Chrome Stripper

Real Gold

€9.50*

Content: 0.25 Liter (€38.00* / 1 Liter)

(€5.04 ohne MwSt.)

Prices incl. VAT plus shipping costs

Available, delivery time: 1-2 days

250 ml

500 ml

1000 ml

2000 ml

5000 ml

Product number: BMG-062.3

PDF offer

Create PDF offer for this product Tip: Add multiple products to the cart and create the offer there. Logged in users get an individualized offer.

Product information "Chrome Stripper"

Chrome remover - Chrome stripper from Betzmann Galvanik :

Our chrome remover effortlessly removes any layer of chrome, regardless of its thickness, and also cleans the surface.

Please note: The chrome remover only works with alternating polarity. Handle minus and crocodile clip PLUS.

The chrome dissolves yellow and therefore also serves as a test to determine whether the material is actually chrome-plated. The chrome remover does not attack paints and varnishes.

You can remove any chrome quickly and safely with our chrome remover.

But what is chrome removal for? It's simple: chrome-plated components are usually coated with an oxide layer and therefore cannot be electroplated.

therefore cannot be electroplated. During dechroming, the chrome layer is removed and the layer underneath is available for electroplating.

available for electroplating. For example, after dechroming, you can coat previously chrome-plated rims or car parts or

all chrome-plated parts yourself. The gloss of the surface is not affected.

You can use the Betzmann electroplating dechromer to

Dechrome lettering

Dechroming fittings

Dechroming rims

Dechroming exhaust pipes

General chrome removal from chrome-plated components

The use of our chrome remover applies to immersion electroplating and pin electroplating / manual electroplating.

Connect the object from which you want to remove the chrome to the positive pole (red) of the power supply unit using a clamp.

Then connect the pin to the negative pole (black). Set a voltage of 6 volts or more and use the pad to pick up the chrome remover.

pick up the chrome remover. Then touch the workpiece with the pad and slowly move the pen around on the chrome surface.

The chrome will turn yellowish.

You can find more detailed instructions on how to carry out the procedure and safety instructions for dechroming in our instructions for use for this product

(see links and downloads).

madeingermany-betzmann

Operating Parameters

	For Brush Stripping	For Tank Stripping
Plating Factor	–	0.01 – 0.04 A/cm2
Voltage	4 – 6 volts	4 – 6 volts
Temperature	Room	Room
Agitation	–	Optional (stirrer)
Work piece polarity	Positive	Positive
Electrode/Anode	Carbon (preferred), stainless steel or platinum	Stainless Mesh Electrode (recommended) or Mesh Electrode
Processing time	2 microns per minute at 5 volts	1 micron per minute a 5 volts
Shelf Life (bottled)	Over 5 years	Over 5 years

Labeling according to EC Regulation No. 1272/2008

GHS07ENF5LtKTBYblK betzmann-galvanik-solution

Signal word: Caution - Corrosive

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of the reach of children.

P260 Do not breathe dust/fume/gas/mist/vapor/spray.

P264 Wash hands thoroughly after handling.

P272 Do not wear contaminated work clothing outside the workplace.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin with water/shower.

P321 Specific treatment (see instructions on this label).

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P321 Special treatment (see instructions on this label).

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P352 Wash with plenty of soap and water.

P363 Wash contaminated clothing before reuse. P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P310 Immediately call a POISON CENTER or doctor.

P321 Specific treatment (see instructions on this label).

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.

P310 Immediately call a POISON CENTER or doctor.

P405 Keep locked up

Similar Items

Nickelstripper

Nickel stripper strips nickel plating from steel, copper, brass and silver easily and delivers the following pluses; Ready-to-use solution: no need for mixing Low hazzard Stripping rates of up to 50 microns per hour at 62 °C High capacity (1 litre can strip 40 grams of nickel) Low odour: minimum ventilation needed Supplied as a one-component, ready-to-use solution Non-electrolytic stripper: no need for a separate rectifier Long bath life Can be shipped worldwide Operating Conditions Temperature Range 50 -65 °C (see notes) Tank Glass (see notes below), steel or polypropylene Agitation Mechanical (stirrer). Never use air agitation Stripping rate See notes below Stripping capacity Can strip up to 40 grams of nickel per litre Special storage requirements None Shelf life 1 – 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) None: Not classified as dangerous for transport Notes: Tanks should be made of stainless steel, polypropylene or glass. If using glass,return the solution (cooled) to the container after use. Heating should be provided by a Teflon-coated stirring bar (if stripping in a beaker). For larger installations, stainless steel or titanium-sheaved heaters should be used. Stripping rates can be almost doubled by using light mechanical agitation: Stripping rate at 50°C = 10 microns per hour (no agitation) Stripping rate at 50°C = 17 microns per hour (with agitation) Stripping rate at 62°C = 50 microns per hour (with agitation) Black smut remaining can be removed by ultrasonic cleaning or scouring with pad. Nickelentferner GHS07 - Signal word: Caution H-phrases: H317: May cause an allergic skin reaction. P-phrases: P102: Keep out of the reach of children. P260: Do not breathe aerosol. P280: Wear protective gloves / eye protection. P302 + P352: IF ON SKIN: Wash with plenty of water. P501: Dispose of contents/container to hazardous waste.

Content: 0.25 Liter (€100.00* / 1 Liter)

From €25.00*

Details

Stainless Steel Electrode 6mm

Stainless Steel Electrode 6mm: This electrode is ideal for chrome stripping and electro-cleaning. To swap over to a stainless steel electrode, simply loosen the existing electrode and fit in the new one. Stainless steel electrodes should not be used for any other processes such as the metal can cause contamination of the plating solution resulting in considerable wastage of gold metal. Selecting the best electrode for the job is very important.

€5.90*

Anode sleeve fuzzy

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.

€2.38*

Activator

Galvano activator and decapping agent in one - stainless steel and nickel activator in one - from Betzmann GalvanikThe GALVANO AKTIVATOR from Betzmann Galvanik removes oxide layers on base metals to enable electroplating or electroless plating. The electroplating activator is required, for example, for electroless nickel plating of aluminium or to activate stainless steel, nickel, brass and chrome for electroplating.Discover the versatile application of the activator or decapping agent in electroplating! The activator / decapping agent is an indispensable aid for the decapping and preparation of surfaces before plating in the electroplating industry. It is used to activate surfaces of metals such as steel, copper and copper alloys as well as passive nickel layers. Decapitation removes impurities from surfaces and simultaneously prepares them for the plating process. This process is crucial to ensure optimum adhesion and durability of the coating. After alkaline pre-treatment, the decapping agent is also perfect for neutralising. It ensures that work with sulphuric or hydrochloric acid is no longer necessary, which not only increases efficiency but also improves work safety.With Betzmann Galvanik's decapping agent, you can effectively pre-treat the surface of your products to achieve high-quality electroplated coatings. Rely on its proven performance to optimise your electroplating processes and achieve outstanding results.Field of application: Pre-treatment and cleaner - General applicationThe object is either immersed in the activator for 30 to 60 seconds and then briefly rinsed with clear water or coated with the pad for at least 30 seconds from 2.7 volts. The activator removes thin layers of oxide that are invisible to the naked eye. Carry out further coating quickly after the activator bath, as these layers quickly form again with atmospheric oxygen (time period: max. 10 - 30 minutes) Recommended electrode: Stainless steel electrode or graphite electrode! Recommended voltage: from 2.7 volts Regulation (EC) No. 1272/2008 Signal word: Warning Pictograms: H319 Causes serious eye irritation Hazard statements P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention.

Content: 0.25 Liter (€33.60* / 1 Liter)

From €8.40*

Details