Silver Electrolyte 30 g/L – Premium Silver Plating Solution for Tank, Pen & Brush PlatingProfessional Silver Electrolyte for Bright, Conductive and High-Quality Silver CoatingsThe Silver Electrolyte 30 g/L from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for depositing high-purity silver coatings on conductive metal surfaces. With a silver concentration of 30 grams per litre, this electrolyte provides fast deposition rates, brilliant finishes and outstanding electrical conductivity.The electrolyte is suitable for tank plating, pen plating and brush plating (swab plating), delivering professional results for both decorative and technical applications. Whether you are plating jewellery, electronic components, electrical contacts, cutlery or restoration projects, this silver plating solution produces uniform, highly adherent and durable silver deposits.Your Advantages at a Glance30 g of silver per litreReady-to-use professional electrolyteSuitable for tank plating, pen plating and brush platingBright, uniform silver depositsOutstanding electrical and thermal conductivityExcellent adhesionEven metal depositionSuitable for decorative and technical applicationsIdeal for hobbyists, workshops and industrial usersPremium quality from Betzmann GalvanikWhy Electroplate with Silver?Silver offers the highest electrical conductivity of all metals, combined with excellent thermal conductivity and an attractive bright white appearance. It is one of the most widely used precious metals in electroplating for both decorative and functional applications.Silver plating is commonly used for:Decorative finishesElectrical contactsPrinted circuit boards (PCBs)Connectors and terminalsJewelleryWatchesCutleryMusical instrumentsPrecision componentsRestoration workIn addition to its elegant appearance, a silver coating significantly improves conductivity while providing excellent wear resistance and protection against oxidation.Suitable Base MaterialsThe Silver Electrolyte is suitable for plating:CopperBrassBronzeNickelSteel (with appropriate pre-treatment)Stainless steel (after Nickel Strike activation)SilverCopper-plated componentsDepending on the substrate, we recommend using the appropriate activator or intermediate layer to achieve maximum adhesion.Recommended Plating StructureFor maximum durability and long-term colour stability, the following plating sequence is recommended:Base Material → Copper → Nickel → SilverThe nickel layer acts as a diffusion barrier, preventing copper migration into the silver coating and ensuring a bright, tarnish-resistant finish.Typical ApplicationsIdeal for:Jewellery manufacturingJewellery repairWatchmakingElectronicsPrinted circuit boards (PCBs)Electrical contactsConnectorsMusical instrumentsRestorationClassic carsModel makingLaboratoriesIndustrial electroplatingProfessional metal finishingApplicationBefore silver plating:Thoroughly clean and degrease the workpiece.Remove all oxide layers.Activate the surface according to the base material.During plating:For tank plating, immerse the workpiece completely in the electrolyte.For pen plating or brush plating, keep the electrode moving continuously across the surface to ensure uniform metal deposition.After plating, rinse the workpiece thoroughly with clean water and dry completely.Technical SpecificationsSilver concentration: 30 g/LOperating temperature: 15–30 °CpH value: Slightly acidic to neutralCurrent density: 0.5–3 A/dm²Tank plating voltage: Approx. 1.5–3.5 VPen & brush plating voltage: Approx. 3–7 VRecommended anodes: Platinum, graphite or silverCoating thickness: Approx. 1–5 µm (depending on plating time)Deposit purity: >99.9% silverThe above parameters are recommended values and may vary depending on workpiece geometry, electrode spacing and plating equipment.Safety InformationWear protective gloves and safety goggles.Avoid skin and eye contact.Use only in well-ventilated areas.Keep out of reach of children.Always follow the Safety Data Sheet (SDS).Quality from Betzmann GalvanikThe Silver Electrolyte 30 g/L from Betzmann Galvanik has been developed to meet the highest standards in modern electroplating. Its high silver concentration, excellent conductivity and easy handling make it ideal for decorative silver plating as well as demanding industrial applications. Combined with Betzmann Galvanik power supplies, electrodes and accessories, it delivers brilliant, durable and professional silver finishes every time.

Silver Electrode Ø 6 mm (BMG‑009) Short Description The Silver Electrode Ø 6 mm is a high‑purity silver anode (Ag 99.99 %) designed for electroplating applications. It provides a controlled supply of silver ions to the plating bath, enhances deposit quality and reduces silver consumption in bath, pen and pad plating processes.  Product Description Made from electrolytically refined, unalloyed fine silver with a diameter of 6 mm and length of approximately 100 mm, this electrode delivers exceptional electrical conductivity and consistent performance. Its high purity (Ag 99.99) supports stable and efficient plating. When used as a sacrificial anode, the silver dissolves into the plating solution to maintain silver ion concentration, helping to save 40 %–50 % on silver solution costs by reducing the need for frequent top‑up solutions.  Fine silver also has the highest electrical and thermal conductivity of all metals, promoting efficient current flow and stable electrochemical conditions. Typical Applications Silver plating of metal parts via bath, pen or pad methods Lowering contact resistance on conductive surfaces Improving solderability of components Research, electrochemistry and laboratory experiments As an ionization electrode in certain air or water treatment setups  Key Benefits High‑purity fine silver (Ag 99.99 %) for consistent results Excellent conductivity: supports stable current delivery Reduced silver consumption: more cost‑effective plating Universal use: compatible with multiple plating methods Reliable performance for repeated use  Usage Instructions Use with a suitable silver plating electrolyte depending on the method. Connect the silver electrode as the anode to the positive terminal of your power supply. The workpiece acts as the cathode (negative terminal). Adjust voltage and current according to electrolyte recommendations (often low volt range) for even deposits.  Conclusion The Silver Electrode Ø 6 mm is an essential accessory for producing high‑quality silver deposits in electroplating applications. Its high purity, conductivity and cost‑saving potential make it ideal for hobbyists, workshop users and professionals alike

Silver High-Speed Electrolyte BMG‑105.6 High-performance silver plating solution – 75 g of silver per liter for fast, high-quality coatings Short Description The Silver High-Speed Electrolyte BMG‑105.6 is a high-performance electroplating solution designed for the rapid deposition of high-quality silver layers. With a silver content of 75 g/L, this electrolyte enables a significantly higher deposition rate than standard silver baths, producing bright, reflective, and conductive silver coatings in less time. The layers are ideal for both decorative and functional applications. Applications This high-speed silver electrolyte is typically used for: Decorative silver plating, e.g., jewelry, accessories, and design objects Functional coatings with improved electrical and thermal conductivity High-throughput applications on large surfaces Tank, brush, and pen/peg plating, depending on equipment Multi-layer plating systems (e.g., copper → silver → gold) The higher silver concentration accelerates deposition while maintaining consistent quality. How High-Speed Silver Plating Works (Simple Explanation) Silver plating is an electrolytic process, where silver ions are reduced under direct current and deposited onto a prepared metal surface: Surface Preparation: Thoroughly clean and degrease the workpiece to remove oils and contaminants. Activation: Activate the surface chemically if needed for optimal adhesion. Electroplating: Apply direct current; silver ions migrate and form a bright silver layer on the surface. Finishing: Rinse and dry – the surface remains reflective and uniform. The high silver content allows fast and efficient deposition without compromising appearance or conductivity. Benefits of Silver High-Speed Electrolyte BMG‑105.6 High silver content (75 g/L) for faster deposition and higher productivity Bright, reflective silver surface Enhanced electrical and thermal conductivity Suitable for decorative and functional coatings Compatible with tank, brush, and pen/peg plating Robust and uniform layers even at high throughput Technical Parameters PropertyValue / RangeElectrolyte typeSilver High-Speed plating solutionSilver contentapprox. 75 g/LpHslightly acidic to neutral, optimized for high deposition ratesOperating temperature15–30 °CVoltage (tank plating)1.5–4.0 VVoltage (brush/pen plating)3–7 VCurrent density0.5–4 A/dm²Anode materialGraphite or pure silverTypical layer thickness2–10 µmSurface appearanceHigh-gloss, reflectiveLayer purity>99.9 % silverConductivityVery goodShelf life1–2 years Note: Values serve as practical guidelines; results may vary slightly depending on equipment, workpiece, and process conditions. Practical Application Tips Surface Preparation: Remove grease, oils, and contaminants by thorough cleaning and degreasing. Chemical activation may be performed to improve adhesion. High-Speed Silver Plating: Operate the electrolyte at recommended temperature, voltage, and current density. Ensure even agitation or movement for uniform layer formation. Mask areas if selective plating is needed. Post-treatment: Rinse with clean water and dry after plating. Light polishing can enhance gloss if desired. Safety Information Silver plating solutions contain chemical components and must be handled safely: Wear gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work only in well-ventilated areas Do not ingest; keep out of reach of children Dispose of waste according to local regulations Silver salts and electrolytes can be irritating; proper protection is essential. Conclusion The Silver High-Speed Electrolyte BMG‑105.6 is a powerful and efficient plating solution that produces bright, reflective, and conductive silver layers at high speed. Its high silver content and ease of use ensure fast throughput with excellent layer quality. Ideal for jewelry, technical components, or large-surface applications, this electrolyte delivers consistent, high-quality results for hobbyists, workshops, and professional plating facilities.

Silver Anti-Tarnish Protection – Nanotechnology Passivation for Long-Lasting Protection Effective protection for silver surfaces: This silver anti-tarnish solution is based on modern nanotechnology and reliably prevents tarnishing without affecting optical or electrical properties. Application is simple via immersion. A transparent, organic protective layer forms on the surface, preserving the appearance while maintaining gloss, color, and electrical conductivity. Key Benefits Nanotechnology-based anti-tarnish protection Preserves gloss, color, and electrical properties Easy immersion process Biologically harmless and skin-friendly Suitable for decorative and technical applications Applicable for rack, barrel, and reel-to-reel systems Reduces insertion and withdrawal forces due to lubricating effect Temperature resistant up to approx. 300 °C (short-term) Application Pre-treatment Thoroughly degrease and clean the parts Ensure surfaces are completely dry Treatment Immersion process Temperature: 20–25 °C Treatment time: 30–60 seconds Post-treatment Dry without rinsing Warm air drying at 60–90 °C Technical Data Base: aqueous system with organic inhibitor Delivery form: ready-to-use solution Shelf life: approx. 1 year Consumption: approx. 1 liter for ~3000 dm² pH value: no monitoring required Applications Protection of silver against sulfur compounds during storage Suitable for silver, copper, palladium, and thin gold layers Ideal for electrical contacts and connectors