Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

T Gel Thickener BMG‑121.3 Additive for Viscosity Control – Converts Electrolytes into Non-Drip Gels Short Description The Gel Thickener BMG‑121.3 is a specially developed chemical additive that increases the viscosity of electroplating solutions, transforming them into non-drip, gel-like media. This is particularly useful for vertical surfaces or complex-shaped objects, allowing for precise and controlled application without dripping. Applications The Gel Thickener is used to: Increase the viscosity of electroplating solutions Enable drip-free coating on vertical or inclined surfaces Allow precise application on complex or fine structures Reduce material loss caused by dripping Achieve decorative effects in electroplated finishes Ensure uniform coating thickness without runs or streaks How the Gel Thickener Works (Simple Explanation) Some electrolytes are thin and may drip on vertical or inclined surfaces. The Gel Thickener is added in a defined amount to create a gel-like solution that stays in place: Prepare the electroplating solution as usual. Measure and add the Gel Thickener (e.g., 1 part thickener to 10 parts electrolyte; adjust according to desired viscosity). Stir thoroughly until a homogeneous, gel-like consistency is achieved. Apply or plate as usual – the gel adheres to the surface without dripping. Adjusting the ratio allows you to fine-tune the gel consistency from lightly gelled to strongly gel-like. Benefits of Gel Thickener BMG‑121.3 Significantly increased viscosity for precise, drip-free application Controlled, accurate coating on difficult shapes Reduces material waste due to dripping Ensures uniform layer distribution Easy to dose and use Compatible with various electroplating solutions Technical Parameters (Guideline Values) PropertyValue / RangeProduct typeGel thickener / viscosity additiveUseIncreases viscosity of electroplating solutionsMixing ratio*approx. 1:10 (thickener : electrolyte)ConsistencyFrom lightly gelled to strongly gel-likeTemperatureRoom temperatureStorageCool, dry, tightly closedCompatibilityWith standard electroplating solutionsSafetyChemical additive – use protective measures * Optimal ratio depends on the solution, desired gel strength, and application; testing is recommended. Practical Application Instructions Preparation: Prepare the electroplating solution as usual. Dosage: Slowly add the Gel Thickener to the solution in small increments. Adjust according to the desired viscosity. Mixing: Stir thoroughly until a homogeneous gel is obtained. Let rest briefly to remove air bubbles. Application: Apply the gel to vertical or complex surfaces without dripping. After plating, rinse the parts with clean water and dry carefully. Polishing may enhance the finish. Safety Instructions Wear protective gloves, goggles, and appropriate clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use in well-ventilated areas Do not ingest; keep out of reach of children Dispose of according to local chemical regulations Conclusion The Gel Thickener BMG‑121.3 is an effective, easy-to-use additive that converts electroplating solutions into non-drip, gel-like media, enabling precise and controlled coatings on vertical, inclined, or complex surfaces. Its flexibility and ease of use make it an invaluable tool for hobbyists, workshops, and professional electroplaters seeking clean, uniform, and drip-free results.