Platinum Electrode

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Gold Electrolyte 2 g/L – Gold Plating Solution with Gold Cyanide Complex | No Free CyanideProfessional Gold Electrolyte for Bath, Pen and Tampon PlatingThe Gold Electrolyte 2 g/L is a ready-to-use professional gold plating solution for decorative and technical electroplating applications. It contains 2 g of gold per liter and is suitable for bath plating, tampon plating and pen plating.The gold is present in the electrolyte as a chemically bound gold cyanide complex. No free cyanide is present in the electrolyte.This distinction is important: the product should not technically be described as completely “cyanide-free”, because the gold is present as a cyanide complex. The correct description is “no free cyanide – gold present as a cyanide complex.”The ready-to-use formulation makes this gold electrolyte particularly suitable for jewelry, watches, decorative metal parts, repair plating, restoration and technical applications.Suitable for Multiple Gold Plating ApplicationsThe Gold Electrolyte 2 g/L can be used for:Bath / tank gold platingTampon / brush platingPen platingJewelry and watchesDecorative metal componentsRepair and touch-up platingRestoration and re-platingHobby and workshop applicationsProfessional electroplating applicationsFor bath plating, platinum or graphite anodes can be used depending on the application. A suitable platinum mesh or platinum-plated anode is particularly recommended for professional applications.Gold Cyanide Complex – No Free CyanideThe gold in this electrolyte is present as a cyanide complex.This means:✓ Gold is present as a chemically bound cyanide complex✓ No free cyanide is present✓ 2 g gold per liter✓ Ready-to-use formulation✓ Suitable for professional gold platingThe term “cyanide-free” should therefore not be interpreted as meaning that the electrolyte contains no cyanide-related compounds whatsoever.Despite the absence of free cyanide, this is a chemical electroplating electrolyte and must be handled according to the applicable safety data sheet, product instructions and legal requirements.Advantages✓ 2 g/L gold content✓ Gold present as a cyanide complex✓ No free cyanide✓ Ready to use✓ Suitable for bath, tampon and pen plating✓ Excellent for decorative gold plating✓ Suitable for jewelry and watches✓ Ideal for repair and touch-up plating✓ Suitable for hobby, workshop and professional applications✓ Platinum or graphite anodes can be used✓ Available in different quantities✓ Easy to integrate into existing electroplating equipmentTechnical DataPropertySpecificationProductGold Electrolyte / Gold Plating SolutionGold content2 g/LGold formGold cyanide complexFree cyanideNoneApplicationBath, tampon and pen platingAnodePlatinum or graphiteRecommended bath anodePlatinum mesh / platinum-plated anodeConditionReady to useGold Plating – Professional ResultsCorrect surface preparation is essential for achieving a high-quality gold deposit. The workpiece must be thoroughly cleaned, degreased and properly activated before plating.For bath plating, the workpiece is connected to the negative pole (–) of the DC power supply and functions as the cathode. The anode is connected to the positive pole (+).Uniform positioning of the workpiece and anode helps achieve a consistent current distribution and an even gold deposit.Available to Private and Professional UsersThe Gold Electrolyte 2 g/L is available through the Real Gold Shop / Betzmann Galvanik for hobby users, workshops, small businesses and professional applications.It is therefore an excellent choice for users who want a ready-to-use gold plating electrolyte with 2 g/L gold content and no free cyanide.Order Gold Electrolyte 2 g/L OnlineLooking for a 2 g/L gold plating solution for gold electroplating?This ready-to-use electrolyte is suitable for gold plating jewelry, watches, decorative metal parts, repair plating, restoration and technical applications.Order your Gold Electrolyte 2 g/L from Real Gold Shop and start professional gold plating.

Brass Effect Mixer BMG-065M – Electroplating Additive for Brass-Like Finishes Short Description: The Brass Effect Mixer BMG-065M is a specialized electroplating additive designed to create brass-like color tones when mixed with a gold electrolyte. By adding this mixer to a standard gold solution, the deposited layer takes on the appearance of classic brass, making it ideal for decorative and functional surface finishes. What is the Brass Effect Mixer? The Brass Effect Mixer is a color-modifying additive that is mixed with a gold electrolyte (such as clear gold or gold flash). It alters the color of the deposited metal layer to resemble traditional brass alloys. Depending on the mixing ratio, the resulting shade can range from classic brass to lighter brass tones. What is it used for? Creating brass-like finishes during gold electroplating Mixing with standard gold electrolytes Fine adjustment of color tones for decorative applications Suitable for workshop, laboratory, and small-scale industrial use Application & Mixing Ratio Standard mixture (1:10): Produces a color similar to polished 70/30 brass alloy (approx. 14 K brass appearance). Lighter tone (1.5:10): Higher mixer ratios result in a lighter brass shade. Color tuning: The exact brass tone can be precisely adjusted by varying the mixing ratio. Recommended electrodes: Graphite electrode – reliable and cost-effective Platinum electrode – for very uniform and refined coatings Technical Information Deposition rate: approx. 2.6 µm/min (1:10 ratio, 3 V, graphite electrode) Operating temperature: approx. 20–25 °C Shelf life: up to 6 months under normal storage conditions Hazard information: Product is irritating – follow safety instructions Key Benefits Enables authentic brass-like finishes using a gold electrolyte Flexible color control through adjustable mixing ratios Compatible with commonly used gold plating solutions Ideal for decorative metal finishes and surface restoration Safety Notes Wear protective gloves and safety goggles during use Ensure adequate ventilation Avoid direct skin contact Follow all safety and handling instructions provided with the product documentation Conclusion The Brass Effect Mixer BMG-065M is a professional electroplating additive for producing brass-colored coatings from a gold electrolyte. With simple mixing and precise ratio control, it allows the creation of a wide range of brass tones – from classic polished brass to lighter variations – making it a versatile solution for decorative electroplating applications.

High-Performance Gold Flash Electrolyte for Professional Results The Gold Flash Gold Electrolyte is a premium electroplating solution designed for selective brush plating, swab plating, and bath electroplating processes. It enables fast, uniform, and highly adhesive gold layers on a wide range of metal surfaces. Perfect for jewelry finishing, repairs, technical applications, and decorative coatings, this electrolyte delivers consistent and reliable results from beginner to professional use. Operating Conditions and Deposit Data (Gold Plating Solution) Voltage Range: 4.0 – 6.0 volts Temperature: 14 – 25 °C Gold Concentration: 2 g/l Electrode Material: Platinum or Carbon (see notes) Gold Content in Deposit: 99.9% (balance: carbon) Plating Rate (at 5.0 V, platinum electrode): approx. 0.12 micron per minute (spot plating) Hardness: 180 – 190 HV Deposit Density: 19.3 g/cm³ Internal Stress: low to medium Storage and Shelf Life Storage Conditions: Protect from direct sunlight Shelf Life: Over 3 years Application Notes The use of stainless steel anodes is strongly discouraged for most plating processes. Plating rates are based on a reference area continuously covered by the swab during operation. Application Instructions (Beginner to Professional) 1. Surface Preparation (Critical Step) Thoroughly clean the surface (remove grease, oil, dirt) Activate the surface (acid dip / activator) Rinse with deionized water  Proper preparation ensures maximum adhesion and durability. 2. Brush Plating (Selective Gold Plating) Parameters: Voltage: 4 – 8 V Movement: steady, circular continuous electrical contact Process: Apply electrolyte to plating brush Connect workpiece as cathode (negative pole) Move brush (anode) evenly across surface Maintain constant movement Stop once desired thickness is reached  Ideal for precision work, repairs, and small areas 3. Swab Plating (Controlled Application) Parameters: Voltage: 5 – 10 V Pressure: light to moderate Movement: uniform, overlapping Process: Soak swab with electrolyte Apply evenly across surface Use overlapping strokes Repeat for thicker layers Ideal for medium surfaces and controlled coatings 4. Bath Electroplating (Full Immersion Process) Parameters: Voltage: 2 – 6 V Current density: 0.1 – 1 A/dm² Time: 30 seconds to several minutes Process: Fill plating bath with electrolyte Connect workpiece as cathode Position anode correctly Immerse workpiece Monitor current and time Rinse and dry after plating Ideal for uniform coatings and professional applications Important Process Guidelines Always work on a clean, grease-free surface Avoid interruptions during plating Maintain stable temperature and voltage Prevent contamination of the electrolyte Use proper rinsing between steps Professional Tips Pre-plating (nickel or palladium) improves adhesion Apply multiple thin layers instead of one thick layer Monitor bath composition regularly Increase voltage gradually for optimal deposition Applications Jewelry plating and restoration Decorative gold coating Electrical contacts and precision parts Workshop and industrial use Why This Electrolyte? This gold electrolyte offers maximum control, excellent adhesion, and brilliant gold finish across all plating methods—making it a reliable choice for both beginners and professionals.

Platinum Plating Solution – Ready-to-Use Acid Platinum Electrolyte (2.0 g/L Pt)Professional Platinum Electrolyte for Bright, Corrosion-Resistant Platinum CoatingsThe Platinum Plating Solution is a high-quality, ready-to-use acid platinum electrolyte developed for the deposition of bright, smooth, and highly corrosion-resistant platinum coatings.This professional electrolyte is suitable for both decorative and technical platinum plating applications and enables the production of high-quality platinum layers with excellent chemical stability, durability, and surface appearance. Depending on the process conditions, platinum coatings with a thickness of up to 1.0 µm can be deposited.With a platinum content of 2.0 g/L Pt, this electrolyte provides reliable and reproducible plating results for demanding applications in jewelry, precision engineering, electronics, laboratories, and industrial surface finishing.The deposited platinum layer offers a high purity of 99.9% platinum, providing excellent resistance against corrosion, chemical influences, and wear.ApplicationsThe Platinum Plating Solution is suitable for:Jewelry and luxury componentsWatches and watch partsDecorative metal surfacesTechnical componentsElectrical contactsSensors and precision partsLaboratory equipmentResearch applicationsIndustrial surface finishingFunctional protective coatingsIdeal for:JewelersGoldsmithsElectroplating specialistsManufacturersResearch laboratoriesIndustrial usersProfessional workshopsProduct AdvantagesReady-to-use platinum plating electrolytePlatinum concentration: 2.0 g/L PtBright and shiny platinum coatingsExcellent corrosion resistanceHigh chemical stabilityPlatinum layer purity: 99.9% PtSuitable for decorative and technical applicationsUniform and reproducible platinum depositionProfessional electroplating qualityLong-lasting surface protectionSuitable Base MaterialsThe Platinum Plating Solution can be used for various metallic substrates.Suitable materials may include:Stainless steelTitaniumNickelCopperBrassPrecious metalsGalvanically pre-treated surfacesFor optimum adhesion and coating performance, proper surface preparation is essential. Workpieces should be thoroughly cleaned, degreased, and activated before plating. Depending on the substrate material, an appropriate intermediate layer may be required.Technical SpecificationsProduct TypeAcid Platinum Plating Solution / Platinum ElectrolytePlatinum Content2.0 g/L PtpH Value< 1Density1.08 g/ml (increasing)Recommended Operating ConditionsParameterValueVoltage2 VBath Temperature30–40 °CPlating Time2–4 minutesAnode MaterialPlatinized Titanium, MOX, Carbon Anode/Cathode Surface RatioApprox. 1:1Workpiece MovementRequiredCurrent DensityApprox. 0.5–1.5 A/dm²Deposition RateApprox. 11 mg/AminBath FiltrationRecommended from 10 litersPlatinum Deposit PropertiesThe deposited platinum coating provides:Bright and attractive surface finishExcellent corrosion resistanceHigh chemical resistanceOutstanding durabilityHigh platinum purityDeposit Data:Hardness: Not measurable, approx. 500 HVMaximum coating thickness: Up to 1.0 µmPlatinum purity: 99.9%Processing InformationHigh-quality platinum plating requires careful surface preparation. Before electroplating, all parts must be thoroughly cleaned, degreased, and activated to ensure excellent adhesion and uniform coating quality.Maintaining the recommended operating parameters, including voltage, temperature, current density, and plating time, is essential for achieving consistent platinum deposition.Variations from the recommended process conditions may affect the brightness, structure, and properties of the deposited platinum coating.Delivery FormReady-to-use Platinum Plating SolutionPlatinum concentration: 2.0 g/L PtQuality from Betzmann GalvanikBetzmann Galvanik provides professional solutions for electroplating and advanced surface finishing applications. Our electrolytes are developed for demanding users in jewelry manufacturing, industry, laboratories, and technical applications.With a focus on quality, reliability, and process stability, Betzmann Galvanik supplies high-performance electroplating solutions designed for consistent and professional results.Choose Betzmann Galvanik for reliable platinum plating technology and premium surface finishing solutions.

Product Information "Screw Jar 250 ml Transparent"250 ml plastic screw jar made of transparent polypropylene (PP) with a standard white screw cap made of polyethylene (PE).The transparent plastic jar is particularly suitable for storing ointments, pastes, powders, or free-flowing substances.250 ml Plastic Jar / Transparent Screw JarSpecificationDetailsNominal volume                                       250 mlDiameter                                        80 mmHeight incl. lid                                        58 mmMaximum label height                                        36 mmJar material                                        PolypropyleneLid material                                        PolyethyleneAppearance                                        TransparentClosure                                         Standard whiteApplication                                         Ointments, creams, powders, free-flowing substancesOther names                                         Plastic jar, screw jar, universal jar

Gold Electrolyte 2 g/L – Gold Plating Solution with Gold Cyanide Complex | No Free CyanideProfessional Gold Electrolyte for Bath, Pen and Tampon PlatingThe Gold Electrolyte 2 g/L is a ready-to-use professional gold plating solution for decorative and technical electroplating applications. It contains 2 g of gold per liter and is suitable for bath plating, tampon plating and pen plating.The gold is present in the electrolyte as a chemically bound gold cyanide complex. No free cyanide is present in the electrolyte.This distinction is important: the product should not technically be described as completely “cyanide-free”, because the gold is present as a cyanide complex. The correct description is “no free cyanide – gold present as a cyanide complex.”The ready-to-use formulation makes this gold electrolyte particularly suitable for jewelry, watches, decorative metal parts, repair plating, restoration and technical applications.Suitable for Multiple Gold Plating ApplicationsThe Gold Electrolyte 2 g/L can be used for:Bath / tank gold platingTampon / brush platingPen platingJewelry and watchesDecorative metal componentsRepair and touch-up platingRestoration and re-platingHobby and workshop applicationsProfessional electroplating applicationsFor bath plating, platinum or graphite anodes can be used depending on the application. A suitable platinum mesh or platinum-plated anode is particularly recommended for professional applications.Gold Cyanide Complex – No Free CyanideThe gold in this electrolyte is present as a cyanide complex.This means:✓ Gold is present as a chemically bound cyanide complex✓ No free cyanide is present✓ 2 g gold per liter✓ Ready-to-use formulation✓ Suitable for professional gold platingThe term “cyanide-free” should therefore not be interpreted as meaning that the electrolyte contains no cyanide-related compounds whatsoever.Despite the absence of free cyanide, this is a chemical electroplating electrolyte and must be handled according to the applicable safety data sheet, product instructions and legal requirements.Advantages✓ 2 g/L gold content✓ Gold present as a cyanide complex✓ No free cyanide✓ Ready to use✓ Suitable for bath, tampon and pen plating✓ Excellent for decorative gold plating✓ Suitable for jewelry and watches✓ Ideal for repair and touch-up plating✓ Suitable for hobby, workshop and professional applications✓ Platinum or graphite anodes can be used✓ Available in different quantities✓ Easy to integrate into existing electroplating equipmentTechnical DataPropertySpecificationProductGold Electrolyte / Gold Plating SolutionGold content2 g/LGold formGold cyanide complexFree cyanideNoneApplicationBath, tampon and pen platingAnodePlatinum or graphiteRecommended bath anodePlatinum mesh / platinum-plated anodeConditionReady to useGold Plating – Professional ResultsCorrect surface preparation is essential for achieving a high-quality gold deposit. The workpiece must be thoroughly cleaned, degreased and properly activated before plating.For bath plating, the workpiece is connected to the negative pole (–) of the DC power supply and functions as the cathode. The anode is connected to the positive pole (+).Uniform positioning of the workpiece and anode helps achieve a consistent current distribution and an even gold deposit.Available to Private and Professional UsersThe Gold Electrolyte 2 g/L is available through the Real Gold Shop / Betzmann Galvanik for hobby users, workshops, small businesses and professional applications.It is therefore an excellent choice for users who want a ready-to-use gold plating electrolyte with 2 g/L gold content and no free cyanide.Order Gold Electrolyte 2 g/L OnlineLooking for a 2 g/L gold plating solution for gold electroplating?This ready-to-use electrolyte is suitable for gold plating jewelry, watches, decorative metal parts, repair plating, restoration and technical applications.Order your Gold Electrolyte 2 g/L from Real Gold Shop and start professional gold plating.

X‑Gold / Goldstrike 4 g/L Electrolyte (BMG‑087.2) High‑Adhesion Gold Strike Plating Solution for Difficult Surfaces Short Description The X‑Gold / Goldstrike 4 g/L Electrolyte (BMG‑087.2) is a specialized gold plating solution with 4 grams of gold per liter designed to deposit thin, highly adherent gold layers. It is especially effective on challenging substrates such as chrome, stainless steels, and dental alloys, and it is ideal as a strike or adhesion layer before applying thicker gold or other metal coatings.  Applications This gold strike electrolyte is suitable for: Thin adhesion gold layers on difficult‑to‑plate metals Base layers for thicker gold or precious metal coatings Decorative accents and conductive finishes Brush, tank, or pen plating applications Preparing surfaces so that subsequent plating achieves better adherence and finish  How It Works (Simple Explanation) During electroplating, gold ions are reduced onto the workpiece surface under DC. This specific electrolyte is formulated to promote strong adhesion, even on substrates that are normally hard to coat: Prepare: Clean and degrease the surface thoroughly. Plating: Connect the workpiece as the cathode and apply voltage. Deposit: A thin, adherent gold layer forms. Continue: Use this layer as a base for thicker coatings or other metals.  Benefits of X‑Gold / Goldstrike 4 g/L Electrolyte Excellent adhesion on chrome, stainless steels, and challenging alloys  Adequate gold concentration for effective strike layers  Uniform and reliable plating at moderate voltages  Useful base for further electroplating steps Suitable for hobby, workshop, and professional uses Typical Parameters (Guidelines) PropertyValue / RangeElectrolyte typeAdhesion gold strike solutionGold content4 g/LVoltage~3–4 VTemperature20–25 °CAnode materialCarbon or platinumDeposition rate~0.07–0.09 µm/min (spot)Recommended thickness~0.1 µmGold purity in deposit~99–99.5 %Hardness~185 HVDensity~19.3 g/cm³pH~1.0Values are practical guidelines and may vary with conditions.  Application Tips Preparation: Clean and degrease surfaces thoroughly. Plating: Operate within recommended voltage and temperature ranges. Use carbon or platinum electrodes for best results. Post‑Treatment: Rinse with clean water and dry. Can be a base for thicker gold or other precious coatings. Safety Information Wear protective gloves, goggles, and suitable clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose according to local chemical waste regulations Contains substances classified as hazardous with irritation and environmental effects. Conclusion The X‑Gold / Goldstrike 4 g/L Electrolyte delivers thin, strong‑adhering gold layers that are especially effective on surfaces that are difficult to plate with standard solutions. Its reliable performance makes it an excellent choice as a strike layer or base for further electroplating processes. 

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

K-Gold - Clear Gold Electroplating Solution – for Pen, Bath & Swab Plating (10 g) Professional cyanide-free gold electrolyte for selective and immersion plating The K-Gold electroplating solution is a premium, cyanide-free gold electrolyte designed for pen plating, swab (tampon) plating and bath electroplating. It is ideal for jewellery finishing, repair plating, precision components and controlled gold deposition on small parts. The solution deposits a high-purity gold layer (up to 24 K) with excellent adhesion and uniform thickness. It can be used pure or blended with coloured gold additives to achieve specific karat values and gold shades. Key Features & Benefits High-purity gold electrolyte (≈ 10 g Au/L equivalent) Cyanide-free formulation for safer professional use Suitable for three plating methods: – Pen plating – Swab / tampon plating – Bath (immersion) plating Excellent adhesion on nickel, copper, silver and brass (proper pretreatment required) Soft, burnishable gold deposit with high visual quality Technical Parameters Gold concentration: approx. 10 g/L equivalent Deposit purity: 99.9–100 % gold Operating voltage: – Pen / swab plating: from 3.5 V – Bath plating:  3 V (current-controlled recommended) begin with 0,1 Ampere pro cm2 Temperature: 20–25 °C Recommended anode: Carbon or platinised titanium (bath) Hardness: approx. 170–180 HV Density: approx. 19.0 g/cm³ Pen Plating Application Ideal for localised plating, repairs and touch-ups. Clean, degrease and activate surface Load plating pen or swab with K-Gold solution Apply 2–3.5 V Move evenly across the surface to build the layer Swab / Tampon Plating Application Best for controlled selective plating on larger areas. Soak swab with electrolyte Maintain gentle, even contact Keep voltage stable Repeat passes to achieve desired thickness Bath Plating Application For uniform full-surface gold plating of small components. Thorough surface preparation Fill plating bath with K-Gold solution Use carbon or platinised titanium anode Apply low current density at 2–4 V Rinse and dry after plating Notes Air-sensitive – reseal container immediately after use Can be mixed with gold colour additives for karat matching Suitable for decorative and functional gold coatings

Smoky Chrome / Black Chrome Plating Solution BMG-108.3 – Dark Metallic Chrome FinishProfessional Smoky Chrome Electrolyte for Black Chrome PlatingThe Smoky Chrome / Black Chrome Plating Solution BMG-108.3 from Betzmann Galvanik is a professional electroplating electrolyte designed to produce a dark, metallic chrome finish.Depending on the substrate, surface preparation and plating parameters, the resulting finish can range from dark grey and anthracite to a deep smoky black metallic appearance.Smoky Chrome is particularly suitable for applications where a high-quality dark metallic finish is required and can provide an interesting alternative to conventional black rhodium or black ruthenium finishes.Typical applications include jewellery, watches, automotive parts, design objects, electronics housings, fittings and high-quality metal components.What Is Smoky Chrome / Black Chrome?Smoky Chrome is a galvanically deposited dark chrome coating with a metallic appearance.The final colour and gloss level depend strongly on the surface preparation and the underlying coating.Depending on the process, the appearance can range from:Dark Grey → Anthracite → Smoky Black → Deep BlackThe best results are generally achieved on smooth, polished nickel, copper or gold surfaces and other suitable conductive substrates.Because the coating is very thin, it follows the existing surface structure very closely.The better the underlying surface is polished and prepared, the better the final Smoky Chrome finish will look.Ideal for Jewellery, Watches, Automotive Parts and Design ObjectsSmoky Chrome is particularly attractive wherever a premium dark metallic appearance is required.Typical applications include:Jewellery and jewellery componentsWatches and watch componentsAutomotive trimAutomotive componentsDoor handles and fittingsBathroom fittings and accessoriesElectronics housingsMobile phone housingsLuxury and design productsMetal accessoriesDecorative metal objectsModel makingSpecial componentsRestorationHigh-quality metal partsThe coating is especially interesting for frequently handled components where a hard, durable and visually distinctive surface is desired.Smoky Chrome as an Alternative to Black Rhodium and Black RutheniumWhen a dark metallic finish is required, black rhodium and black ruthenium are commonly considered.Smoky Chrome provides another option:Dark to black metallic appearanceCharacteristic chrome finishHigh surface hardnessVery thin electroplated coatingSuitable for decorative applicationsMetallic rather than painted appearanceThis makes Smoky Chrome particularly attractive for customers looking for a premium black metallic surface.Suitable Substrates and UndercoatsThe final appearance and quality of the black chrome coating depend heavily on the underlying surface.Suitable substrates or intermediate coatings can include:Nickel coatingsCopper coatingsGold coatingsGold flash coatingsOther suitable conductive surfacesFor a high-quality decorative finish, a smooth, polished nickel or gold intermediate layer is recommended.For example, brass components can first be provided with a suitable nickel or white bronze intermediate layer before applying the Smoky Chrome coating.Perfect Surface = Perfect Smoky Chrome FinishSmoky Chrome is not a coating designed to hide poor surface preparation.Quite the opposite:The coating reproduces the underlying surface structure very clearly.We therefore recommend the following preparation:Mechanically finish and polish the surfaceCompletely remove polishing residuesThoroughly degrease the workpieceActivate the surfaceRinse thoroughlyApply the Smoky Chrome coating without unnecessary delayGrease, oxides and other contamination can significantly affect the quality and adhesion of the coating.Activation Before Smoky Chrome PlatingThorough activation is particularly important for sensitive or noble-metal substrates.For suitable gold surfaces, for example, activation with 10% sulfuric acid can be used. The Betzmann Galvanik Smoky Chrome instructions specify activation of gold surfaces with 10% sulfuric acid for approximately 1–2 minutes, followed by thorough rinsing.The exact pretreatment must always be adapted to the particular base material and existing intermediate coating.Suitable for Bath, Pen and Tampon PlatingThe Smoky Chrome BMG-108.3 electrolyte can be used for different electroplating techniques, depending on the equipment and application.Bath PlatingIdeal for:JewelleryFittingsAutomotive componentsDesign objectsMultiple workpiecesPen PlatingParticularly useful for:Repair platingLocalised coatingCorrectionsSmall areasDifficult-to-reach areasTampon PlatingParticularly suitable for:Local repairsPartial surfacesLarge individual componentsMobile electroplatingOn-site finishing and repair workRecommended ElectrodeFor the Smoky Chrome process, we recommend:✔ Carbon / Graphite✔ PlatinumCarbon or graphite electrodes are an economical and practical solution for everyday applications.Platinum electrodes offer excellent chemical resistance and can be used at the upper end of the recommended voltage range.Stainless steel anodes are not recommended for this process.Technical Specifications – Smoky Chrome BMG-108.3PropertySpecificationProductSmoky Chrome / Black ChromeArticle NumberBMG-108.3ProcessElectroplated Black ChromeVoltage9–11 VTypical voltage with carbonapprox. 10 VVoltage with platinumup to approx. 11 VTemperature20–30 °CRecommended electrodeCarbon/Graphite or PlatinumBrightness L*approx. 65–70%Chromium content of coatingapprox. 99%Remaining componentCarbonDeposition rate at 10 V / graphiteapprox. 2 µm/min (point plating)Maximum coating thicknessapprox. 3 µmHardness as depositedapprox. 800 HVHardness after heat treatmentapprox. 1,500–1,600 HVCoating densityapprox. 7.2 g/cm³Storage lifeapprox. 1–2 yearsHigh-Hardness Black Chrome CoatingOne of the key advantages of the Smoky Chrome system is the high hardness of the deposited coating.The freshly deposited coating reaches approximately:800 HVWith suitable heat treatment at approximately 220 °C, the hardness can increase to approximately:1,500–1,600 HVThis makes Smoky Chrome particularly interesting for decorative components that are regularly handled or exposed to mechanical wear.Thin, High-Quality CoatingThe black chrome coating is very thin, with a maximum thickness of approximately 3 µm.With point plating at 10 V using a carbon/graphite electrode, a deposition rate of approximately 2 µm per minute can be achieved.Actual plating time depends on the workpiece, current distribution, electrode movement, surface condition and plating method.Operating Temperature and VoltageThe recommended operating temperature is approximately:20–30 °CThe typical operating voltage range is:9–11 VWith a carbon/graphite electrode, approximately 10 V is typically used.When using a platinum electrode, the voltage can be increased to approximately 11 V.Optional Heat TreatmentHeat treatment is optional and is not necessary for every application.Where increased mechanical hardness is required, the finished Smoky Chrome coating can be heat-treated at approximately:220 °CThis can increase the hardness from approximately 800 HV to 1,500–1,600 HV.Smoky Chrome – Premium Black Metallic FinishUnlike paint or powder coating, Smoky Chrome produces a true electroplated metallic surface.The result can provide:✔ Dark grey to deep black appearance✔ Metallic finish✔ Premium anthracite appearance✔ Very thin coating✔ High hardness✔ Excellent decorative appearance✔ Suitable for frequently handled componentsImportant: Decorative Final CoatingSmoky Chrome is primarily intended as a decorative final coating.It should therefore not be marketed as a standalone corrosion-protection system. Corrosion resistance depends on the substrate, intermediate layers, coating quality, thickness and the complete coating system.For high-quality decorative applications, the correct undercoat and surface preparation are therefore essential.Safety InformationElectroplating chemicals must be handled using appropriate safety precautions.When working with the electrolyte:Wear suitable protective glovesWear safety glasses or face protectionUse suitable protective clothingAvoid skin and eye contactEnsure adequate ventilationDo not inhale aerosols, mist or vapoursRead the current Safety Data Sheet before useDispose of electrolyte residues according to applicable regulationsAlways follow the current product label and Safety Data Sheet.Betzmann Galvanik – Professional Smoky Chrome PlatingWith the Smoky Chrome / Black Chrome Electrolyte BMG-108.3, Betzmann Galvanik provides a professional solution for users looking to create a premium dark, metallic chrome finish.Whether for jewellery, watches, automotive components, design objects, electronics, fittings or special metal parts, Smoky Chrome opens up numerous possibilities for creating a distinctive black metallic appearance.Product Advantages at a Glance✔ Dark to deep-black metallic finish✔ Premium anthracite / Smoky Chrome appearance✔ Suitable for bath, pen and tampon plating✔ Carbon/graphite or platinum electrode✔ 9–11 V operating range✔ 20–30 °C operating temperature✔ Approx. 800 HV as deposited✔ Up to approx. 1,500–1,600 HV after heat treatment✔ Very thin coating up to approx. 3 µm✔ Ideal for jewellery, watches, automotive, electronics and design✔ Professional electroplating quality from Betzmann GalvanikBetzmann Galvanik – professional electrolytes, electroplating equipment, electrodes and accessories for high-quality surface finishing.

Gold Electrolyte 8 g/L – 24K Hard Gold PlatingProfessional gold plating electrolyte containing 8 g of gold per liter for high-quality 24K gold deposits – suitable for tank plating, pen plating and tampon plating.This high-quality Gold Electrolyte 8 g/L is designed for producing uniform, durable and visually attractive 24-karat gold coatings. It can be used for conventional tank electroplating as well as for selective gold plating with a plating pen or tampon system.Ideal for jewelry, watches, metal components, restoration, repair work, model making, prototypes, individual pieces and professional surface finishing.Key Benefits8 g gold per liter24K gold / 99.9% goldSuitable for tank electroplatingSuitable for pen plating / brush platingSuitable for tampon plating / selective electroplatingHigh deposition performanceProduces uniform, high-quality gold depositsSuitable for professional applications and repair workAvailable in different container sizesTechnical support directly from Betzmann GalvanikTechnical DataParameterSpecificationGold content8 g/LGold purity99.9%Gold quality24KWorking voltageapprox. 3–5 VRecommended temperatureapprox. 14–25 °CDeposition rateapprox. 0.5 µm/min at 3.5 VMaximum recommended thicknessup to approx. 5 µmHardnessapprox. 220–230 HVSuitable anodePlatinum or carbonPlease note: Actual deposition rate and achievable coating thickness depend on the substrate, surface preparation, current density, temperature, electrolyte movement and plating time.Suitable for Tank, Pen and Tampon PlatingThis electrolyte offers excellent versatility for different gold-plating applications.With tank electroplating, complete components or assemblies can be coated with a uniform gold layer.For repairs, partial areas and difficult-to-reach surfaces, pen plating and tampon plating are particularly useful. These methods allow gold to be deposited selectively exactly where it is required, without immersing the entire component in a plating bath.Typical applications include:Gold plating repairsSelective gold platingJewelry and watchesElectrical contact areasMetal fittings and componentsIndividual partsRestoration workDecorative surface finishingPrototyping and small-batch productionCorrect Surface Preparation Is EssentialA high-quality gold coating always starts with proper surface preparation.The substrate must be thoroughly cleaned, degreased and properly activated before plating. Depending on the base material, an appropriate intermediate layer may also be required.Different substrates such as copper, brass, silver, stainless steel, steel, zinc alloys and aluminum require different preparation and activation procedures.For demanding applications, we recommend selecting the complete plating sequence according to the specific substrate and intended use.High-Quality 24K Gold DepositsWith an 8 g/L gold concentration, 24K gold and a hardness of approximately 220–230 HV, this electrolyte is suitable for producing attractive and relatively wear-resistant gold coatings.Depending on the application, thin decorative coatings or thicker functional gold layers can be deposited. For components exposed to mechanical wear, sufficient coating thickness is essential.Professional Gold Plating for Industry, Workshops and Individual ApplicationsWhether you are looking for a solution for complete tank plating or precise repair and selective plating with a pen or tampon, this 8 g/L Gold Electrolyte provides a versatile solution for professional gold plating applications.Betzmann Galvanik provides technical advice on electrolyte selection, surface preparation and the appropriate electroplating process for your application.Order Gold Electrolyte 8 g/LProfessional 24K Gold Electrolyte for tank plating, pen plating and tampon plating – ideal for gold plating, repair work, restoration and high-quality surface finishing.If you are unsure which preparation or intermediate layer is required for your particular substrate, please contact us for technical advice.

White Bronze Electrolyte – Bright Bronze Plating as a Nickel Alternative Bright, Hard and Durable White Bronze Electroplating The White Bronze Electrolyte SW10011.1 from Betzmann Galvanik enables the electroplating of a bright, silvery-white bronze alloy onto suitable electrically conductive metal surfaces. White bronze is particularly suitable as a nickel-free alternative to conventional nickel plating when a bright, hard and wear-resistant surface is required. It can also be used as an intermediate or barrier layer between copper/bronze and a subsequent gold plating. The electrolyte is prepared by mixing the White Bronze component with an alkaline copper electrolyte in a 1:1 ratio. Your Advantages at a Glance Bright, silvery white bronze finish Nickel-free alternative to conventional nickel plating Very fast deposition High deposition rate High hardness Good corrosion resistance Good abrasion and wear resistance Antimicrobial properties Excellent as an intermediate layer before gold plating Suitable for decorative and functional applications Suitable for tank plating and pen/brush plating Suitable for various conductive metal surfaces What Is White Bronze? White bronze is an electroplated bronze alloy with a bright, silvery-metallic appearance. The resulting surface can visually resemble a light nickel coating while offering the advantage of being nickel-free. White bronze is therefore particularly interesting for applications where a bright nickel-free surface is required, including decorative metal components, jewellery and other suitable applications. Preparing the White Bronze Electrolyte The White Bronze electrolyte is prepared by combining the White Bronze component with a suitable alkaline copper electrolyte. Mixing Ratio 1 part White Bronze component : 1 part alkaline copper electrolyte Mix both components thoroughly before use. Important: This product is not a conventional ready-to-use copper electrolyte. It is used together with a suitable alkaline copper electrolyte to produce the White Bronze plating bath. How to Apply White Bronze Electroplating Prepare the electrolyte Mix the White Bronze component and alkaline copper electrolyte in a 1:1 ratio. Prepare the workpiece Thoroughly clean, degrease and activate the surface according to the base material. Electrical connection Connect the workpiece as the cathode (negative pole). Electroplating Apply the appropriate DC current to deposit the White Bronze alloy. Rinsing Thoroughly rinse the workpiece after plating and dry it carefully. Applications White bronze can be used for a wide range of decorative and technical applications. Particularly suitable for: Jewellery Decorative metal components Accessories Metal fittings Technical components Restoration Repair plating Intermediate and barrier layers Underlayers before gold plating Applications where nickel should be avoided White Bronze as a Nickel Alternative One of the key applications is the use of white bronze as a nickel alternative. The deposited layer provides a bright metallic appearance combined with high hardness and good wear resistance, making it an interesting alternative where a bright nickel-like appearance is desired without depositing nickel. For jewellery and suitable objects that come into contact with skin, a nickel-free coating can be advantageous. White Bronze as an Intermediate Layer Before Gold White bronze can also be used as an intermediate or barrier layer between copper/bronze and gold. A typical coating structure can be: Base Material → Copper → White Bronze → Gold The White Bronze layer provides a functional intermediate layer while also creating a bright and attractive surface beneath the final gold coating. Recommended Electrodes For electroplating, graphite or platinum anodes are recommended. Technical Specifications PropertySpecificationProductWhite Bronze ElectrolyteProduct numberSW10011.1Mixing ratio1:1 with alkaline copper electrolyteVoltage3.2–3.5 VMinimum voltageapprox. 3 VOperating temperature18–25 °COptimum temperatureapprox. 22 °CAnodesGraphite or platinumCoating colourBright bronze / silvery bronzeTypical hardness450–500 HVDeposit densityapprox. 8.6–8.8 g/cm³Typical alloy compositionapprox. 42% copper / 58% tinDeposition rateapprox. 0.7–1.5 µm/min, depending on process parametersApplicationTank plating, brush/pen plating The values above are guideline values and may vary depending on the workpiece, electrolyte preparation, current density, agitation and other process parameters. Storage The White Bronze electrolyte and prepared solution are sensitive to air exposure. Therefore: Keep the container tightly closed Minimize unnecessary exposure to air Store in a cool place For the prepared solution, storage at approximately 2–5 °C is recommended Shelf life of the prepared solution under suitable storage conditions: approximately 4 weeks Important Tips for Optimal Results Thorough surface preparation is essential for a high-quality White Bronze coating. The workpiece should generally be: Cleaned → Degreased → Activated → Electroplated During electroplating, uniform movement of the electrolyte can help achieve a more homogeneous deposit. Safety Information When working with electroplating electrolytes, always: Wear suitable protective gloves Wear safety goggles Wear appropriate protective clothing Avoid skin and eye contact Work only in well-ventilated areas Do not ingest Keep out of reach of children Dispose of chemical residues and spent electrolytes according to applicable regulations Always consult the current Safety Data Sheet (SDS) before use. Conclusion The White Bronze Electrolyte SW10011.1 is a versatile solution for producing bright, hard and wear-resistant White Bronze coatings. It is particularly interesting as a nickel-free alternative to nickel, for decorative and functional applications and as an intermediate/barrier layer between copper or bronze and gold. When combined with a suitable alkaline copper electrolyte in a 1:1 mixing ratio, it provides an effective system for fast White Bronze electroplating.

White Bronze Electrolyte SW10011.1 Fast plating electrolyte for bright white bronze coatings as an alternative to nickel Short Description The White Bronze Electrolyte SW10011.1 is a brush or bath electroplating solution for depositing a bright white bronze alloy on conductive metal surfaces. When used, it produces an antimicrobial white bronze layer that can replace traditional nickel plating, replicating similar hardness and color while avoiding nickel allergy issues. Real Gold Applications This bronze plating electrolyte is used to: Apply bright white bronze coatings on a variety of metals Replace nickel plating where nickel avoidance is desired Provide corrosion-resistant and antimicrobial layers Act as a barrier layer between copper/brass and gold Create decorative or functional coatings in brush or bath plating Real Gold How It Works (Simple Explanation) White bronze plating is achieved by mixing this electrolyte with an alkaline copper plating solution (1:1) and applying direct current. The bronze alloy deposits as a uniform, bright metallic layer. Real Gold Benefits High deposition rates and efficient operation Nickel-free alternative with similar physical properties Antimicrobial and corrosion-resistant surface Functions as a barrier layer before gold plating Decorative and functional surface finish Compatible with brush and bath plating Real Gold Typical Parameters PropertyValue / RangeElectrolyte typeWhite bronze plating solutionMixing ratio1 part alkaline copper : 1 part White BronzeVoltage3.2–3.5 VTemperature18–25 °C (optimum ~22 °C)ElectrodeGraphite/platinumTypical alloy~42 % Cu / 58 % SnHardness450–500 HVDensity of deposit8.6–8.8 g/cm³Plating rate0.7–1.5 µm/minShelf life~4 weeks if stored correctlyStorage2–5 °C recommendedAir sensitiveYes — keep sealed Safety Information Follow all standard electroplating safety practices: Wear protective gloves, goggles, and clothing Avoid contact with skin and eyes Use in well-ventilated areas Keep out of reach of children Dispose of wastes per local regulations Conclusion The White Bronze Electrolyte SW10011.1 is a versatile plating solution that produces bright, antimicrobial white bronze coatings with mechanical and aesthetic properties close to nickel plating. It is especially useful where nickel use is restricted or undesirable, and as a barrier layer prior to gold plating in both decorative and functional applications.

Thick Multi-Layer Anode Pad – Maximum Durability for Demanding Electroplating The thick multi-layer anode pad is a highly durable and robust tampon (anode sleeve) designed for professional use in pen plating and brush (tampon) plating applications. Its reinforced multi-layer construction provides significantly longer service life compared to standard pads while ensuring consistent and uniform electrolyte transfer during the plating process. This makes it the ideal solution for demanding applications, rough surfaces, and intensive use conditions. Key Benefits Multi-layer construction for maximum durability Ideal for rough, uneven, or structured surfaces Significantly reduced wear compared to soft pads Uniform electrolyte distribution for consistent coatings Compatible with a wide range of plating solutions Cost-efficient due to extended lifespan Applications Pen plating (localized electroplating) Brush / tampon plating Repair and touch-up work Technical and functional coatings Processing of rough or heavily used surfaces This anode pad is the preferred choice when standard pads wear out quickly or fail to provide consistent results. Technical Specifications Design: thick, multi-layer stitched construction Structure: reinforced fabric layers for high stability Absorption: high electrolyte retention capacity Use: universal for electroplating applications Scope of delivery: 1 piece Compatibility Suitable for anode rods up to approx. 6 mm diameter Expandable up to approx. 8 mm if adjusted Dual insertion openings for extended usability Compatible with: Graphite anodes Platinum anodes Standard plating pens Process Advantages Even electrolyte and current distribution Reduced streaking and uneven coatings Better control on difficult surfaces Longer operating time → fewer replacements Increased efficiency in demanding applications Function in the Plating Process The anode pad acts as an electrolyte carrier and contact medium between the anode and the workpiece. It directly affects: Coating uniformity Surface quality Process stability A high-quality multi-layer pad ensures consistent, professional results even under heavy use. Application Note Pre-soak thoroughly with electrolyte before use to ensure conductivity Inspect regularly and replace when worn Conclusion – The Professional Choice for Heavy-Duty Applications The thick multi-layer anode pad is the ideal solution for professionals working under demanding electroplating conditions. It delivers: Maximum durability Reliable coating quality Improved process efficiency A small component with a major impact on plating performance and consistency.

X‑Gold Strong / Goldstrike 6 g/L Electrolyte (BMG‑086) High‑Adhesion Gold Strike Plating Solution for Challenging Surfaces Short Description The X‑Gold Strong / Goldstrike 6 g/L Electrolyte (BMG‑086) is a specialized gold plating solution designed to deposit thin, highly adhesive gold layers with a gold content of approximately 6 g per liter. It is formulated to provide excellent adhesion even on difficult‑to‑plate substrates, making it an ideal base layer for subsequent gold or other precious metal coatings. Applications This gold strike electrolyte is suited for: Adhesion gold layers on challenging substrates such as chrome, stainless steel, and dental alloys Base strike layers before thicker gold or decorative coatings Decorative accents and functional surfaces Contact and conductor finishes requiring strong adhesion Applications demanding uniform adhesion and surface coverage How It Works (Simple Explanation) Gold plating uses an electrical current to reduce gold ions from the electrolyte onto the workpiece. This specific formulation promotes strong adhesion, even on materials that are typically difficult to plate: Preparation: Clean and degrease the surface thoroughly Plating: Connect the workpiece as the cathode and apply voltage Deposition: A thin, strongly adherent gold layer forms Further treatment: This base can support thicker or decorative coatings Benefits of X‑Gold Strong / Goldstrike 6 g/L Electrolyte High adhesion on demanding materials Consistent and reliable gold deposition Excellent base layer for subsequent plating Even layer distribution with minimal defects Suitable for bath, pen, and brush plating Useful for decorative and functional applications Technical Parameters (Guideline Values) PropertyValue / RangeElectrolyte typeAdhesion gold/strike solutionGold content6 g/LRecommended voltageapprox. 3–4 VOperating temperature20–25 °CAnode materialPlatinum or carbonDeposition rateapprox. 0.08–0.10 µm/minRecommended layer thickness0.1–0.3 µmDeposit purity~99.5 % goldHardness~180 HV These values are practical guidelines. Results may vary based on equipment, current, temperature, and other factors. Application Tips Preparation: Clean and degrease surfaces thoroughly for optimal adhesion. Plating: Operate within recommended voltage and temperature ranges. Gentle agitation of the solution promotes uniform deposition. Post‑Treatment: Rinse plated parts with clean water and dry. Light polishing can enhance luster if desired. Safety Information Wear protective gloves, eye protection, and suitable clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose of chemical waste according to local regulations Conclusion The X‑Gold Strong / Goldstrike 6 g/L Electrolyte provides thin, highly adhesive gold coatings ideal for use as a base or strike layer on substrates that are otherwise difficult to plate. Its reliability and performance make it a strong choice for both decorative and functional electroplating applications.

Black Nickel Electrolyte (Smoky Nickel) – Ready-to-Use Electrolyte for Tank, Pen and Brush PlatingProfessional Black Nickel Electrolyte for Decorative Dark Grey to Deep Black Nickel CoatingsThe Black Nickel Electrolyte (Smoky Nickel) from Betzmann Galvanik is a high-quality, ready-to-use plating solution designed for depositing decorative dark grey to deep black nickel coatings.The resulting coatings provide an elegant, modern appearance with a uniform colour finish and are widely used in the jewelry, watch, eyewear, design, restoration, and decorative metal finishing industries.Black Nickel is often used as a cost-effective alternative to Black Rhodium or Black Ruthenium. It offers an attractive dark metallic finish, good adhesion, and simple processing.The electrolyte is suitable for tank plating, pen plating, and brush/tampon plating, making it ideal for professional applications as well as repairs, prototypes, and small series production.Suitable Base MaterialsThe Black Nickel Electrolyte can be applied to various properly prepared metallic surfaces, including:NickelCopperBrassBronzeSilverGoldStainless steel (after suitable activation)Nickel-plated surfacesOther electroplated metalsFor optimum adhesion and durability, a suitable intermediate layer such as nickel or palladium may be recommended depending on the base material.Typical ApplicationsIdeal for:Jewelry manufacturingJewelry repairWatch casesWatch strapsEyewear framesWriting instrumentsDecorative metal componentsDesign objectsClassic restoration projectsModel makingCraftsElectroplating workshopsGoldsmithsJewelersProduct AdvantagesReady-to-use Black Nickel electrolyteDark grey to deep black finishElegant smoky nickel appearanceUniform coating formationGood adhesionDecorative final coatingEasy handlingSuitable for tank, pen and brush platingProfessional qualityIdeal for selective platingSuitable for single parts, repairs, and small production runsTechnical DataRecommended Operating ConditionsTank plating voltage: approx. 1.5–4.0 VoltsPen / brush plating voltage: approx. 3–6 VoltsBath temperature: 20–30 °CAnode material: Graphite electrode or Platinum electrodeReady-to-use electrolyteCoating PropertiesDark grey to deep black nickel coatingSatin to slightly glossy appearanceUniform colour distributionGood abrasion resistanceHigh colour stabilityDecorative final finishApplicationBefore plating, the workpiece must be thoroughly cleaned and activated to ensure optimum adhesion.For consistent results, voltage, electrode distance, plating time, and surface preparation should be adjusted according to the workpiece and application.The electrolyte is suitable for both small repair jobs and complete decorative coating of components.Supplied AsReady-to-use Black Nickel ElectrolyteAvailable in different container sizesQuality from Betzmann GalvanikBetzmann Galvanik supplies professional electrolytes for decorative and technical surface finishing applications.The Black Nickel Electrolyte (Smoky Nickel) produces elegant dark grey to deep black nickel surfaces with excellent colour uniformity and easy processing. It is the ideal solution for jewelry, watches, design objects, restoration projects, and decorative metal finishing – providing an attractive and economical alternative to Black Rhodium and Black Ruthenium coatings.