Galvanic Power Supply 25 A (BMG-25A) Adjustable Power Unit for Electroplating and Laboratory Applications Short Description The Galvanic Power Supply 25 A (BMG-25A) is a powerful, electronically regulated power unit designed for electroplating, laboratory experiments and precision coating processes. With a continuous output up to 25 Amps and fine voltage regulation, this supply provides maximum control over electrochemical applications — suitable for hobbyists, workshops, educational labs and professional usage. It combines high performance, precision and ease of use for all processes requiring stable and adjustable DC power. Applications This power supply is ideal for: Electroplating processes (e.g., copper, nickel, gold, palladium) Laboratory experiments in electrochemistry Precise control of current and voltage in electrolytic operations Brush, pen and tank plating Educational, workshop and R&D environments Key Features & Benefits High Current Capacity – up to 25 A Allows larger or heavier parts to be plated without current drop. Adjustable Voltage and Current Fine control for precise layer thickness and reproducible results. Stable Performance for Extended Operation Reliable voltage and current stability Reduces fluctuations during plating for uniform coatings Easy to Operate Clear current and voltage indicators Simple control knobs — no software needed Versatile Use Great not just for plating, but also for: Electrolysis experiments Electrochemical testing Prototyping and DIY projects Technical Specifications (Guideline) Technische DatenBetriebsspannung230 Volt-AC/ 50HzAusgangsspannung3-15 Volt DC regelbar oder 13,8 Volt DC Festspannung durch Festspannungsschalter auf der UnterseiteAusgangsstrom25 A konstant28 A kurzzeitigRestwelligkeit & Rauschen<50mVLoad Regulation<200mVLine Regulation<50mVAnzeigen & Messwerke3 stelliges LED Digital Meter für Spannung und Strom, Zustands Bi-colour LED rot ( Störung ) und grünDC Anschlussbuchsenschraubbare PolklemmenKühlungVentilatorSicherheitSchutz Überlastung, Überhitzung, Kurzschluss- und verpolungssicher, Ausgangsspannungsschutz bei 16,5 VoltExtrasdunkelgraues Gehäuse aus Metall mit Gummistandfüßen, hohe Effizienz > 78% durch PFC (Dynamic Power Factor Correction) >0.95 maximiert den benötigten Strom, Hohe RFI StabilitätAbmessungen(BxHxT)220x110x220 mmGewicht2,7 Kg.Achtung: Nicht geeignet als Ladegerät Use Cases Gold Plating Accurate current control enables smooth, consistent gold deposition. Copper or Nickel Plating High current supports larger parts and thicker layers. Brush & Pen Plating Fine current regulation for localized or small surface work. Lab Experiments Stable output ideal for electrochemical studies and demonstrations. Safety Information Only use in dry, stable installations Do not operate in wet environments Wear protective gloves and eyewear Avoid direct contact with live electrical parts Disconnect before maintenance or cleaning Conclusion The Galvanic Power Supply 25 A is a reliable and precise DC source tailored for electroplating and laboratory use. Its combination of high current capacity, adjustable regulation and stable performance makes it a great choice for hobbyists, professionals, and anyone wanting controlled, repeatable results in electrochemical processes.

25A Electroplating Power Supply – The Perfect Balance Between Performance and Control The 25A electroplating power supply (analog laboratory unit) is the ideal solution for users who need reliable power, precise control, and versatile application options. It offers the perfect balance between entry-level usability and professional performance, making it suitable for both beginners and advanced users. This is the most practical and widely used power class in electroplating. 25 Amps – The Optimal Power Range With up to 25A continuous output (approx. 28A peak), this unit provides: stable plating conditions uniform coating thickness reliable performance even on larger surfaces Perfect for workshops, small production, and professional applications. Precision Control for Perfect Results Voltage range: 3 – 15 V adjustable Optional: 13.8 V fixed output mode Analog display for voltage and current This allows precise control over: coating thickness adhesion quality surface finish A stable power supply is essential for consistent, high-quality plating results. No Size Limitation With this power supply, you can plate: small parts (jewelry, screws) large components (pipes, structures, panels) One system for all sizes and applications. Compatible Plating Methods Pen Plating – precise localized repairs Brush / Tampon Plating – flexible surface coating Bath Plating – uniform production plating Suitable for hobby, professional, and industrial use. Compatible Plating Materials Supports a wide range of electroplating electrolytes: Gold (24K to 9K, white gold, rose gold) Silver Nickel Copper (acid & alkaline systems) Chrome & black chrome Rhodium & black rhodium Palladium, platinum, zinc, tin Fully compatible with modern electroplating systems. Technical Highlights Output current: 25A continuous / ~28A peak Voltage: 3 – 15 V adjustable Power: approx. 375 W Very low ripple (<50 mV) → clean plating results Analog meters for voltage and current Fan-cooled system Robust metal housing Weight: approx. 2.7 kg Safety & Reliability Overload protection Overtemperature protection Short-circuit protection Reverse polarity protection Designed for continuous and reliable operation. Why Choose This 25A Power Supply? Compared to smaller units, 25A offers: higher process stability better results on medium to large surfaces faster deposition rates fewer plating defects The perfect “sweet spot” between entry-level and professional systems. Typical Applications Gold plating jewelry and components Copper and nickel plating Chrome plating automotive parts Restoration and refinishing Industrial and technical coatings Quick Start Guide Connect the workpiece (cathode) Connect the anode Select the electrolyte Adjust voltage and current Start plating and fine-tune as needed Precise control ensures optimal coating performance. Conclusion – The All-Rounder for Electroplating The 25A electroplating power supply is the ideal choice for users who want: professional results flexible application reliable performance It is the most commonly used power level in electroplating, offering the perfect mix of power and control. Buying Argument If you want one device that covers almost everything: 25A is the perfect choice – powerful, precise, and future-proof. Entry level: 10A power supplies Advanced: 25A systems High-performance: 40A and above

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Graphite Electrode Ø 6 mm (BMG‑010) Short Description The Graphite Electrode Ø 6 mm (BMG‑010) is a durable, chemically inert electrode rod made from high‑density fine‑grain graphite. Designed for use as an anode or electrode in electroplating processes, it is ideal for bath, pen, and pad plating applications where a clean, metal‑free current supply is essential.  Product Description This graphite electrode is manufactured from highly compressed fine‑grain graphite, which dissolves only slowly in electrolytes. Unlike metallic anodes, graphite does not shed contaminating metal particles, ensuring cleaner coatings and higher deposit quality.  The 6 mm diameter rod, with an approximate length of 95 mm, fits standard plating fixtures, holders, and pen plating tools, making it easy to integrate into various electroplating setups Typical Applications Electroplating processes (e.g., silver, gold, copper, black nickel, chrome, white bronze) Pen, bath, and pad plating Activation and pre‑treatment steps Counter‑electrode or anode use in a wide range of electrolytes Situations where metal contamination must be avoided Key Benefits Chemically inert: prevents unwanted metal ion contamination in the plating bath. Versatile: compatible with most electroplating chemistries and techniques.  Slow wear: dissolves gradually, extending service life. Affordable: cost‑effective solution for frequent use.  Easy to use: fits common plating holders and pen plating tools. Material & Dimensions Material: High‑density fine‑grain graphite Diameter: 6 mm Length: approx. 95 mm (other lengths may be available)  Practical Tips Ensure electrodes are clean and free of oils before use.  Replace electrodes periodically as they slowly dissolve during electroplating. Graphite’s mild warming effect can help stabilize bath temperature during plating. Conclusion The Graphite Electrode Ø 6 mm is an effective and reliable anode/electrode for a wide range of electroplating applications. Its inert behavior, broad compatibility, and metal‑free current delivery make it a solid choice for hobbyists, workshops, labs, and professional plating operations.

Handle / Anode Holder (BMG‑027) Short Description The Handle / Anode Holder is a universal, ergonomically designed tool for securely and comfortably holding electrodes and anodes in electroplating applications. It is ideal for pen, brush and pad plating, as well as localized plating tasks where precise electrode control is essential. Product Description This handle is engineered to hold a variety of electrodes (e.g., graphite, stainless steel, copper, nickel, platinum) firmly and reliably. With its ergonomic grip, it allows comfortable handling even during extended use without fatigue. The anode holder is compatible with common electrode diameters (e.g., Ø 4 mm, Ø 6 mm) and easily integrates into pen or brush plating setups. Its sturdy construction ensures stable electrical contact and reliable performance, giving you reproducible and high‑quality results. Typical Applications Pen or brush electroplating for localized coatings Pad plating and detailed surface finishing Precision plating on jewelry, contacts, small parts Repair and spot plating Workshop, lab and DIY projects Key Benefits Ergonomic grip: Provides comfortable handling during longer use Universal electrode fit: Compatible with multiple electrode diameters Stable contact: Secure hold and good electrical conductivity Versatile: Fits pen, brush and pad plating techniques Durable construction: High‑quality materials for long service life Usage Instructions Select electrode: Insert and secure an appropriate electrode (e.g., 4 mm or 6 mm) into the holder. Check contact: Ensure the connection is firm with no loose components. Start plating: Use with your plating power supply, maintaining steady control for precise application. Maintenance: Clean after use to remove electrolyte residues and avoid corrosion. Conclusion The Handle / Anode Holder is an essential accessory for any electroplating application requiring precise control and secure electrode handling. Its ergonomic design and flexible compatibility make it a valuable tool for hobbyists, lab users and professional platers alike.

Galvano Pen with 3 Pads (BMG-028) Short Description The Galvano Pen with 3 Pads is a versatile, handheld electroplating tool for targeted plating, repairs, and local finishing. With three interchangeable pads, it is ideal for pen, brush or pad electroplating, enabling precise and uniform metallic coatings on hard-to-reach or detailed areas without using a full plating tank. Product Description The Galvano Pen is an ergonomic device designed for controlled, localized electroplating. Instead of immersing objects in large plating baths, this tool enables direct electrochemical deposition where you need it — saving time, materials and setup effort. The set includes 3 pads of different sizes for maximum flexibility: Small pad: for fine details and spot repairs Medium pad: versatile for most general areas Large pad: for broader surface coverage in one pass Typical Applications Local electroplating (gold, silver, copper, nickel, etc.) Repair of plated surfaces (scratches, worn areas) Detail and accent plating on jewelry or metal parts Prototyping and small batch plating without a bath system Workshops, labs, hobbyists and repair applications Key Benefits Precise application: targeted plating without a full bath Flexible: three pads for different surface sizes Compact & handheld: ideal for small workpieces and tight spots Quick setup: no extensive equipment required Cost effective: reduces chemical usage and setup time Usage Instructions Preparation: Clean and degrease the workpiece; activate surface if needed. Pad selection: Choose the appropriate pad size. Electrolyte application: Apply electrolyte directly to the pad or use suitable sponges/brushes. Plating: Connect plating power supply, set current, and work evenly over the surface. Post-treatment: Rinse with clean water and dry; polishing enhances finish. Conclusion The Galvano Pen with 3 Pads is a practical, flexible tool for anyone who wants precise, high-quality electroplating results without the complexity of full bath systems — ideal for workshops, labs, hobbyists and repair professionals.

The Ideal Introduction to Portable Pen PlatingThis battery-powered pen plating kit is the perfect solution for anyone looking to get started with selective gold plating, silver plating, and other decorative electroplating applications. Its compact design and battery operation allow you to carry out professional electroplating work anywhere—without the need for an external power supply.The kit is ideal for jewelry plating, selective repairs, restoration work, watch components, coins, electrical contacts, electronic parts, and dental applications. It allows precise plating of small areas without immersing the entire workpiece in a plating bath.The battery-powered plating pen operates within a voltage range of 3.0 to 5.0 Volts and is compatible with a wide range of Betzmann Galvanik pen plating solutions.Portable and Ready to Use AnywhereThanks to its battery-powered operation, the pen plating kit is lightweight, portable, and easy to use in workshops, retail stores, repair shops, exhibitions, or on-site service applications. No external rectifier or power supply is required.Important Information About Gold Layer ThicknessThe battery-powered plating pen is designed primarily for decorative plating, touch-up work, repairs, and selective electroplating.Due to its limited output power, it is not intended for depositing gold layers thicker than approximately 2.5 microns (Vermeil standard).If thicker gold deposits or high-volume plating applications are required, we recommend using a professional tank plating system.Crocodile Clip ProtectionThe kit includes a protective cover for the crocodile clip.When the plating pen is not in use, simply place the protector over the crocodile clip. This prevents accidental contact between the clip and the pen electrode, helping to avoid unnecessary battery discharge during storage.Batteries Not IncludedThe plating pen requires three standard AAA batteries, which are not included with the product.Compatible with Numerous Pen Plating SolutionsThe battery-powered plating pen can be used with many Betzmann Galvanik pen plating electrolytes, including solutions for:Gold PlatingSilver PlatingRhodium PlatingBlack Rhodium PlatingPalladium PlatingPlatinum PlatingRuthenium PlatingCopper PlatingNickel PlatingChromium PlatingCobalt PlatingWhen used with suitable alloy or colour plating solutions, the pen can also produce decorative finishes such as rose gold and other gold shades.Please note: The plating pen operates at 3.0–5.0 Volts. Always ensure that the selected pen plating solution is suitable for operation within this voltage range.Suitable ApplicationsIdeal for:Jewelry manufacturingJewelry repairWatchmakingGoldsmithsSilversmithsElectronics repairPCB repairElectrical contactsDental laboratoriesCoin restorationDecorative metal finishingSelective electroplatingRestoration workHobby and professional applicationsImportant NoticeThis battery-powered pen plating kit is designed exclusively for electrically conductive surfaces.Non-conductive materials such as plastic, glass, ceramic, wood, or resin must first be made electrically conductive before they can be electroplated.Quality from Betzmann GalvanikThe Betzmann Galvanik Battery-Powered Pen Plating Kit offers a simple, portable, and professional solution for selective electroplating. Whether for repairs, restoration, jewelry production, or decorative finishing, it provides reliable plating results wherever mobility and precision are required.

Gold Electroplating System BMG‑25A‑100GM – Professional Kit for Gold & Metal Coating Short Description: The BMG‑25A‑100GM is a complete electroplating kit that allows you to coat metallic objects such as jewelry, coins, stainless steel parts, or small components with gold or other metals. Suitable for beginners, professionals, workshops, and educational purposes. What is Electroplating? Electroplating is a process in which metal surfaces are coated using electric current and a chemical solution (electrolyte). Metal ions, such as gold, deposit as a thin, even layer on the surface, creating a high-quality, durable finish. Applications Beginners/Hobbyists: Ready-to-use, including training material. Professionals & Workshops: Robust, adjustable system for various coatings. Industry & Trade: Expandable for different metals and small industrial series. Schools & Training Centers: Ideal for chemistry and technical demonstrations. Coatable metals: Gold (999 fine gold), silver, copper, nickel, chromium, rhodium, palladium, platinum, bronze, zinc, tin. How it Works Prepare the surface: Clean, degrease, and optionally pre-treat. Add electrolyte: Contains metal ions for coating. Apply current: Metal ions deposit onto the surface. Result: Even, high-quality metal coating. Complete Package / Accessories Electroplating Device: 1x Power supply, 2.7–15 V / 25 A, digital display, with power cord Cables & Connections: 1x Positive cable (anode) 1x Negative cable with crocodile clip (cathode/workpiece) 1x Handle with quick-release clamp Electrodes (Anodes): 3x Thick stainless steel electrodes (6 mm) 1x Thin stainless steel electrode (4 mm) 1x Graphite electrode (6 mm) 1x Nickel electrode (6 mm) Pads / Tampons: 6x Fabric pads for tampon electroplating Beakers & Consumables: 6x Large beakers with lids Chemicals / Electrolytes: 500 ml Electrocleaner (for degreasing) 500 ml Chrome remover 500 ml Activator 500 ml Nickel electrolyte 100 ml Gold electrolyte (approx. 1 m² coating area) Documentation & Support: User manual (German/English) Training PDFs Technical support with guidance 24-month warranty Technical Highlights Adjustable voltage and stable current for precise coating Digital display for current and voltage Safety features: Overload, short circuit, and reverse polarity protection Compact, portable, ready to use Efficient power supply with fan Benefits at a Glance For Beginners: Complete kit including training material Technical support included For Professionals: Expandable for multiple metals Suitable for workshop and lab use Cost-effective for small to medium coating projects Important Notes Only for conductive surfaces; a conductive underlayer may be needed Observe safety: gloves, goggles, and ventilation Coating results depend on surface preparation, electrolyte quantity, and object size

Gold Electroplating System L BMG‑25A‑250‑GoldM – Professional Kit for Gold & Metal Coatings Short Description: The BMG‑25A‑250‑GoldM is a complete electroplating kit designed to coat metallic objects such as jewelry, coins, stainless steel parts, handrails, or vehicle components with real gold or other metals. Ideal for beginners, professionals, workshops, and educational purposes. What is Electroplating? Electroplating is a process in which metal ions are deposited onto a conductive surface using electric current and a chemical solution (electrolyte). This creates a thin, even, and durable metal layer. Applications This system can coat metals such as brass, copper, nickel, silver, stainless steel, zinc, tin, or chrome-plated surfaces (with a conductive underlayer). Coatable metals include gold (24K / 999), rose gold, white gold, silver, nickel, copper, chromium, rhodium, palladium, platinum, bronze, and more. Typical uses: Jewelry, watches, coins, handrails, stainless steel railings, vehicle parts, decorative objects, and technical components – portable or stationary. How It Works Prepare the surface: Clean, degrease, and optionally activate. Add electrolyte: The solution contains the metal ions for coating. Apply current: Metal ions deposit on the surface. Result: Even, high-quality metal coating. Complete Package / Accessories 1. Electroplating Device 1x Power supply (25 A), adjustable 2.7–15 V, digital display for current and voltage 2. Cables & Handle 1x Positive cable (anode) 1x Negative cable with crocodile clip (cathode / workpiece) 1x Handle with quick-release clamp 3. Electrodes (Anodes) 3x Thick stainless steel electrodes (6 mm) 1x Thin stainless steel electrode (4 mm) 1x Graphite electrode (6 mm) 1x Nickel electrode (6 mm) 4. Pads / Tampons 8x Fabric pads for tampon electroplating 5. Beakers & Consumables 8x Large beakers with lids 6. Chemicals / Electrolytes 500 ml Electrocleaner – for degreasing 500 ml Chrome remover 500 ml Activator – activates stainless steel and nickel surfaces 250 ml Gold electrolyte (8 g Au/L) – sufficient for approx. 2.5 m² coating area 7. Documentation & Support User manual (German / English) PDF Training PDFs via email Personal technical support, free guidance, 24-month warranty Technical Highlights Adjustable high-power supply with stable voltage and current Digital display for precise monitoring Safety features: Overload, short circuit, reverse polarity, overheat protection Compact, portable, ready to use Benefits For Beginners: Ready-to-use complete kit with training material and support Expandable with additional electrolytes For Professionals & Workshops: Suitable for lab and workshop use Cost-effective for small to medium coating projects Important Notes Conductive surfaces only: Non-conductive materials require a conductive underlayer Safety: Gloves, goggles, and ventilation recommended Coating results: Depend on surface preparation, electrolyte quantity, and object size

Gold Electroplating System XL BMG-25A-500-GoldM – Professional Complete Solution for Gold Plating Short Description: The Gold Electroplating System XL BMG-25A-500-GoldM is a high-capacity professional electroplating kit designed for gold plating large surfaces and complex metal parts. It is suitable for workshops, industrial applications, training environments, and advanced hobby users who require power, flexibility, and reliable results. What Makes This System Special? The XL version is engineered for large-scale and demanding projects. Whether plating handrails, machine components, decorative elements, or technical parts, this system delivers stable performance, precise control, and consistent gold deposition across large areas. Materials & Applications This system is suitable for electroplating conductive materials such as: Steel, iron, zinc, tin Brass, copper, nickel, silver Stainless steel and chrome-plated surfaces Conductive pre-treated plastics Typical applications include jewelry, architectural elements, handrails, railings, automotive parts, tools, coins, mechanical components, and restoration projects. The system can be used mobile or stationary. How Electroplating Works Electroplating uses direct current to deposit metal ions from an electrolyte onto a conductive surface, forming a uniform and durable gold layer. For optimal adhesion and brilliance, copper and nickel intermediate layers are recommended before final gold plating. Scope of Delivery & Included Accessories (Complete Set) 1. Electroplating Power Unit 1× Electroplating power supply – 25 A, adjustable approx. 2.7–15 V DC Digital current and voltage display Heavy-duty metal housing with cooling fan Integrated safety protections: overload, overheating, short circuit, reverse polarity 2. Cables & Holders 3× Positive cables (anode connections) 1× Negative cable with clamp (cathode / workpiece) 3× Hand-held electrode holders with quick-release system 3. Electrodes (Anodes) 4× Stainless steel electrodes (6 mm, heavy-duty) – for degreasing, activating, dechroming, and gold plating 1× Stainless steel electrode (4 mm, fine) – for precision areas 1× Graphite electrode – universal use 1× Nickel electrode (6 mm) – for nickel barrier layers 4. Pads & Containers 10× Fabric pads for brush / tampon electroplating 10× Large containers with lids for electrolytes and pretreatment solutions 5. Chemicals & Electrolytes 1,000 ml Electro Cleaner – for thorough degreasing 1,000 ml Chrome Remover – removes existing chrome layers 1,000 ml Activator – activates stainless steel and nickel surfaces 500 ml Nickel Electrolyte – barrier and intermediate layer 500 ml Alkaline Copper Electrolyte – surface preparation 500 ml Gold Electrolyte (8 g Au/L) – sufficient for approx. 5 m² of plated surface 6. Additional Equipment 3× Plastic work trays – various sizes 1× Safety goggles 1× Spray bottle – for cleaning and pretreatment processes 7. Documentation & Support User manual (German / English, PDF) Training videos and step-by-step guides Free personal technical support and system introduction 12-month manufacturer warranty Unlimited professional consultation Technical Highlights High-performance 25 A DC power supply Precise voltage and current control Reliable cooling for continuous operation Comprehensive electrical safety systems Why Choose the Gold Electroplating System XL? For professionals and workshops: Ideal for large parts and high-volume projects Expandable with additional electrolytes and accessories For industry and training: Robust, stable, and suitable for teaching and demonstrations For advanced hobby users: Complete, ready-to-use system Can be used mobile or stationary Tips for Best Results Surface preparation is critical: polish, clean, and degrease thoroughly Use intermediate layers: copper and nickel improve adhesion and durability Maintain stable electrical parameters for uniform gold thickness Safety Information For conductive surfaces only Wear appropriate protective equipment (gloves, goggles, ventilation) Follow all safety and chemical handling instructions Conclusion The Gold Electroplating System XL BMG-25A-500-GoldM is a powerful, professional all-in-one solution for demanding gold electroplating applications. With extensive accessories, high-performance components, and comprehensive support, it enables reliable, high-quality gold finishes on large and complex metal parts.