Alkaline Copper BMG 093M – Precision, Adhesion & Professional Results The Alkaline Copper from Betzmann Galvanik is a high-performance, versatile electroplating electrolyte designed for demanding applications in bath plating, pen plating, and tampon plating. Engineered for maximum adhesion and uniform deposition, this electrolyte produces smooth, low-stress copper layers, making it ideal as both an intermediate layer and a decorative finish. Suitable for both beginners and professionals, it ensures consistent and reliable results across a wide range of applications. Key Benefits at a Glance Excellent adhesion on various metals Smooth, dense and uniform copper layers Perfect for complex geometries and fine details Suitable for: Bath electroplating Pen plating Tampon plating Beginner-friendly yet professional-grade Reduced internal stress for crack-free coatings Applications Jewelry manufacturing & finishing Repair and restoration Model making & precision engineering PCB and technical applications Decorative metal finishing Technical Parameters Electrolyte type: Alkaline Metal: Copper Application methods: Bath, pen, and tampon plating Working temperature: approx. 20–30 °C pH value: Alkaline (stabilized) Current density: Bath: approx. 0.5 – 2.5 A/dm² Pen/Tampon: adjustable depending on use Voltage: approx. 1–6 V Anode material: Copper (recommended) Application Guide (Beginner to Professional) 1. Surface Preparation (critical for adhesion) Thoroughly degrease the workpiece Activate / pickle depending on base material Rinse with distilled water Avoid touching the surface afterwards 2. Bath Electroplating (efficient & uniform) Fully immerse the workpiece in the electrolyte Apply DC current (follow recommended current density) Plate until desired thickness is achieved Use agitation for uniform results Ideal for larger parts and batch processing 3. Pen Plating (precise & flexible) Apply electrolyte via felt or sponge tip Move the plating pen evenly across the surface Start with low voltage and increase gradually  Perfect for small areas, repairs and detail work  4. Tampon Plating (controlled & mobile) Soak tampon with electrolyte Apply directly to the surface Maintain even pressure and movement  Best for selective plating and hard-to-reach areas  Pro Tips for Best Results Lower current density = finer, smoother layers Higher current density = faster build-up (risk of roughness) Always work with clean solutions and tools Rinse between steps for better quality Maintain stable temperature Conclusion The Alkaline Copper BMG 093M is the perfect choice for anyone seeking reliable, high-quality and versatile copper plating results. Whether you're a beginner or a professional, this electrolyte delivers excellent adhesion, smooth finishes, and consistent performance.

Create Electrically Conductive Surfaces Quickly and Easily Our Silver Conductive Spray is a premium-quality conductive coating formulated with 16 g of real silver to create highly conductive surfaces on non-conductive materials. It is the ideal solution for electroplating preparation, electronic applications, EMI/RFI shielding, prototype development, and industrial manufacturing. The convenient aerosol format provides an even, professional-quality coating, making it perfect for both flat and complex-shaped components. Key Features ✔ High electrical conductivity ✔ Formulated with 16 g of real silver ✔ Easy, uniform spray application ✔ Excellent adhesion on properly prepared surfaces ✔ Fast drying ✔ Ideal primer for electroplating ✔ Suitable for decorative and technical applications ✔ Professional industrial quality Ideal Applications Perfect for: Electroplating preparation Plastic metallization Making non-conductive surfaces electrically conductive Glass metallization Ceramic coating Conductive coating for wood Electronics manufacturing PCB prototyping Electrical contact repair Jewelry manufacturing and restoration Model making EMI shielding RFI shielding ESD protection Decorative metal finishing Preservation and metallization of flowers and natural materials Laboratory and research applications Perfect Base for Electroplating After drying, the conductive coating forms an excellent foundation for electroplating. For optimum plating quality, apply a bright copper electrolyte or acid copper electrolyte before continuing with nickel, silver, gold, rhodium, chrome, or other decorative and functional metal coatings. This process improves adhesion, coating thickness, corrosion resistance, and the final surface finish. Easy Application Clean and degrease the surface thoroughly. Apply a suitable plastic primer if required. Shake the aerosol can vigorously before use. Apply several thin coats using a cross-spray pattern. Allow 5–15 minutes between coats. Let the coating dry completely before electroplating. Technical Specifications Product Type: Silver Conductive Spray Volume: 150 ml Silver Content: 16 g of real silver Application Method: Aerosol spray Purpose: Creating electrically conductive surfaces Suitable for: Brush plating, pen plating, and bath plating Color: Silver Drying Time: Approximately 5–15 minutes between coats Quality: Professional industrial grade Why Choose Silver Conductive Spray? Silver has the highest electrical conductivity of all metals, making it the preferred material for conductive coatings and electroplating preparation. The high silver content ensures excellent conductivity, while the aerosol application provides fast, even coverage on large, detailed, or complex-shaped parts. Whether you are preparing components for electroplating, repairing electrical circuits, or creating EMI shielding, this conductive spray delivers reliable, professional-quality performance. Package Contents 1 × Silver Conductive Spray (150 ml) Safety Information Signal Word: Danger Extremely flammable aerosol. Pressurized container: may burst if heated. Use only in well-ventilated areas. Wear suitable protective gloves and eye protection. Keep away from heat, sparks, open flames, and hot surfaces. Do not spray onto open flames or other ignition sources. Keep out of reach of children. Always read the Safety Data Sheet (SDS) before use.

Turn Non-Conductive Surfaces into Conductive Metal Finishes Our Copper Conductive Paint 50 ml or 200 ml is a professional-grade conductive coating designed to transform non-conductive materials into electrically conductive surfaces. It provides the ideal foundation for electroplating while also creating an attractive metallic copper finish for decorative applications. Perfect for 3D printed parts, plastics, resin, wood, ceramics, glass, plaster, and natural materials, this conductive paint allows virtually any object to be prepared for further metal plating. Key Features ✔ Creates electrically conductive surfaces ✔ Ideal primer for electroplating ✔ Excellent adhesion on most non-conductive materials ✔ Bright metallic copper finish ✔ Suitable for brush, sponge, or airbrush application ✔ Easy to apply ✔ Fast drying ✔ Professional quality for industrial and hobby applications Perfect For Electroplating preparation Plastic metallization 3D printed parts PLA and ABS components Resin models Glass metallization Ceramic coating Wood metallization Plaster coating Jewelry manufacturing Model making Restoration projects Decorative metal finishes Art and sculpture Prototype development DIY electroplating Ideal Base for Electroplating After drying, the copper conductive coating forms an electrically conductive surface suitable for electroplating. For maximum conductivity and excellent plating performance, we recommend activating the coated object in an acid copper plating bath. Once the copper layer has been built up, additional metal finishes such as: Nickel Silver Gold Rhodium Chrome can be applied. For premium decorative coatings, a palladium strike layer is recommended before precious metal plating. Easy Application Clean, dry, and degrease the surface thoroughly. Stir or shake the paint well before use. Apply evenly using a brush, sponge, or airbrush. Allow the coating to dry completely. Activate the surface in an acid copper electroplating bath. Continue with additional electroplating processes if desired. Applications Ideal for: Electroplating Jewelry manufacturing Model making Art and sculpture Restoration Electronics prototyping Decorative metal finishing Industrial applications Research and laboratory work Technical Specifications Product Type: Copper Conductive Paint Volume: 50 ml or 200 ml Color: Copper Application: Conductive metallizing coating Application Methods: Brush, sponge, airbrush Suitable Materials: Plastic, PLA, ABS, resin, glass, ceramic, wood, plaster, natural materials Further Processing: Suitable for electroplating Quality: Professional grade Why Choose Copper Conductive Paint? Copper offers excellent electrical conductivity and is the preferred base layer for electroplating applications. This conductive coating creates a reliable conductive surface that enables high-quality plating with nickel, silver, gold, rhodium, chrome, and other metals. Whether you're producing professional prototypes, metallizing 3D prints, restoring artwork, or creating decorative metal finishes, this copper conductive paint delivers reliable, consistent, and professional results. Package Contents 1 × Copper Conductive Paint (50 ml or 200 ml)

Copper Plate Electrode (SW10051M) Short Description The Copper Plate Electrode is a large‑area sacrificial anode made from high‑purity copper (≥ 99.9 %) designed for electroplating. It provides a consistent supply of copper ions to the electrolyte, promoting stable baths, uniform deposits and improved conductivity in copper plating applications.  Product Description This plate is manufactured from pure copper, which dissolves evenly into the electrolyte to maintain a consistent metal ion concentration. The flat, broad surface makes it ideal for covering larger workpieces or for use in plating tanks where even current distribution is critical to achieving high‑quality copper coatings. Copper anodes like this plate are typically used in bath electroplating settings and can also serve as a foundation layer before other coatings such as nickel or chrome are applied. Typical Applications Electroplating of copper on metal substrates Bath plating for decorative or functional copper layers Undercoat / intermediate layer before nickel or chrome plating Workshop, lab and production electroplating Applications involving larger workpieces requiring extensive coverage  Key BenefitsCopper Sacrificial Anode Sheet Plate anode made of pure copper for electroplating Sacrificial anode for electrolytic copper plating Copper anode sheet for acidic copper electrolytes, copper (Cu) min. 99.9% (Cu-DHP, CW024A, 2.0090, SF-Cu) Electrolytically deposited copper is used to improve conductivity due to its excellent electrical properties, as well as a barrier layer prior to nickel and chrome plating of steel surfaces to enhance corrosion resistance, and for pre-copper plating of zinc die-castings Sheetthickness 0.7 mm Available in sizes S (25 x 150 mm), M (50 x 80 mm), L (100 x 150 mm), and XL (170 x 200 mm) Custom cuts and sheet thicknesses of 1.0 and 2.0 mm also available upon request (min. 1 m²)Size: L - 100 x 150 mmM - 50 x 80 mmS - 25 x 150 mmXL - 170 x 200 mmMaterial: Copper Thickness: 0.7 mm, 1 mm, 2 mm Purity: 99.9  High copper purity (≥ 99.9 %): clean ion release for consistent baths Broad plate design: promotes uniform current distribution Improved deposit quality: even, durable copper coatings Flexible use: suitable for a range of plating setups Easy integration: fits naturally into standard bath electroplating processes  Usage Instructions Preparation: Thoroughly clean and degrease all workpieces prior to plating. Placement: Position the copper plate electrode as the anode (positive terminal) in the electrolyte. Connect: Attach the electrode to the positive output of your power supply and the workpiece to the negative (cathode). Plating: Adjust voltage and current according to the specific copper electrolyte used. Maintenance: Periodically clean off any buildup to maintain performance and longevity. Conclusion The Copper Plate Electrode is a reliable, versatile accessory for copper electroplating, offering consistent performance and uniform deposition thanks to its large active surface and high material purity — suitable for hobbyists, workshop use and professional electroplating environments alike.

Copper Electrode Ø 6 mm (BMG-011) Short Description The Copper Electrode Ø 6 mm is a high-purity copper anode (99.9 %) designed for efficient electroplating of copper. It delivers consistent copper ion supply in the electrolyte, enabling fast, even and high-quality copper plating — suitable for bath, pen and pad plating applications. Product Description Made from pure copper (99.9 %), this electrode offers excellent electrical conductivity and controlled copper release into the plating bath. This helps maintain a stable metal content in the electrolyte, improving deposit quality and process reliability while reducing waste and costs. Typical Applications Copper electroplating in various electrochemical setups Bath, pen and pad plating techniques Decorative and functional copper coatings Foundation layers for corrosion protection before further plating Use in workshops, labs and production environments Key Benefits Superior conductivity: ensures stable current flow during plating.  High-purity copper: reduces bath contamination and supports consistent results.  Faster copper ion exchange: improves plating efficiency and finish quality.  Cost savings: can reduce plating solution expenses by up to 40 %–50 % by maintaining bath metal content.  Easy handling: fits standard electrode holders and plating fixtures. Usage Tips Preparation: Thoroughly clean and degrease workpieces before plating. Plating Setup: Connect the electrode to the positive terminal while the workpiece serves as the cathode. Maintenance: Clean the electrode periodically to maintain performance. Compatibility: Best used with copper plating electrolytes in both alkaline and acidic baths. Conclusion The Copper Electrode Ø 6 mm is an essential component for efficient and reliable copper electroplating, offering a balanced combination of performance, cost-effectiveness and ease of use for hobbyists, technicians and professional plaquers alike.

Turn Non-Conductive Surfaces into Electrically Conductive Components The Silver Conductive Spray 150 ml is a premium conductive coating formulated with 13.8 g of real silver to create highly conductive surfaces on non-conductive materials. It is specifically designed for electroplating preparation, electronics manufacturing, EMI/RFI shielding, and technical surface finishing. Suitable for plastics, wood, glass, ceramics, resin, and 3D-printed parts, this conductive spray provides a uniform conductive layer that can be further electroplated using both brush plating and bath plating processes. The convenient aerosol format ensures fast, even application on flat, curved, and complex-shaped components. Key Features ✔ Contains 13.8 g of real silver ✔ High electrical conductivity ✔ Creates conductive surfaces on non-conductive materials ✔ Suitable for brush plating and bath plating ✔ Excellent adhesion on properly prepared surfaces ✔ Fast and even aerosol application ✔ Quick drying ✔ Professional quality for industrial and laboratory use Ideal Applications Perfect for: Electroplating preparation Plastic metallization 3D printed parts PLA, PETG, ABS and resin components Glass metallization Ceramic coating Conductive coating for wood Jewelry manufacturing Model making Restoration projects Electronics manufacturing PCB prototyping EMI shielding RFI shielding ESD protection Electrical contact repair Decorative metal finishing Research and laboratory applications Ideal Primer for Electroplating After drying, the coating forms a highly conductive surface suitable for both brush plating and bath plating. For optimum conductivity and brilliant plating results, we recommend applying an acid bright copper electrolyte after the conductive coating has dried completely. The copper layer can then be polished before applying additional coatings such as: Nickel Silver Gold Rhodium Chrome This process provides excellent adhesion, superior corrosion resistance, and a high-gloss finish. Easy Application Clean, dry, and thoroughly degrease the surface. Shake the aerosol can vigorously for at least 2 minutes. Apply several thin coats using a cross-spray pattern. Allow each coat to flash off before applying the next. Let the coating dry completely. For electroplating, activate the coating with an acid bright copper electrolyte before applying additional metal layers. Applications Ideal for: Electroplating Plastic metallization Surface finishing Jewelry production Model making Restoration Electronics Prototype development EMI/RFI shielding Industrial manufacturing Laboratory and research DIY projects Technical Specifications Product Type: Silver Conductive Spray Volume: 150 ml Silver Content: 13.8 g of real silver Color: Silver Application Method: Aerosol spray Purpose: Creating electrically conductive surfaces Suitable for: Brush plating and bath plating Suitable Materials: Plastic, PLA, PETG, ABS, resin, wood, glass, ceramics, plaster, and natural materials Quality: Professional grade Why Choose Silver Conductive Spray? Silver has the highest electrical conductivity of all metals, making it the preferred choice for conductive coatings and electroplating preparation. The high silver content provides excellent conductivity and reliable performance, while the aerosol spray ensures fast, uniform coverage even on complex geometries. Whether you're preparing 3D prints for electroplating, metallizing plastic components, producing EMI shielding, or manufacturing precision electronic parts, this professional conductive spray delivers consistent, high-quality results. Package Contents 1 × Silver Conductive Spray Volume: 150 ml Silver Content: 13.8 g of real silver