Zinc Anode - 100x80x1 mm

Thick Multi-Layer Anode Pad – Maximum Durability for Demanding Electroplating The thick multi-layer anode pad is a highly durable and robust tampon (anode sleeve) designed for professional use in pen plating and brush (tampon) plating applications. Its reinforced multi-layer construction provides significantly longer service life compared to standard pads while ensuring consistent and uniform electrolyte transfer during the plating process. This makes it the ideal solution for demanding applications, rough surfaces, and intensive use conditions. Key Benefits Multi-layer construction for maximum durability Ideal for rough, uneven, or structured surfaces Significantly reduced wear compared to soft pads Uniform electrolyte distribution for consistent coatings Compatible with a wide range of plating solutions Cost-efficient due to extended lifespan Applications Pen plating (localized electroplating) Brush / tampon plating Repair and touch-up work Technical and functional coatings Processing of rough or heavily used surfaces This anode pad is the preferred choice when standard pads wear out quickly or fail to provide consistent results. Technical Specifications Design: thick, multi-layer stitched construction Structure: reinforced fabric layers for high stability Absorption: high electrolyte retention capacity Use: universal for electroplating applications Scope of delivery: 1 piece Compatibility Suitable for anode rods up to approx. 6 mm diameter Expandable up to approx. 8 mm if adjusted Dual insertion openings for extended usability Compatible with: Graphite anodes Platinum anodes Standard plating pens Process Advantages Even electrolyte and current distribution Reduced streaking and uneven coatings Better control on difficult surfaces Longer operating time → fewer replacements Increased efficiency in demanding applications Function in the Plating Process The anode pad acts as an electrolyte carrier and contact medium between the anode and the workpiece. It directly affects: Coating uniformity Surface quality Process stability A high-quality multi-layer pad ensures consistent, professional results even under heavy use. Application Note Pre-soak thoroughly with electrolyte before use to ensure conductivity Inspect regularly and replace when worn Conclusion – The Professional Choice for Heavy-Duty Applications The thick multi-layer anode pad is the ideal solution for professionals working under demanding electroplating conditions. It delivers: Maximum durability Reliable coating quality Improved process efficiency A small component with a major impact on plating performance and consistency.

Nickel Electrode Ø 6 mm (BMG-012) Short Description The Nickel Electrode Ø 6 mm is a high-quality anode made from nearly pure nickel, engineered for electroplating applications where controlled nickel ion release is essential. It delivers consistent, durable nickel deposits and is ideal for bath, pen and pad plating processes. Product Description Constructed from robust, corrosion-resistant nickel, this electrode offers excellent conductivity and uniform dissolution in the electrolyte. Using a nickel electrode helps maintain a stable nickel concentration in the bath, resulting in uniform deposits, enhanced layer properties and repeatable results. With a diameter of 6 mm and a length of approximately 95 mm, it fits standard electrode holders and plating setups. Typical Applications Nickel electroplating in various plating systems Bath, pen and pad plating techniques Corrosion protection layers and functional intermediate coatings Pre-treatment for subsequent precious metal plating Use in workshop, laboratory and production processes Key Benefits High chemical resistance: dissolves smoothly in electrolyte Stable current supply: supports reproducible plating outcomes Improved layer quality: even distribution and strong adhesion Long service life: durable material reduces frequent replacement Easy to use: fits common Ø 6 mm electrode holders Usage Instructions Preparation: Clean and degrease workpieces before plating. Setup: Install the nickel electrode as the anode, connect the workpiece as the cathode. Operation: Plate within recommended voltage and temperature ranges. Maintenance: Periodic cleaning extends electrode life and ensures consistent performance. Conclusion The Nickel Electrode Ø 6 mm is an essential component for efficient and reliable nickel electroplating, offering consistent performance for hobbyists, technicians and professional platers alike.

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Professional Chrome Plating Made Easy Achieve high-gloss, durable chrome coatings with this premium Chrome Electrolyte. Designed for professional plating applications, this solution is ideal for workshops, industrial use, and experienced users requiring reliable chrome finishing. Its advanced Chromium(III)-based formula offers a safer and more environmentally friendly alternative to traditional Chromium(VI) plating systems while maintaining excellent performance. Brilliant Shine & Durable Coatings This chrome electrolyte provides: mirror-like chrome finish uniform coating deposition excellent adhesion high abrasion resistance hardness up to 1200 HV Perfect for decorative and technical chrome plating. Suitable for Multiple Plating Methods Compatible with: bath plating brush plating / pen plating decorative surface finishing technical metal coating Wide operating range ensures flexibility across many applications. No Heating Required Efficient room-temperature operation: operating temperature: 20–45 °C no external heating required lower energy consumption simplified handling Ideal for efficient and cost-effective plating processes. Technical Specifications Content: 1000 ml Current Density: 5–24 A/dm² (up to 50 A/dm² with agitation) Bath Voltage: approx. 2 / 3.2 / 5.6 V Brush Plating Voltage: approx. 3–7 V (recommended 4–5 V) pH Value: 4–5 Temperature Range: 20–45 °C Immersion Time: 3–15 minutes Deposition Rate: approx. 0.06 µm/min Typical Layer Thickness: 0.2–0.5 µm Recommended Layer Structure For best corrosion resistance and adhesion: Copper → Nickel → Chrome Benefits: improved corrosion protection enhanced durability premium visual finish Compatible Anodes Recommended: aluminum anodes platinum-coated titanium platinum / iridium Alternative options for brush plating: graphite stainless steel nickel  Product Details Formula: Chromium(III)-based electrolyte Application: Chrome plating / electroplating Why Choose This Product? ✔ Professional plating quality ✔ No heating required ✔ Chromium(III) formula ✔ Brilliant chrome finish ✔ Suitable for bath & brush plating