Platin
Platin Elektrode für optimale Ergebnisse
Geht es darum, dass Baugruppen, Metallkomponenten oder Prototypen entweder versilbert oder vergoldet werden sollen, gehört die Platin Elektrode von Anfang an zur Grundausstattung. Nur durch die Anwendung einer Platin Elektrode und eines passenden Elektrolyts lassen sich hier saubere und gute Ergebnisse erzielen. Wenn Sie eine neue Platin Elektrode kaufen möchten, können Sie sich auf die Angebote aus unserem Online-Shop verlassen. Wir führen eine Auswahl an hochwertigen Elektroden und das beste Platin-Elektrolyt, das es aktuell auf dem Markt gibt.
Vorteile einer guten Platin Elektrode
Eine gute Platin Elektrode erkennen Sie vor allem an den Ergebnissen, die Sie beim Vergolden oder Versilbern erzielen. Wichtig ist in erster Linie, dass durch die Platin-Elektrode keine dunklen Tupfer oder Flecken auf der Beschichtung entstehen. Des Weiteren sollten sie sicher anzuwenden sein und sich kaum abnutzen. Bei der richtigen Handhabung und Pflege können Sie Ihre Platin-Elektrode lange nutzen. So steht Sie ihnen immer wieder beim Vergolden oder Versilbern zur Verfügung. Achten Sie darauf, dass Sie die Elektrode nach der Anwendung sorgfältig reinigen, sodass keine Rückstände zurückbleiben.
Platin Elektrode oder Graphit Elektrode - was ist die bessere Wahl
Um galvanisch vergolden oder versilbern zu können, stehen als Hilfsmittel die Graphit- und Platin Elektrode zur Auswahl. Graphitelektroden galten lange Zeit als Mittel der Wahl, weil sie besonders langlebig und robust sind. Doch sie haben einen Nachteil. Sie sorgen tatsächlich relativ schnell für unschöne Flecken auf der Oberfläche der Beschichtung. Bei der Platin Elektrode ist das dagegen eher selten. Hier können Sie stattdessen auf ein sauberes Ergebnis vertrauen. Darüber hinaus stehen die Platin Elektroden den Modellen aus Graphit in Sachen Qualität und Langlebigkeit in kaum etwas nach.
Anode sleeve fuzzy
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.
Platinum Electrode
Platinum electrode from Betzmann-Galvanik: We know that when plating with gold or silver, you want to achieve only the best results and this is achieved by using our platinum electrode (platinized titanium). This will more than meet your requirements. It hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, we recommend the use of this electrode. Care should be taken to clean the electrode carefully after each use! Properties "Platinum Electrode 6 mm Platinum electrode (platinized titanium with a platinum layer of 2.5 µm platinum) Ø 6 mm x 100 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials, etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 2.5 μm. In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable. This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode. Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates. Recommended operating data: Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C
Platinum Electrode Mesh
Product Information "Platinum Electrode Mesh for Bath Electroplating" by Betzmann-Galvanik: This platinized titanium anode Mesh with handle in the size 100x40 mm was coated with 5µm platinum. This platinized titanium anode is perfectly suitable for rhodium, platinum and gold plating baths, furthermore for rose gold, platinum, black nickel, black chrome, black rhodium and many more. Properties "Platinum Electrode Mesh Platinum electrode (platinized titanium with a platinum layer of 5 µm platinum) 100 mm x 40 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 5 μm. In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable. This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode. Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates. Made in Germany! Recommended operating data: Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C
Platinum Solution 2 G./Liter
Platinum Electrolyte with 2 Gramm Platinum per Liter! Platinum Bath - Platinizing with Betzmann Electroplating Platinum is characterized by high abrasion resistance and gives a noble gray surface. Alternative: White palladium The platinum bath from Betzmann Galvanik deposits corrosion-resistant, very bright and shiny platinum layers up to a thickness of 0.5 - 1.0 µm. It is suitable for both decorative and technical applications and is very well suited for pin, bath and pad electroplating!.. Operating data: Platinum content: 2.0 g/L pH-value: <1 Density: 1.08 g/ml, increasing Working conditions: Voltage: from 3 volts Bath temperature: 30 - 40 °C Exposure time: 2 - 4 min. Anode material: platinized titanium Anode/cathode surface: 1 : 1 Fabric movement: required Recommended speed: 2 - 8 cm/sec. Deposition rate: approx. 11 mg/Amin; approx. 0.5-1.5 A/dm2 Bath movement: recommended Precipitation data: Hardness: 500 HV Layer thickness: max. 1.0 µm Fineness: 99,9% Delivery form: Ready to use 2 g/L Pt Features Applications High concentration of platinum – 2 grams per litre Suitable for brush plating both decorative and functional items such as jewellery and electrical connectors Operating Conditions and Deposit Data Voltage Range 3.0 – 5.0 volts Temperature 20 – 25 °C (25 °C preferred) Platinum concentration 2 g/l Electrode Platinum - Carbon Platinum content in plate Above 99.9% Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.25 micron per minute (spot) – see notes) Hardness 405 Hv Density of deposit 21.4 g/cm3 Electrical resistivity of deposit 9.8 micro ohms/cm Stress Not determined Special storage requirements None Shelf life Over 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) 2796 Notes: We strongly advise against the use of stainless steel anodes for most of our plating processes. Higer voltages give greater plating rates, however more gas is liberated and a mist mask is recommended. Plating rates are calculated over a sample area which is permanently covered by swab. Will plate directly onto freshly prepared nickel or stainless steel. Hazard statements H314 Causes severe skin burns and eye damage. Precautionary statements P280 Wear protective gloves/protective clothing/eye protection/face protection. P302 IN CASE OF CONTACT WITH SKIN: P352 Wash with plenty of water. P332 If skin irritation occurs: P313 Get medical advice/attention. P362 Take off contaminated clothing.
Content: 0.05 Liter (€300.00 / 1 Liter)
Platinum Solution 6 G./Liter
Platinum Electrolyte with 6 Gramm Platinum per Liter! Platinum Bath - Platinizing with Betzmann Electroplating Platinum is characterized by high abrasion resistance and gives a noble gray surface. Alternative: White palladium The platinum bath from Betzmann Galvanik deposits corrosion-resistant, very bright and shiny platinum layers up to a thickness of 0.5 - 1.0 µm. It is suitable for both decorative and technical applications and is very well suited for pin, bath and pad electroplating!.. Operating data: Platinum content: 6.0 g/L pH-value: <1 Density: 1.08 g/ml, increasing Working conditions: Voltage: from 3 volts Bath temperature: 30 - 40 °C Exposure time: 2 - 4 min. Anode material: platinized titanium Anode/cathode surface: 1 : 1 Fabric movement: required Recommended speed: 2 - 8 cm/sec. Deposition rate: approx. 11 mg/Amin; approx. 0.5-1.5 A/dm2 Bath movement: recommended Precipitation data: Hardness: 500 HV Layer thickness: max. 1.0 µm Fineness: 99,9% Delivery form: Ready to use 6 g/L Platinium Features Applications High concentration of platinum – 6 grams per litre Suitable for brush plating both decorative and functional items such as jewellery and electrical connectors Operating Conditions and Deposit Data Voltage Range 3.0 – 5.0 volts Temperature 20 – 25 °C (25 °C preferred) Platinum concentration 6 g/l Electrode Platinum - Carbon Platinum content in plate Above 99.9% Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.25 micron per minute (spot) – see notes) Hardness 405 Hv Density of deposit 21.4 g/cm3 Electrical resistivity of deposit 9.8 micro ohms/cm Stress Not determined Special storage requirements None Shelf life Over 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) 2796 Notes: We strongly advise against the use of stainless steel anodes for most of our plating processes. Higer voltages give greater plating rates, however more gas is liberated and a mist mask is recommended. Plating rates are calculated over a sample area which is permanently covered by swab. Will plate directly onto freshly prepared nickel or stainless steel. Hazard statements H314 Causes severe skin burns and eye damage. Precautionary statements P280 Wear protective gloves/protective clothing/eye protection/face protection. P302 IN CASE OF CONTACT WITH SKIN: P352 Wash with plenty of water. P332 If skin irritation occurs: P313 Get medical advice/attention. P362 Take off contaminated clothing.
Content: 0.05 Liter (€680.00 / 1 Liter)
Flat Platinum Electrode XL
Flat Platinum Electrode XL: For gold plating larger surface areas and other un-complex shaped articles. Size of plating: 5,5 x 5,5 cm Features Used for Made from platinised titanium Plating large, flat surface areas 2-3 times faster than a standard rod electrode Electrode dimensions: 5,5cm x 5,5 cm Ideal for fast gold plating of large un-contoured areas