Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Nickel Remover / Nickel Stripper – Chemically Remove Nickel Plating with Professional ResultsProfessional Nickel Stripper for Electroplating, Jewellery, Restoration and Industrial ApplicationsThe Nickel Remover from Betzmann Galvanik is a highly effective, ready-to-use chemical solution designed for the selective removal of electroplated nickel coatings and electroless nickel (Ni-P) deposits. The Nickel Stripper works without electricity, allowing nickel coatings to be removed safely, efficiently and with minimal attack on the base material.Whether you are working in electroplating, jewellery manufacturing, restoration, precision engineering or industrial metal finishing, this professional nickel stripper provides a fast, reliable and economical solution for removing worn, damaged or incorrectly applied nickel coatings prior to replating.Your Benefits at a GlanceChemically removes nickel without electricityReady to use – no mixing requiredRemoves electroplated nickel coatingsRemoves electroless nickel (Nickel-Phosphorus / EN)High stripping rate of up to 50 microns per hourHigh capacity – up to 40 g of nickel per litreGentle on copper, brass, steel and silverEasy and safe to useLow odourReusable for long service lifeNo grinding or abrasive blasting requiredProfessional quality from Betzmann GalvanikFast, Controlled and Reliable Nickel RemovalNickel coatings often need to be removed before replating, restoration or repair work. Mechanical methods such as grinding or blasting are time-consuming and may damage valuable base materials.The Nickel Stripper selectively dissolves nickel coatings while leaving the substrate largely unaffected. This allows workpieces to be replated immediately after stripping and avoids the production of hazardous nickel dust associated with mechanical removal methods.Typical ApplicationsIdeal for:Electroplating workshopsJewellery manufacturingJewellery repairWatchmakingRestorationClassic car restorationPrecision engineeringModel makingTool makingMechanical engineeringIndustrial metal finishingLaboratoriesReworking defective electroplated partsSuitable MaterialsSuitable for use on:CopperBrassSteelSilverEffectively removes:Electroplated nickelElectroless nickel (Nickel-Phosphorus / EN)For unknown alloys, a preliminary compatibility test is always recommended.Easy ApplicationThoroughly clean and degrease the workpiece.Pour the Nickel Stripper into a suitable polypropylene (PP), borosilicate glass, ceramic or enamel container.Heat the solution to 50–65 °C for optimum stripping performance.Completely immerse the workpiece.Agitate the workpiece gently during the process.Rinse thoroughly with clean water after stripping.Replate or continue processing immediately.Gentle agitation improves stripping performance. Thick nickel coatings may require multiple stripping cycles.Technical DataProcess: Chemical, immersionPower supply required: NoOperating temperature: 50–65 °CStripping rate: Up to 50 µm/hourCapacity: Approximately 40 g nickel per litreReusableReady-to-use solutionWhy Choose Betzmann Galvanik Nickel Stripper?Compared with mechanical stripping or aggressive removal methods, the Betzmann Galvanik Nickel Stripper offers significant advantages:Gentle on the base materialUniform nickel removalFully controllable stripping processCost-effective operationLong bath lifeReusable solutionNo electrical equipment requiredProfessional results for hobbyists and industry alikeIt is the ideal solution for electroplating companies, jewellery manufacturers, restoration workshops and industrial surface finishing.Safety InformationAlways use the Nickel Stripper in accordance with applicable safety regulations.Wear protective glovesWear safety gogglesUse only in well-ventilated areasAvoid skin and eye contactKeep out of reach of childrenNickel-containing waste solutions must be disposed of in accordance with local environmental regulations. Always follow the Safety Data Sheet (SDS) and product label instructions.Quality from Betzmann GalvanikThe Nickel Remover / Nickel Stripper from Betzmann Galvanik has been developed for the professional, safe and efficient removal of nickel coatings. Its high stripping performance, ease of use and excellent material compatibility make it the perfect solution for electroplating, jewellery production, restoration and industrial metal finishing.

Large storage cup - Betzmann Galvanik - Real Gold    This stable cup with screw cap made of transparent PP holds approx. 375 ml.   Practical is the storage of the electrode with the cloth pad in the respective electrolyte. On request, you will receive the appropriate labelling for the material to be stored.  Colour varies, black or white lid!    Dimensions approx. 8 cm high, diameter 7.3 cm 

Aluminium Electrode Ø 6 mm (SW10012) Short Description The Aluminium Electrode Ø 6 mm is a robust, chemically resistant anode designed for electroplating applications where aluminium offers advantages. It is ideal for chrome, nickel and other plating processes that require reliable current distribution, minimal contamination and consistent performance. Product Description Made from high-quality aluminium, this electrode delivers excellent electrical conductivity and broad chemical resistance in many electrolytes. It provides a stable current supply that enhances process consistency and helps produce uniform, reproducible deposits. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating setups. Typical Applications Electroplating processes such as chrome and nickel plating Bath, pen and pad plating Surface cleaning, activation and pre-treatment Workshop, laboratory and manufacturing environments Key Benefits Strong electrical conductivity for stable electroplating Chemical resistance in a variety of electrolytes Low contamination of the plating bath Longer service life compared to less stable electrodes Versatile compatibility with standard Ø 6 mm holders Usage Instructions Preparation: Clean and degrease workpieces thoroughly before plating. Setup: Connect the electrode as the anode; the workpiece serves as the cathode. Plating: Operate the electrolyte according to process requirements. Maintenance: Clean the electrode regularly to ensure long-lasting performance. Conclusion The Aluminium Electrode Ø 6 mm offers a reliable and versatile anode solution for a range of electroplating applications. Its combination of good conductivity, chemical resistance, and ease of use makes it suitable for hobbyists, workshop professionals and industrial plating tasks alike.