Real Gold License

BMG- 25 amp galvanic unit - Betzmann Galvanik - Real Gold  With this device you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market.   There is no size limit from 25 A! No matter if coins, screws or 20 meters of stainless steel pipes in one piece!    - Real Gold (999-fine gold) - Rose gold, white gold, antique gold - Silver            - Nickel - alkaline or acid copper - Chrome - Black Chrome - Rhodium - black rhodium - Palladium - Platinum - zinc, tin - Bronze  So everything we have according to the price list     Scope of delivery / technical details: Basic unit Power supply unit 2.7 - 15 Volt adjustable, depending on availability 25 Ampere analog or digital display, depending on availability, power plug  High Power 25 Amp switch mode power supply with two analog or digital measuring instruments for output voltage and output current -     Technical data  Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 Kg.        

Betzmann Galvanik - Complete tampon brush plating line with extensive accessories and electrolyte set for chrome plating    There is no size limit from 25 A! No matter if coins, screws or 20 meters stainless steel pipe in one piece!    With this complete electroplating system you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. e.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words, everything that we carry according to our price list    Scope of delivery:    1x electroplating unit with 25 Ampere, adjustable 2.5 to 15 Volt, analog or digital depending on availability, power cable.  3x cable PLUS  1x cable MINUS with clamp  3x handle  3x stainless steel electrodes thick 6mm  1x stainless steel electrode thin 4mm  10x fabric pads mixed  10x cup with lid, scaled    1000 ml chrome  100 ml gold bottle  250 ml nickel  250 ml alkaline copper  1000 ml chrome remover for dechroming  1000 ml Electrocleaner for degreasing  1000 ml activator for nickel layer  - 3 x plastic electroplating work trays - different sizes  - 1 x spray bottle  - 1x manual in German or English in pdf, training films and guides in PDF  - Personal technical support in Germany free of charge, 12 months warranty  - Free training with us, individual lessons, personal instruction, unlimited and free advice from our team  - Support at trade fairs and presentations, advertising measures    High Power 25 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -    Technical data    Operating voltage  230 Volt-AC/ 50Hz  Output voltage  3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side  Output current  25 amps constant  25 amperes short-term  Ripple & Noise  <50mV  load regulation  <200mV  line regulation  <50mV  Displays & movements  Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green  DC connection sockets  screwable pole terminals  Cooling  Fan  Security  Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts  Extras  dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability  Dimensions(WxHxD)  220x110x300 mm  Weight  3.5 kg    

BMG-25A - Electroplating line - complete basic equipment with electrolyte set for chrome       With this complete set you achieve absolutely perfect results!   No matter what size, whether 10 meters of railing or a 28 inch rim, this machine can coat any surface.   With 100 ml electrolyte you usually manage 1m2, so it is quite productive!   With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chromed surfaces or chromed plastic (conductive layer) with all metals available on the market. e.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words everything we have on stock according to our price list.     Scope of delivery: 1x Power Rectifier, galvanic unit depending on availability with 25 A digital or analog, adjustable 2.5 to 15 Volt, power cord,            1x cable PLUS  1x cable MINUS with clamp 1x handle 3x stainless steel electrodes thick 6mm 1x Aluminium Electrode for Chromplating 6mm  6x sleeves   6x cups with lid, scaled   250 ml chrome  250 ml Nikel   250 ml Copper alkali   250 ml chrome remover for dechroming  250 ml Electrocleaner for degreasing  250 ml activator     Manual in German or English, training films, guides via PDF / E-MAIL  Free personal technical support, 12 months warranty, free personal training and support, unlimited and free advice from our team   Immediately ready for gilding! Can be supplemented with chrome - black rhodium - silver and much more.    High Power 25 or 40 Amp switch mode power supply with two analog measuring instruments for output voltage and output current -    Technical data    Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 Kg.    

BMG-25A - Betzmann-Galvanik - Electroplating plant complete basic equipment with electrolytes and gold     Herewith you achieve absolutely perfect results! No matter what size, whether 10 meters of railing or a 28 inch rim, this machine can coat any surface. With 100 ml electrolyte you usually manage 1m2, so it is quite productive!   With this electroplating unit you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market. e.g. real gold (999 fine gold) - rose gold, white gold, antique gold - silver - nickel - alkaline or acid copper - chrome - black chrome - rhodium - black rhodium - palladium - platinum - zinc, tin - bronze - in other words everything we have on stock according to our price list.   Scope of delivery:   1x Electroplating unit 25 A digital, adjustable 2.5 to 15 Volt, analogue or digital depending on availability, mains cable,  1x cable PLUS  1x cable MINUS with clamp 1x handle 3x stainless steel electrodes thick 6mm 1x stainless steel electrode thin 4mm  6x fabric pads mixed 6x cups with lid, scaled  100 ml gold electrolyte 8 G./L. is sufficient for 1m2 surface 100 ml nickel   250 ml chrome remover for dechroming  250 ml Electrocleaner for degreasing  250 ml activator for nickel layer    Manual in German or English as PDF, training films, guides as PDF /EMAIL Personal technical support free of charge, 12 months warranty, free personal instruction and support, unlimited and free advice from our team   Immediately ready for gilding! Can be supplemented with chrome - black rhodium - silver and much more.    High Power 25 Amp switch mode power supply with two digital measuring instruments for output voltage and output current -        Technical data    Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 kg