Conductivity Tester

  Silver conductive lacquer (12 grams or 50 grams contains 50% pure silver powder) ready conductive lacquer for application - also suitable for airbrush    For the coating of non-conductive materials such as wood, glass, plastic, this conductive silver lacquer can be used by Betzmann electroplating can be a helpful support.  It should be noted that you must prepare the substrate perfectly so that the paint adheres there optimally. After drying, it will provide a conductive surface and can be coated. Children's shoes, flowers, etc. can thus be coated.  You can apply it with a brush or also with an airbrush gun. The smoother and shinier the paint layer, the higher the degree of gloss of the coating - please use very long and thick acid or copperplate with PP-copper. This brings the gloss!   Conductive silver lacquer, conductive silver - contains 50 % pure silver powder in acrylic lacquer (water-based) The Betzmann Condurctive Silver Ink has many different uses:  "Liquid wire" for model making and electronic work.  Especially suitable for difficult areas. As an artist's paint, for grey metal paints For cars, repair works, preparation for galvanizing, handicraft and painting, model making such as aircraft, ships, railroads.  Adheres to almost all surfaces. If in doubt, make a small test before application. Water-based, solvent-free. The paint dries solid, is highly elastic and water-insoluble with grayish yellow color. And can be painted over with most other paints. High mechanical strength. Quantity depending on the substrate, usually 2-3 strokes with a thin brush. Average grain size under approx. 15µm Keep away from children. Dilutable and brush cleaning with water. Shake well before use, stir up better, also stir up again in between while working the heavy silver particles sink down quickly.      H225 Highly flammable liquid and vapor  flammable. H336 May cause drowsiness or dizziness.  May cause drowsiness or dizziness. H410 Precautionary statements Very toxic to aquatic life with long lasting  effect. P102 Keep out of the reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other  Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.  Do not smoke. P273 Avoid release to the environment. P370+P378 In case of fire: Use sand, extinguishing powder or  alcohol-resistant foam for extinguishing. P391 Take up spillage. P403+P235 Store in a well-ventilated place. Keep cool  P501 Collect in suitable, closed containers and take for disposal.      

Conductive copper lacquer from Betzmann Galvanik Real Gold    Copper conductive lacquer from Betzmann Galvanik    Product information copper conductive lacquer Article description: The copper conductive lacquer from Betzmann Galvanik at a glance:   50 or 200 ml copper conductive lacquer for electroplating for airbrush and brush non-conductive objects can be made conductive plants and natural objects can be electroplated easy and filigree application possible With the copper-based Galvano conductive lacquer from Betzmann Galvanik, you can coat works of art and gifts made of glass, ceramics, plastic and many other materials with a shiny layer of metal even in a short time. Perfect as an exclusive gift or for your own showcase! Also very suitable as a decorative varnish due to the strong gloss effect.   Simply apply the copper conductive lacquer thinly with a brush on the cleaned surface. The copper conductive lacquer dries smudge-proof within 10 to 15 minutes and thus allows a quick processing of the workpieces. Complete drying for optimum hold on stressed surfaces takes approximately 12 - 36 hours at room temperature. The varnish can be thinned with butyl acetate or isopropanol. The next step is to connect the item with a wire and copperplate it in the acidic bright copper electrolyte from our store. A robust layer of copper will then be deposited. In the last step you can still nickel, silver and also gold or chrome plating the copper!   Due to its lower price and high electrical and thermal conductivity, the copper conductive lacquer is thus the perfect alternative to silver conductive lacquer. Please note that copper plating must be carried out in the acidic copper electrolyte in the first step, as this activates the conductive lacquer. After copper plating, the metal layer is abrasion-resistant.   Suitable materials: plastic, glass, ceramics, plants, wood and many other electrically non-conductive materials.   Drying time: 5-15 minutes (smudge-proof), 1-3 days (complete for maximum demands)   20 mL is enough for an area of up to one square meter - so very productive!