Silver tarnish protection on aqueous basis from Betzmann Galvanik Product information Silver tarnish protection based on nanotechnology gloss, color and electrical properties are retained simple dipping process biologically harmless, skin-friendly and hypoallergenic for decorative and technical applications suitable for rack,barrel and strip applications Bath description: The passivation process is based on an aqueous basis, in which the organic inhibitor is present in a finely divided emulsion. The passivation layer is applied by The passivation layer is applied by immersion, creating a transparent, organic protective film that preserves the appearance and good electrical properties of silver, e.g. contact resistance and conductivity. The good solderability and bondability of silver is not affected by the passivation layer. Generally, passivation is used to protect silver surfaces from the influence of sulfur compounds during storage. It can also be used to protect copper, palladium and thin gold layers from tarnishing. Due to its chemical composition, the protective film has lubricating properties, which is of great advantage for certain electrical connection elements. The plugging and unplugging forces are significantly reduced by the silver tarnish protection from Betzmann Galvanik. This applies not only to silver surfaces, but also to gold-plated sliding and plug contacts. It is also worth noting that the anti-tarnish layer consists of non-hazardous substances, and that its protective effect allows short-term thermal stress up to 300°C. Identification of the mixture: Signalwort: Danger HAZARD STATEMENTS H225 Highly flammable liquid and vapor. H304 May be fatal if swallowed and enters airways. H336 May cause drowsiness and dizziness. H412 Harmful to aquatic life with long lasting effects. P301+P330+P331 IF INFECTED: Rinse out mouth. DO NOT induce vomiting. P310 Immediately call POISON CENTER or doctor. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P260 Do not breathe dust/fume/gas/mist/vapor/aerosol. P210 Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. EUH066 Repeated exposure may cause skin dryness or cracking.
Content: 0.1 Liter (€180.00 / 1 Liter)
Graphite Electrode Ø 6 mm (BMG‑010) Short Description The Graphite Electrode Ø 6 mm (BMG‑010) is a durable, chemically inert electrode rod made from high‑density fine‑grain graphite. Designed for use as an anode or electrode in electroplating processes, it is ideal for bath, pen, and pad plating applications where a clean, metal‑free current supply is essential. Product Description This graphite electrode is manufactured from highly compressed fine‑grain graphite, which dissolves only slowly in electrolytes. Unlike metallic anodes, graphite does not shed contaminating metal particles, ensuring cleaner coatings and higher deposit quality. The 6 mm diameter rod, with an approximate length of 95 mm, fits standard plating fixtures, holders, and pen plating tools, making it easy to integrate into various electroplating setups Typical Applications Electroplating processes (e.g., silver, gold, copper, black nickel, chrome, white bronze) Pen, bath, and pad plating Activation and pre‑treatment steps Counter‑electrode or anode use in a wide range of electrolytes Situations where metal contamination must be avoided Key Benefits Chemically inert: prevents unwanted metal ion contamination in the plating bath. Versatile: compatible with most electroplating chemistries and techniques. Slow wear: dissolves gradually, extending service life. Affordable: cost‑effective solution for frequent use. Easy to use: fits common plating holders and pen plating tools. Material & Dimensions Material: High‑density fine‑grain graphite Diameter: 6 mm Length: approx. 95 mm (other lengths may be available) Practical Tips Ensure electrodes are clean and free of oils before use. Replace electrodes periodically as they slowly dissolve during electroplating. Graphite’s mild warming effect can help stabilize bath temperature during plating. Conclusion The Graphite Electrode Ø 6 mm is an effective and reliable anode/electrode for a wide range of electroplating applications. Its inert behavior, broad compatibility, and metal‑free current delivery make it a solid choice for hobbyists, workshops, labs, and professional plating operations.