K-Gold - Clear Gold 10 Gramm/L.

Gold Whitener BMG-122.3 – Mixing Solution for Adjusting Gold Shades Short Description: The Gold Whitener BMG-122.3 is a specially developed mixing solution used in electroplating to lighten gold colors or modify gold tones. When mixed with a standard gold electrolyte, it allows the creation of a wide range of shades – from classic 18-karat yellow gold to champagne or white-gold-like tones. What is the Gold Whitener? The Gold Whitener is an additive (mixer) that is combined with a regular gold electrolyte to adjust and brighten the color of the deposited gold layer. Depending on the mixing ratio, it can produce elegant 18-karat gold tones, lighter yellow gold, champagne shades, or even white-gold-like finishes. What is it used for? Adjusting gold colors: Create lighter or softer gold shades such as 18 K, 14 K, champagne, or white-gold-like tones. Flexible color control: The more Gold Whitener added, the lighter the resulting gold color. Compatible with standard gold electrolytes: No need for a separate base electrolyte – simply mix with your existing gold solution. Application & Mixing Ratio Standard mixture: Mix 2 ml Gold Whitener with 10 ml gold electrolyte to achieve a typical 18-karat gold tone. Lighter shades: Higher proportions of Gold Whitener result in lighter gold or champagne tones. Can also be used undiluted if required. Recommended electrodes: Platinum electrode – for fine, uniform, high-quality coatings Graphite electrode – versatile and widely used Properties & Technical Data Operating voltage: approx. 3.0 – 5.0 V Operating temperature: approx. 18 – 25 °C (room temperature) Gold concentration: approx. 8 – 4 g/l in the electrolyte Coating characteristics: Gold content of the deposit: from 99.9 % (yellow gold) down to approx. 75 % (light, white-gold-like shade) Deposition rate (at approx. 3.5 V with platinum electrode): approx. 0.5 µm per minute (spot plating) Hardness: approx. 220 Hv (yellow gold) to 550 Hv (white-gold-like) Density of the deposit: 15.0 – 19.0 g/cm³ Shelf life: More than 3 years under normal storage conditions Advantages & Applications Highly flexible: Enables a wide range of gold color variations using one base electrolyte Customer-specific finishes: Ideal for matching individual color requirements Cost-effective: No need to maintain multiple gold electrolytes Safety & Notes Not suitable for stainless steel electrode systems during electroplating processes (except for degreasing, activating, or dechroming). Always follow the safety instructions and product documentation provided. Conclusion The Gold Whitener BMG-122.3 is a versatile professional mixing solution for creating lighter gold shades, champagne tones, and white-gold-like finishes. By simply adjusting the mixing ratio with a standard gold electrolyte, you gain full control over the final gold color – from classic 18-karat yellow gold to very light, elegant tones.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Rose Gold Mixer (BMG‑118.3) Additive for Creating Warm Rose Gold and Red Gold Shades in Electroplating Short Description The Rose Gold Mixer (BMG‑118.3) is a specialized additive used to generate warm rose gold and red gold tones by mixing it with a gold plating solution. By adjusting the ratio of mixer to base gold electrolyte, you can achieve a wide range of warm metallic finishes, from subtle rose gold to deep red gold. real-gold.de Applications This mixer is designed for: Producing different rose gold and red gold shades Fine color tuning for decorative metal finishes Jewelry accents, watch cases, frames and accessories Functional coatings with aesthetic appeal Flexible electroplating applications requiring warm gold tones real-gold.de How It Works (Simple Explanation) The rose gold mixer is added to a clear gold plating solution and mixed to produce various alloys: 1 : 10 — Yellow‑red tone / ~18 ct alloy (75 % gold, 25 % copper) 1.5 : 10 — Redder tone / ~15 ct alloy (62.5 % gold, 37.5 % copper) 2 : 10 — Strong red gold / ~12 ct alloy (50 % gold, 50 % copper) 4 : 10 — More intense red (below 10 ct, not decorative recommended) Increasing mixer ratio shifts the alloy toward a deeper red hue, giving greater flexibility in color matching. real-gold.de Benefits of the Rose Gold Mixer Adjustable color spectrum from rose gold to red gold Fast plating and strong adhesion Decorative and functional uses Enhanced plating flexibility Ideal for jewelry and other warm metallic finishes real-gold.de Typical Parameters (Guidelines) PropertyValue / RangeProduct typeAdditive for gold alloy formationUseProducing rose/red gold tonesMixing ratioe.g., 1:10 to 4:10 (mixer : gold solution)ElectrodesPlatinum or graphiteVoltageapprox. 2.7–4 VApplicationsBath, pen, or brush platingSafetyIrritant — observe protective measures * Actual color and deposit properties depend on process conditions and mixing ratio. real-gold.de Practical Application Tips Preparation: Clean and degrease the workpiece. Apply a base gold layer if plating on stainless, nickel, or other alloys. Mixing: Combine the rose gold mixer with clear gold electrolyte in desired proportions. Stir thoroughly for a homogeneous solution. Plating: Proceed with electroplating using recommended voltage. Gentle agitation helps achieve uniform deposition. Post‑Treatment: Rinse with clean water and dry. Light polishing can enhance the finish. Safety Information Wear protective gloves, goggles, and appropriate clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose of waste according to local chemical regulations Conclusion The Rose Gold Mixer (BMG‑118.3) is a versatile additive that allows you to customize warm rose and red gold finishes by combining it with a gold plating solution. Its flexible mixing ratios and excellent plating properties make it ideal for decorative and functional applications in jewelry, accessories, and precision finishes.

White Gold Mixer BMG-120M – Mixing Solution for White Gold Shades Short Description: The White Gold Mixer BMG-120M is a specialized mixing solution used in electroplating to create white gold coatings or to lighten existing gold tones. It is added to a base gold electrolyte and is nickel-free, making it suitable for electroplated items that come into direct contact with skin. What is the White Gold Mixer? The White Gold Mixer is a liquid additive that is mixed with a gold electrolyte to produce a harder, white-colored gold layer. The resulting color is typically light gray to pale white, which reflects the natural appearance of white gold alloys. For a bright, classic white finish, a final top coating with rhodium, palladium, or platinum is often applied after white gold plating. What is it used for? Creating white gold coatings by mixing with a standard gold electrolyte Lightening or modifying gold shades, including subtle white or pale rose tones when combined with other mixers Suitable for electroplated items with skin contact, as the solution is completely nickel-free Application & Mixing Ratio Mix the White Gold Mixer with a base gold electrolyte in a ratio of 2:10 (2 parts mixer to 10 parts gold electrolyte) Typical operating voltage: approx. 4 V Can be used at room temperature; no heating required Recommended electrodes: Platinum electrode – for fine, uniform coatings Graphite electrode – universal and widely used Properties & Characteristics Nickel-free: Ideal for jewelry and skin-contact applications Color effect: Produces a light, white gold tone; can also brighten rose gold shades Compatible: Works with standard gold electrolytes used in pen or tampon electroplating Technical Notes White gold alloys naturally appear grayish to silvery; the bright white finish typically requires an additional rhodium, palladium, or platinum top layer The mixer is not a standalone electrolyte and must always be used in combination with a gold electrolyte Best results are achieved with clean, well-prepared surfaces and fresh electrolyte solutions Safety & Handling Avoid direct skin contact; wear protective gloves and safety goggles Use only in well-ventilated areas Follow all safety instructions provided with the product documentation Conclusion The White Gold Mixer BMG-120M is a professional additive for producing high-quality white gold electroplated coatings and color adjustments. It expands the range of achievable gold shades and is especially suitable for jewelry, accessories, and decorative metal objects that require nickel-free finishes.

Mixer set for measuring Real Gold Betzmann  With this mixer set consisting of 1x measuring cylinder3x pipette3 x beaker you can mix rose gold, white gold, green gold, etc. in the right proportion exactly.

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Brass Effect Mixer BMG-065M – Electroplating Additive for Brass-Like Finishes Short Description: The Brass Effect Mixer BMG-065M is a specialized electroplating additive designed to create brass-like color tones when mixed with a gold electrolyte. By adding this mixer to a standard gold solution, the deposited layer takes on the appearance of classic brass, making it ideal for decorative and functional surface finishes. What is the Brass Effect Mixer? The Brass Effect Mixer is a color-modifying additive that is mixed with a gold electrolyte (such as clear gold or gold flash). It alters the color of the deposited metal layer to resemble traditional brass alloys. Depending on the mixing ratio, the resulting shade can range from classic brass to lighter brass tones. What is it used for? Creating brass-like finishes during gold electroplating Mixing with standard gold electrolytes Fine adjustment of color tones for decorative applications Suitable for workshop, laboratory, and small-scale industrial use Application & Mixing Ratio Standard mixture (1:10): Produces a color similar to polished 70/30 brass alloy (approx. 14 K brass appearance). Lighter tone (1.5:10): Higher mixer ratios result in a lighter brass shade. Color tuning: The exact brass tone can be precisely adjusted by varying the mixing ratio. Recommended electrodes: Graphite electrode – reliable and cost-effective Platinum electrode – for very uniform and refined coatings Technical Information Deposition rate: approx. 2.6 µm/min (1:10 ratio, 3 V, graphite electrode) Operating temperature: approx. 20–25 °C Shelf life: up to 6 months under normal storage conditions Hazard information: Product is irritating – follow safety instructions Key Benefits Enables authentic brass-like finishes using a gold electrolyte Flexible color control through adjustable mixing ratios Compatible with commonly used gold plating solutions Ideal for decorative metal finishes and surface restoration Safety Notes Wear protective gloves and safety goggles during use Ensure adequate ventilation Avoid direct skin contact Follow all safety and handling instructions provided with the product documentation Conclusion The Brass Effect Mixer BMG-065M is a professional electroplating additive for producing brass-colored coatings from a gold electrolyte. With simple mixing and precise ratio control, it allows the creation of a wide range of brass tones – from classic polished brass to lighter variations – making it a versatile solution for decorative electroplating applications.

Green Gold Mixer BMG‑119 Additive for Creating Green Gold Shades in Electroplating Short Description The Green Gold Mixer BMG‑119 is a chemical additive used to adjust the color of gold plating solutions, allowing you to create green gold tones and antique gold effects. By mixing this additive with a clear gold electrolyte, a wide range of gold hues can be achieved – from soft pastel green to intense green gold or antique gold. Applications The Green Gold Mixer is used to: Create green gold shades in electroplated coatings Produce antique or special gold finishes Adjust color intensity by varying the additive-to-gold ratio Achieve decorative effects for jewelry, accessories, or metal objects Customize color tones to match design requirements How the Green Gold Mixer Works (Simple Explanation) The additive is mixed in a defined proportion with a clear gold electrolyte before electroplating: Prepare a clear gold plating solution. Add the Green Gold Mixer in the desired ratio (e.g., 1 part mixer to 10 parts gold solution). Stir the mixture thoroughly. Start electroplating – the deposited layer displays the intended green gold tone. Benefits of the Green Gold Mixer BMG‑119 Adjustable green gold tones, from light to intense Decorative and elegant finishes, ideal for jewelry or design objects Easy color control by changing the mixer ratio Compatible with clear gold electrolytes Flexible use in various electroplating processes Technical Parameters (Guideline Values) PropertyValue / RangeProduct typeAdditive for gold electrolyteApplicationColor adjustment for gold electroplatingMixing ratioe.g., 1:10 (Green Gold Mixer : clear gold solution)Color rangeLight green to antique/green goldCompatible withClear gold electrolytesElectrodePlatinum or graphiteVoltagefrom approx. 3 VStorageCool, dry, tightly sealed Note: Exact color depends on the mixing ratio and process parameters; testing is recommended to achieve the desired shade. Practical Application Instructions Preparation: Prepare the clear gold electrolyte. Measure the Green Gold Mixer according to the desired ratio (e.g., 1:10). Mixing: Combine mixer and clear gold solution thoroughly. Stir well before plating. Plating: Electroplate as usual; the resulting layer will display the green gold tone according to the mixture. Increase mixer ratio for deeper shades. Post-Treatment: Rinse plated parts with clean water. Dry and, if desired, lightly polish to enhance shine. Safety Instructions Wear protective gloves, goggles, and appropriate clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work in well-ventilated areas Do not ingest; keep out of reach of children Dispose according to local chemical waste regulations Conclusion The Green Gold Mixer BMG‑119 is a flexible additive for color control in gold electroplating. By combining it with a clear gold solution, you can create custom green gold and antique gold shades, making it an ideal tool for creative and decorative plating projects.