Selber verchromen: mit dem richtigen Zubehör zum perfekten Ergebnis

Aluminum Electrode for brighter chromium plating   Our new type of aluminum electrode separates the chrome III brighter when plating and prevents the yellow tint that usually occurs with nickel electrodes. Dimensions: 6mm diameter, length approx. 10 cm          

Chrome electrolyte - chrome plating with Betzmann Galvanik   Chrome plating by yourself with high-quality chrome electrolyte from Betzmann Galvanik  A layer of chromium protects a wide variety of components from oxidation and corrosion. In addition, the workpiece is given a visually appealing appearance. Our electrolyte is based on chrome(III). While chromium(VI) was originally used in the industrial process, chromium(III) electrolytes are increasingly being used because they have a significantly lower impact on man and nature. This electrolyte contains all our know-how - we were able to make it significantly brighter and more efficient. Current densities up to 20A/dm² can be achieved. Usually chrome is deposited in the layer system copper - nickel - chrome. The intermediate layer of nickel provides additional protection against corrosion, as chrome layers show microcracks. T   Of course, the chrome electrolyte is suitable for all processes such as bath electroplating and pen plating (or pad plating). When chromium plating, always wear the necessary protective equipment such as safety goggles, gloves and protective clothing and only work in a well-ventilated room.   Parameters (these may vary, please test): Bath electroplating: 1.5-6V (approx. 3V recommended at 10cm distance) pin plating: 3-7V (approx. 4-5V recommended) Current density: 4-24A/dm² (up to 50A/dm² with bath movement) Working temperature 20-50°C (25°C recommended) deposition rate: 0.06µm/min at 10A/dm²   The most important advantages at a glance:  is equally suitable for bath electroplating and pen plating / pad plating high adhesive strength and abrasion resistance high hardness up to 1200 HV extremely large current density range appealing optics Color of the chrome layer is very similar to the result of hexavalent chrome baths heating of the electrolyte is not necessary (temperature range 15-50°C, preferably 15-30°C) high reflection and beautiful gloss higher permissible metal impurities than with other processes, thus easier to use    To achieve a perfect result with the chrome electrolyte, the appropriate anodes are required for the galvanic process used. Anodes made of aluminum, platinized titanium, platinum or iridium are recommended. For pen plating, graphite, nickel or stainless steel anodes can be used if necessary. With nickel or stainless steel anodes, however, it is important to ensure that the pad is washed out well in between so that the metal contamination that arises does not contaminate the electrolyte and the chromium layer.   Aluminium anodes have proven to be particularly advantageous, they are particularly cost-effective and the electrolyte retains its excellent color. If you do not have any, we recommend that you order them directly from us.   Identification of the mixture: Chrome Electrolyte (contains chromium hydroxide sulfate, boric acid, ammonium chloride, ammonium formate) Signal word: Caution H-phrases: H317: May cause an allergic skin reaction. P phrases: P261: Avoid inhalation of aerosol. P280: Wear protective gloves / eye protection. P302 + P352: IF ON SKIN: Wash with plenty of water. P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. P101: If medical advice is needed, have container or label at hand. P102: Keep out of the reach of children.             

BMG-25A - Electroplating line - complete basic equipment with electrolyte set for chrome       With this complete set you achieve absolutely perfect results!   No matter what size, whether 10 meters of railing or a 28 inch rim, this machine can coat any surface.   With 100 ml electrolyte you usually manage 1m2, so it is quite productive!   With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chromed surfaces or chromed plastic (conductive layer) with all metals available on the market. e.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words everything we have on stock according to our price list.     Scope of delivery: 1x Power Rectifier, galvanic unit depending on availability with 25 A digital or analog, adjustable 2.5 to 15 Volt, power cord,            1x cable PLUS  1x cable MINUS with clamp 1x handle 3x stainless steel electrodes thick 6mm 1x Aluminium Electrode for Chromplating 6mm  6x sleeves   6x cups with lid, scaled   250 ml chrome  250 ml Nikel   250 ml Copper alkali   250 ml chrome remover for dechroming  250 ml Electrocleaner for degreasing  250 ml activator     Manual in German or English, training films, guides via PDF / E-MAIL  Free personal technical support, 12 months warranty, free personal training and support, unlimited and free advice from our team   Immediately ready for gilding! Can be supplemented with chrome - black rhodium - silver and much more.    High Power 25 or 40 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -    Technical data    Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 Kg.    

BMG- 25 amp galvanic unit - Betzmann Galvanik - Real Gold  With this device you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market.   There is no size limit from 25 A! No matter if coins, screws or 20 meters of stainless steel pipes in one piece!    - Real Gold (999-fine gold) - Rose gold, white gold, antique gold - Silver            - Nickel - alkaline or acid copper - Chrome - Black Chrome - Rhodium - black rhodium - Palladium - Platinum - zinc, tin - Bronze  So everything we have according to the price list     Scope of delivery / technical details: Basic unit Power supply unit 2.7 - 15 Volt adjustable, depending on availability 25 Ampere analog or digital display, depending on availability, power plug  High Power 25 Amp switch mode power supply with two analog or digital measuring instruments for output voltage and output current -     Technical data  Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 Kg.        

BMG-25 A Electroplating system - complete set complete basic equipment with electrolyte set and chrome      Please note: Even if we are talking about an entry-level model, you will achieve absolutely perfect results with this complete set!    No matter what size, whether 1 coin, screw, 10 meter railing or a 28 inch rim, this machine can coat any surface.      With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. e.g. 24 carat real gold (999) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - everything we have according to our price list    Scope of delivery:  1x electroplating unit with 25 Ampere, adjustable 2.5 to 15 Volt, power cable, depending on availability analogue or digital (does not matter for the application)  1x cable PLUS (blue,green,yellow,red)  1x cable MINUS with clamp  1x handle  3x stainless steel electrodes thick 6mm  1x aluminium electrode for chrome plating 6mm  6x sleeves   6x cups with lid  500 ml chrome  500 ml nickel  500 ml chrome remover for dechroming  500 ml Electrocleaner for degreasing  500 ml activator for nickel layer    Manual in German or English, training films, guides by email as pdf Free personal technical support, 12 months warranty, free personal training  and support, unlimited and free advice from our team  Immediately ready for chrome plating!      High Power 25 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -    Technical data    Operating voltage  230 Volt-AC/ 50Hz  Output voltage  3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side  Output current  25 amps constant  25 amperes short-term  Ripple & Noise  <50mV  load regulation  <200mV  line regulation  <50mV  Displays & movements  Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green  DC connection sockets  screwable pole terminals  Cooling  Fan  Security  Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts  Extras  dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability  Dimensions(WxHxD)  220x110x300 mm  Weight  3.5 kg        

Flat anode - aluminum anode for bath electroplating - for brighter chrome plating. Our new type of aluminum electrode deposits the chromium III brighter during plating and prevents the yellow tint that usually occurs with nickel electrodes.   Dimensions: 100 x 50 x 2 mm