Connection cable MINUS with 2 banana plugs and a crocodile clip:   Color black  Length 1.50 meters For connection directly to the device incl. a crocodile clip.   4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Gold-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

Stainless Steel Electrode Ø 4 mm – Precision Electrode for Fine Electroplating ApplicationsSlim Stainless Steel Electrode for Activating, Degreasing, Dechroming and Chromium PlatingThe Stainless Steel Electrode Ø 4 mm has been specially designed for precision work in pen plating, brush (tampon) plating and tank plating. Its slim diameter makes it ideal for small components, delicate parts and hard-to-reach areas.Manufactured from high-quality, corrosion-resistant stainless steel, it provides reliable current transfer while offering excellent chemical resistance and a long service life.Your AdvantagesSlim precision electrode with 4 mm diameterMade from high-quality corrosion-resistant stainless steelPerfect for delicate and detailed workIdeal for small components and confined areasExcellent for electrolytic degreasing and surface activationSuitable for dechroming and chromium platingCompatible with tank plating, pen plating and brush platingHigh mechanical strengthLong service lifeProfessional quality from Betzmann GalvanikWhy Use a Stainless Steel Electrode?Stainless steel electrodes are primarily used for pretreatment and cleaning processes. They provide reliable electrical conductivity and excellent resistance to many electroplating solutions.The 4 mm diameter offers superior precision when working on intricate parts and allows accurate treatment of small surfaces.Ideal for:Electrolytic degreasingSurface activationDechromingChromium platingPretreatment before electroplatingTypical ApplicationsPerfect for:JewelleryWatchesPrecision engineeringModel makingElectronicsRestorationSurface activationElectrolytic degreasingDechromingChromium platingTank platingPen platingBrush (tampon) platingMaterial PropertiesManufactured from high-quality stainless steel, the electrode offers:Excellent corrosion resistanceGood electrical conductivityHigh mechanical strengthLow wearLong service lifeApplication InstructionsBefore use:Thoroughly clean and degrease the workpieceUse a suitable electrolyteSet the recommended voltage and current according to the electrolyte specificationsImportant Note:For precious metal plating such as gold, silver, palladium or platinum, we recommend using a graphite or platinum electrode, as these do not contaminate the electrolyte with metal ions. Stainless steel electrodes are primarily intended for activation, cleaning, dechroming and chromium plating processes.Technical SpecificationsMaterial: Corrosion-resistant stainless steelDiameter: 4 mmSuitable for standard electrode holdersDesigned for precision electroplating applicationsPackage Contents1 × Stainless Steel Electrode Ø 4 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional electroplating accessories. The Stainless Steel Electrode Ø 4 mm is the perfect choice for precise activation, degreasing, dechroming and chromium plating of small components and delicate workpieces.

Curved Platinum Electrode (BMG-034-2) Short Description The Curved Platinum Electrode is a premium, shaped electrode with a platinized surface specifically designed for electroplating applications on convex and concave surfaces. Its curved profile delivers larger contact area, improved current distribution and faster, more even plating on contoured workpieces. Product Description This electrode features a titanium base with a fine platinum coating, offering excellent chemical inertness, high resistance to corrosion in many plating baths, and minimal contamination — ideal for brush or pen plating with precious metals such as gold, palladium and rhodium. Its curved geometry increases the active contact area against curved objects, ensuring that the plating current is distributed more uniformly and consistently across complex shapes.  Platinized titanium electrodes are widely regarded as superior to stainless steel or graphite ones because they produce cleaner, high-quality coatings, have excellent longevity and are compatible with most plating solutions, provided highly chloridic or fluoridic electrolytes are avoided.  Typical Applications Electroplating of curved metal objects (e.g., rings, reflectors, concave components) Gold, silver and precious metal finishing on contoured surfaces Repairs and detail plating on curved industrial or decorative parts Use in hobby, workshop, lab and production electroplating environments Key Benefits Curved profile: fits concave/convex shapes for improved contact Large active area: better current distribution and uniform plating Platinum coating: chemically inert and ideal for high-quality finishes Long service life: durable electrode performance with repeated use Versatile: suitable for various precious and specialty metal electrolytes Usage Instructions Preparation: Clean and degrease the workpiece; activate surface if required. Placement: Align the electrode so that it maximally contacts the curved surfaces. Plating: Set appropriate voltage and current according to the plating solution. Operation: Move the electrode evenly over the surface, leveraging the curved design for consistent contact. Maintenance: After plating, gently clean the electrode to remove residual deposits — avoid abrasive materials to preserve the platinum layer. Conclusion The Curved Platinum Electrode is a professional-grade solution for electroplating on curved and complex shapes, delivering uniform, high-quality results thanks to its increased contact area and platinum-enhanced surface. It is ideal for precise finishing tasks in hobbyist, workshop and commercial plating applications.

Connecting cable PLUS with banana plug:     Color RED  Length 1,50 meter For connection directly to the device      Color RED Length 1.50 meters For connection directly to the device incl. a stainless steel crocodile clip.     4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Nickel-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

Galvanic Power Supply 25 A (BMG-25A) Adjustable Power Unit for Electroplating and Laboratory Applications Short Description The Galvanic Power Supply 25 A (BMG-25A) is a powerful, electronically regulated power unit designed for electroplating, laboratory experiments and precision coating processes. With a continuous output up to 25 Amps and fine voltage regulation, this supply provides maximum control over electrochemical applications — suitable for hobbyists, workshops, educational labs and professional usage. It combines high performance, precision and ease of use for all processes requiring stable and adjustable DC power. Applications This power supply is ideal for: Electroplating processes (e.g., copper, nickel, gold, palladium) Laboratory experiments in electrochemistry Precise control of current and voltage in electrolytic operations Brush, pen and tank plating Educational, workshop and R&D environments Key Features & Benefits High Current Capacity – up to 25 A Allows larger or heavier parts to be plated without current drop. Adjustable Voltage and Current Fine control for precise layer thickness and reproducible results. Stable Performance for Extended Operation Reliable voltage and current stability Reduces fluctuations during plating for uniform coatings Easy to Operate Clear current and voltage indicators Simple control knobs — no software needed Versatile Use Great not just for plating, but also for: Electrolysis experiments Electrochemical testing Prototyping and DIY projects Technical Specifications (Guideline) Technische DatenBetriebsspannung230 Volt-AC/ 50HzAusgangsspannung3-15 Volt DC regelbar oder 13,8 Volt DC Festspannung durch Festspannungsschalter auf der UnterseiteAusgangsstrom25 A konstant28 A kurzzeitigRestwelligkeit & Rauschen<50mVLoad Regulation<200mVLine Regulation<50mVAnzeigen & Messwerke3 stelliges LED Digital Meter für Spannung und Strom, Zustands Bi-colour LED rot ( Störung ) und grünDC Anschlussbuchsenschraubbare PolklemmenKühlungVentilatorSicherheitSchutz Überlastung, Überhitzung, Kurzschluss- und verpolungssicher, Ausgangsspannungsschutz bei 16,5 VoltExtrasdunkelgraues Gehäuse aus Metall mit Gummistandfüßen, hohe Effizienz > 78% durch PFC (Dynamic Power Factor Correction) >0.95 maximiert den benötigten Strom, Hohe RFI StabilitätAbmessungen(BxHxT)220x110x220 mmGewicht2,7 Kg.Achtung: Nicht geeignet als Ladegerät Use Cases Gold Plating Accurate current control enables smooth, consistent gold deposition. Copper or Nickel Plating High current supports larger parts and thicker layers. Brush & Pen Plating Fine current regulation for localized or small surface work. Lab Experiments Stable output ideal for electrochemical studies and demonstrations. Safety Information Only use in dry, stable installations Do not operate in wet environments Wear protective gloves and eyewear Avoid direct contact with live electrical parts Disconnect before maintenance or cleaning Conclusion The Galvanic Power Supply 25 A is a reliable and precise DC source tailored for electroplating and laboratory use. Its combination of high current capacity, adjustable regulation and stable performance makes it a great choice for hobbyists, professionals, and anyone wanting controlled, repeatable results in electrochemical processes.

25A Electroplating Power Supply – The Perfect Balance Between Performance and Control The 25A electroplating power supply (analog laboratory unit) is the ideal solution for users who need reliable power, precise control, and versatile application options. It offers the perfect balance between entry-level usability and professional performance, making it suitable for both beginners and advanced users. This is the most practical and widely used power class in electroplating. 25 Amps – The Optimal Power Range With up to 25A continuous output (approx. 28A peak), this unit provides: stable plating conditions uniform coating thickness reliable performance even on larger surfaces Perfect for workshops, small production, and professional applications. Precision Control for Perfect Results Voltage range: 3 – 15 V adjustable Optional: 13.8 V fixed output mode Analog display for voltage and current This allows precise control over: coating thickness adhesion quality surface finish A stable power supply is essential for consistent, high-quality plating results. No Size Limitation With this power supply, you can plate: small parts (jewelry, screws) large components (pipes, structures, panels) One system for all sizes and applications. Compatible Plating Methods Pen Plating – precise localized repairs Brush / Tampon Plating – flexible surface coating Bath Plating – uniform production plating Suitable for hobby, professional, and industrial use. Compatible Plating Materials Supports a wide range of electroplating electrolytes: Gold (24K to 9K, white gold, rose gold) Silver Nickel Copper (acid & alkaline systems) Chrome & black chrome Rhodium & black rhodium Palladium, platinum, zinc, tin Fully compatible with modern electroplating systems. Technical Highlights Output current: 25A continuous / ~28A peak Voltage: 3 – 15 V adjustable Power: approx. 375 W Very low ripple (<50 mV) → clean plating results Analog meters for voltage and current Fan-cooled system Robust metal housing Weight: approx. 2.7 kg Safety & Reliability Overload protection Overtemperature protection Short-circuit protection Reverse polarity protection Designed for continuous and reliable operation. Why Choose This 25A Power Supply? Compared to smaller units, 25A offers: higher process stability better results on medium to large surfaces faster deposition rates fewer plating defects The perfect “sweet spot” between entry-level and professional systems. Typical Applications Gold plating jewelry and components Copper and nickel plating Chrome plating automotive parts Restoration and refinishing Industrial and technical coatings Quick Start Guide Connect the workpiece (cathode) Connect the anode Select the electrolyte Adjust voltage and current Start plating and fine-tune as needed Precise control ensures optimal coating performance. Conclusion – The All-Rounder for Electroplating The 25A electroplating power supply is the ideal choice for users who want: professional results flexible application reliable performance It is the most commonly used power level in electroplating, offering the perfect mix of power and control. Buying Argument If you want one device that covers almost everything: 25A is the perfect choice – powerful, precise, and future-proof. Entry level: 10A power supplies Advanced: 25A systems High-performance: 40A and above

Stainless Steel Electrode Ø 6 mm – Universal Electrode for Activating, Degreasing, Dechroming and Chromium PlatingDurable Stainless Steel Electrode for Professional Tank, Pen and Brush PlatingThe Stainless Steel Electrode Ø 6 mm is manufactured from high-quality, corrosion-resistant stainless steel and has been specially designed for a wide range of electroplating applications. It is ideal for electrolytic degreasing, surface activation, dechroming and chromium plating, providing reliable current transfer in tank plating, pen plating and brush (tampon) plating.Its excellent chemical resistance and mechanical strength ensure a long service life, making it the perfect choice for workshops, laboratories and industrial applications.Your AdvantagesManufactured from high-quality corrosion-resistant stainless steelRobust and durable constructionExcellent electrical conductivityIdeal for electrolytic degreasing and surface activationPerfect for dechromingIdeal for chromium platingSuitable for tank plating, pen plating and brush platingFits standard 6 mm electrode holdersEasy to useProfessional quality from Betzmann GalvanikWhy Use a Stainless Steel Electrode?Stainless steel electrodes are primarily used for pretreatment and cleaning processes. They offer excellent resistance to many electrolytes while providing reliable electrical conductivity with minimal wear.They are particularly suitable for:Electrolytic degreasingSurface activationDechromingChromium platingCleaning processes before electroplatingTypical ApplicationsIdeal for:Electrolytic degreasingSurface activationDechromingChromium platingPretreatment of metal componentsTank platingPen platingBrush (tampon) platingWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from high-quality stainless steel and offers:Excellent corrosion resistanceGood electrical conductivityHigh mechanical strengthLong service lifeVersatile applicationsApplication InstructionsBefore use:Thoroughly clean the workpieceRemove grease and contaminationUse a suitable electrolyteFollow the recommended voltage and current settingsImportant Note:For precious metal plating such as gold, silver, palladium or platinum, we recommend using a graphite or platinum electrode, as these do not contaminate the electrolyte with metal ions. Stainless steel electrodes are primarily intended for activation, cleaning, dechroming and chromium plating applications.Technical SpecificationsMaterial: Corrosion-resistant stainless steelDiameter: 6 mmLength: approx. 95 mmExcellent chemical resistanceSuitable for standard electrode holdersPackage Contents1 × Stainless Steel Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Stainless Steel Electrode Ø 6 mm offers outstanding durability, excellent chemical resistance and versatile performance, making it the ideal choice for degreasing, activation, dechroming and chromium plating in hobby, workshop and industrial environments.