Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Platinum Mesh Electrode 100 × 40 mm – Platinized Titanium Anode for Professional ElectroplatingPremium Platinum Mesh Electrode for Gold, Rhodium, Platinum, Palladium and Chromium ElectrolytesThe Platinum Mesh Electrode 100 × 40 mm is a premium platinized titanium anode designed for demanding electroplating applications. Its fine mesh structure provides a significantly larger active surface area, ensuring excellent current distribution and uniform metal deposition across the entire workpiece.The robust titanium substrate is coated with an approximately 2.7 µm platinum layer, combining the mechanical strength of titanium with the outstanding chemical resistance and electrical conductivity of platinum. The result is reliable, long-lasting and highly reproducible electroplating performance, even when used with aggressive electrolytes and high current densities.Your Advantages at a GlanceHigh-quality platinized titanium mesh electrodeApprox. 2.7 µm platinum coatingLarge active surface areaExcellent current distributionUniform and high-quality metal depositionOutstanding chemical resistanceExtremely long service lifeHigh current carrying capacityMinimises electrolyte contaminationDesigned for professional tank platingPremium quality from Betzmann GalvanikWhy Choose a Platinum Mesh Electrode?The quality of any electroplated coating depends greatly on the anode being used. The open mesh design distributes current evenly across the electrode, resulting in homogeneous metal deposition and superior coating quality.The platinum coating protects the titanium substrate against corrosion while preventing contamination of the electrolyte. This ensures consistent bath performance and repeatable, high-quality plating results over an extended service life.Typical ApplicationsIdeal for:Gold plating electrolytesRhodium plating electrolytesPlatinum plating electrolytesPalladium plating electrolytesRose gold electrolytesBlack rhodium electrolytesBlack nickel electrolytesChromium plating electrolytesPrecious metal electroplatingJewellery manufacturingJewellery repairWatchmakingLaboratoriesResearch and developmentIndustrial electroplatingProfessional surface finishingBenefits of a Platinized Titanium AnodeThe combination of titanium and platinum provides numerous advantages:Exceptional chemical resistanceExcellent electrical conductivityHigh mechanical strengthLong operating lifeMinimal wearUniform current distributionReliable electroplating performanceCompared with solid electrodes, the mesh design offers a much larger active surface area, resulting in improved plating uniformity and greater process efficiency.ApplicationBefore use:Thoroughly clean and activate the workpiece.Use a suitable electrolyte.Position the electrode correctly inside the plating bath.During electroplating:Connect the electrode to the positive terminal (+ / anode).Connect the workpiece to the negative terminal (- / cathode).Adjust the voltage and current according to the electrolyte manufacturer's recommendations.After use, rinse the electrode with clean water and remove any residues to maximise its service life.Technical SpecificationsMaterial: Titanium with platinum coatingPlatinum coating thickness: approx. 2.7 µmDesign: MeshDimensions: 100 × 40 mmOperating voltage: From approx. 3 VpH range: 0–11Operating temperature: Up to approx. 60 °CHigh anodic current capacityPackage Contents1 × Platinum Mesh Electrode 100 × 40 mm (Platinized Titanium Anode)Quality from Betzmann GalvanikThe Platinum Mesh Electrode 100 × 40 mm has been developed for professional electroplating applications where maximum reliability and coating quality are required. Its premium platinum coating, outstanding chemical resistance and long service life make it the ideal anode for precious metal plating and demanding industrial electroplating processes.

Gelling Agent / Thickener – Additive for Drip-Free Electroplating Solutions and Precise CoatingsGelling Agent for Electrolytes – Greater Control for Pen Plating, Tampon Plating and Tank PlatingThe Gelling Agent / Thickener from Betzmann Galvanik is a specially developed additive for increasing the viscosity of electroplating electrolytes. By adding the thickener, low-viscosity electrolytes are transformed into a gel-like, low-drip consistency. This allows the electrolyte to remain on the workpiece surface for longer, making it easier to achieve precise and controlled plating results.It is particularly suitable for pen plating, tampon plating, and plating on vertical, inclined or complex-shaped surfaces, where it prevents the electrolyte from running off and significantly reduces solution loss. It is also ideal for selective plating, repair work and localized metal deposition.Your Advantages at a GlanceIncreases the viscosity of electroplating electrolytesConverts liquid electrolytes into a gel-like consistencyPrevents dripping and running on vertical surfacesReduces electrolyte consumptionEnables more precise pen plating and tampon platingImproves coating uniformityIdeal for repair plating and selective platingEasy to mix and useCompatible with many electroplating electrolytesWhy Use a Gelling Agent?Most electroplating electrolytes have a relatively low viscosity. On vertical or inclined workpieces, the electrolyte quickly runs off, which can result in:Uneven coating thicknessElectrolyte lossDrip marksPoor coating definitionIncreased electrolyte consumptionThe gelling agent keeps the electrolyte exactly where it is needed, making the plating process easier while improving coating quality and efficiency.Typical ApplicationsThe gelling agent is ideal for:Pen platingTampon platingSelective electroplatingLocal gold platingRepair gold platingVertical surface platingComplex workpiece geometriesJewellery manufacturingRestoration workModel makingPrecision engineeringApplicationSlowly add the gelling agent to the electrolyte while stirring until the desired consistency is achieved.Recommended mixing ratio:Approximately 1 part gelling agent to 10 parts electrolyteThe exact ratio may be adjusted depending on the electrolyte and the desired gel consistency.After mixing, a homogeneous gel structure should be obtained before use.Suitable ElectrolytesThe gelling agent can be used with many electroplating electrolytes, including:Gold electrolytesSilver electrolytesNickel electrolytesCopper electrolytesRhodium electrolytesMany other compatible electroplating solutionsFor new electrolyte systems, we recommend testing compatibility before large-scale use.Technical InformationProduct Type:Gelling Agent / ThickenerApplication:Increasing the viscosity of electroplating electrolytesRecommended Mixing Ratio:Approx. 1 : 10 (Gelling Agent : Electrolyte)Consistency:Adjustable from slightly thickened to highly gel-likeApplication Temperature:Room temperatureStorage:Store tightly closed in a cool and dry place.Practical Tips✔ Add the gelling agent slowly while stirring.✔ Adjust the mixing ratio gradually until the desired consistency is reached.✔ Allow the mixture to stand briefly before use so trapped air bubbles can escape.✔ Perfect for vertical surfaces and localized plating.✔ Especially recommended for gold, silver and rhodium plating applications.Safety InformationWear suitable protective gloves and safety glasses.Avoid contact with skin and eyes.Follow the Safety Data Sheet (SDS).Use only in well-ventilated areas.Keep out of reach of children.Quality from Betzmann GalvanikThe Gelling Agent / Thickener is the ideal additive for professional electroplating applications. It improves process control, reduces electrolyte consumption and enables clean, uniform and precise metal coatings, especially on demanding workpieces and during selective plating.SEO for Shopware 6Product TitleGelling Agent / Thickener – Additive for Electroplating Electrolytes and Drip-Free PlatingSEO URLgelling-agent-thickener-electroplating-electrolyteSEO TitleGelling Agent Thickener | Additive for Electroplating Electrolytes | Betzmann GalvanikMeta DescriptionProfessional gelling agent and thickener for electroplating electrolytes. Increases viscosity, prevents dripping and improves control during pen plating, tampon plating and tank plating. Suitable for gold, silver, nickel and copper electrolytes.Keywordsgelling agent, electrolyte thickener, electroplating thickener, electroplating additive, plating gel, electrolyte additive, pen plating gel, tampon plating additive, gold electrolyte thickener, silver electrolyte thickener, nickel electrolyte additive, copper electrolyte thickener, electroplating accessories, Betzmann GalvanikLong-Tail Keywordsgelling agent for electroplating electrolytes, thickener for gold plating electrolyte, pen plating gel additive, tampon plating electrolyte thickener, prevent electrolyte dripping during plating, electroplating viscosity additive, professional electroplating thickener