Brass Effect Mixer

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

K-Gold - Clear Gold Electroplating Solution – for Pen, Bath & Swab Plating (10 g) Professional cyanide-free gold electrolyte for selective and immersion plating The K-Gold electroplating solution is a premium, cyanide-free gold electrolyte designed for pen plating, swab (tampon) plating and bath electroplating. It is ideal for jewellery finishing, repair plating, precision components and controlled gold deposition on small parts. The solution deposits a high-purity gold layer (up to 24 K) with excellent adhesion and uniform thickness. It can be used pure or blended with coloured gold additives to achieve specific karat values and gold shades. Key Features & Benefits High-purity gold electrolyte (≈ 10 g Au/L equivalent) Cyanide-free formulation for safer professional use Suitable for three plating methods: – Pen plating – Swab / tampon plating – Bath (immersion) plating Excellent adhesion on nickel, copper, silver and brass (proper pretreatment required) Soft, burnishable gold deposit with high visual quality Technical Parameters Gold concentration: approx. 10 g/L equivalent Deposit purity: 99.9–100 % gold Operating voltage: – Pen / swab plating: from 3.5 V – Bath plating:  3 V (current-controlled recommended) begin with 0,1 Ampere pro cm2 Temperature: 20–25 °C Recommended anode: Carbon or platinised titanium (bath) Hardness: approx. 170–180 HV Density: approx. 19.0 g/cm³ Pen Plating Application Ideal for localised plating, repairs and touch-ups. Clean, degrease and activate surface Load plating pen or swab with K-Gold solution Apply 2–3.5 V Move evenly across the surface to build the layer Swab / Tampon Plating Application Best for controlled selective plating on larger areas. Soak swab with electrolyte Maintain gentle, even contact Keep voltage stable Repeat passes to achieve desired thickness Bath Plating Application For uniform full-surface gold plating of small components. Thorough surface preparation Fill plating bath with K-Gold solution Use carbon or platinised titanium anode Apply low current density at 2–4 V Rinse and dry after plating Notes Air-sensitive – reseal container immediately after use Can be mixed with gold colour additives for karat matching Suitable for decorative and functional gold coatings

Mixer set for measuring Real Gold Betzmann  With this mixer set consisting of 1x measuring cylinder3x pipette3 x beaker you can mix rose gold, white gold, green gold, etc. in the right proportion exactly.

Graphite Electrode Ø 6 mm – Universal Electrode for Professional ElectroplatingChemically Inert Graphite Electrode for Tank, Pen and Brush PlatingThe Graphite Electrode Ø 6 mm is manufactured from high-quality, high-density fine-grain graphite and is ideal for a wide range of electroplating applications. It is used wherever a metal-free, chemically inert electrical conductor is required and contamination of the electrolyte by metal ions must be avoided.Thanks to its excellent chemical resistance, graphite dissolves only very slowly in the electrolyte. This keeps the electrolyte composition stable and ensures high-quality, uniform plating results.The graphite electrode is perfectly suited for tank plating, pen plating and brush (tampon) plating and is compatible with a wide variety of electroplating solutions.Your AdvantagesManufactured from high-quality fine-grain graphiteChemically inertVery low wearNo contamination of the electrolyte with metal ionsExcellent chemical resistanceUniform current distributionSuitable for a wide range of electroplating processesLong service lifeFits standard 6 mm electrode holdersProfessional quality from Betzmann GalvanikWhy Use a Graphite Electrode?Many electroplating processes require that no additional metal ions enter the electrolyte, as these can negatively affect coating quality.Graphite offers several important advantages:Chemically almost inertVery low solubilityExcellent temperature resistanceGood electrical conductivityNo contamination of the electrolyteThese properties make graphite the preferred choice for many decorative and technical plating applications.Typical ApplicationsIdeal for:Gold platingSilver platingChromium platingPalladium platingPlatinum platingWhite bronze platingBlack nickel platingTank platingPen platingBrush (tampon) platingActivating solutionsCleaning solutionsWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from high-density fine-grain graphite and offers:Excellent chemical resistanceGood electrical conductivityLow wearSlow consumption in the electrolyteLong service lifeApplication InstructionsBefore use:Keep the electrode clean and free from greaseUse a suitable electrolyteFollow the recommended voltage and current settingsDuring operation, the graphite electrode wears only slowly. Replacing it when necessary ensures consistently high-quality plating results.Technical SpecificationsMaterial: High-density fine-grain graphiteDiameter: 6 mmExcellent chemical resistanceVery good electrical conductivitySuitable for standard electrode holdersPackage Contents1 × Graphite Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Graphite Electrode Ø 6 mm offers excellent chemical resistance, long service life and universal compatibility, making it the ideal choice for hobby users, workshops and industrial applications.

Hard Gold Electrolyte 8 g/L – For Pen Plating, Tank Plating and Brush PlatingHard Gold for High-Quality, Durable Gold CoatingsThis Hard Gold Electrolyte containing 8 g/L gold is designed for electroplating applications using pen plating, tank plating and brush plating. It allows precise local gold deposition as well as the coating of suitable workpieces in a plating bath.According to the technical product specifications, the deposited gold layer contains 99.9% gold and has a hardness of 220–230 HV. This makes the electrolyte particularly interesting for applications requiring an attractive gold finish combined with increased coating hardness.Whether you need decorative gold plating, replating of existing surfaces or targeted surface finishing of components, this electrolyte offers versatile applications for professional users and demanding DIY enthusiasts.Key BenefitsHard gold electrolyte with 8 g/L goldSuitable for pen plating, tank plating and brush platingGold content of the deposited layer: 99.9%Deposit hardness: 220–230 HVSuitable for decorative gold plating and replatingFor local coating applications and immersion platingApproximate deposition rate of 0.5 µm per minute under specified reference conditionsMaximum specified coating thickness: 5 µmTechnical DataPropertySpecificationProduct typeHard gold electrolyteGold concentration8 g/LVoltage range3–5 voltsOperating temperature14–25 °CElectrode materialPlatinum or carbonGold content of deposited layer99.9%Deposition rateApprox. 0.5 µm/min at 3.5 V with a platinum electrodeCathode efficiency35–40% at 3.5 V with a platinum electrodeMaximum coating thickness5 µmDeposit hardness220–230 HVDeposit density19.3 g/cm³Deposit stressMediumStorageProtect from sunlightShelf life1 yearPotassium cyanide content0.3%Transport classification according to product dataNot classified as dangerous goods for transport; no UN number specifiedPen Plating ApplicationsPen plating is particularly suitable for spot plating, small areas, edges and targeted repairs. Using a suitable plating unit and pen electrode, individual areas can be coated without immersing the entire workpiece in a plating bath.The specified voltage range is 3–5 volts. The appropriate setting depends on the plating unit, electrode, workpiece surface and operating conditions.Brush Plating ApplicationsIn brush plating, the electrolyte is applied to the prepared workpiece using a suitable applicator or swab saturated with electrolyte. This method allows selective gold plating of larger areas and complex components that cannot be fully immersed in a plating bath.The stated deposition rate of approximately 0.5 µm per minute refers to a test area that remains continuously covered by the plating swab. Actual deposition rates may vary with the surface area, application technique and operating conditions.Tank Plating ApplicationsTank plating is suitable for coating workpieces that can be fully or partially immersed in the electrolyte. It is particularly useful when an entire component or its accessible surfaces need to be plated.Uniform results require suitable surface preparation, appropriate electrode positioning and process parameters adapted to the workpiece. The specified operating temperature is 14–25 °C.Hard Gold with High Deposit HardnessThe specified deposit hardness of 220–230 HV is an important characteristic of this electrolyte. According to the product data, the deposited layer contains 99.9% gold.The term hard gold refers to the product characteristic stated in the manufacturer's specifications. Actual hardness and wear resistance also depend on plating conditions and the structure of the deposited layer.The maximum specified coating thickness is 5 µm. The actual deposition depends on factors such as plating time, power supply, electrode configuration and workpiece geometry.Electrodes and Process NotesPlatinum or carbon electrodes are specified for this electrolyte. Stainless steel anodes are expressly not recommended for most of the intended plating processes.The reference values for deposition rate and cathode efficiency apply at 3.5 volts using a platinum electrode. They should not automatically be applied to other electrode materials or assumed to apply identically to all three plating methods.Storage and Shelf LifeStore the electrolyte protected from direct sunlight. The specified shelf life is one year.Hard Gold Electrolyte from Betzmann GalvanikThe Hard Gold Electrolyte 8 g/L is a versatile solution for pen plating, tank plating and brush plating. The high gold content of the deposited layer and the specified hardness of 220–230 HV make it an interesting option for demanding gold-plating work, decorative surface finishing and targeted replating.Betzmann Galvanik – Electroplating products and solutions for high-quality surface finishing.