Skip to main content Skip to search Skip to main navigation

Gold Solution 2 Gramm / Liter

Product information "Gold Solution 2 Gramm / Liter"

PRODUCT PRESENTATION - GOLD ELECTROLYTE 999 FINE GOLD - 23,8 CARAT 

WITH 2 GRAMS OF GOLD PER LITER

 

Do-it-yourself gold plating has never been so easy. Our Gold Electrolyte from Betzmann Galvanik can be purchased by anyone. So whether it is for use in the highly professional use of laboratories, industry, luxury companies, to the use in the hobby, main or in the side business, companies, schools, universities, TH , IHK or other authorities.

With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly:

Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,  

The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition. 

The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe. 

Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes.

The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating! 

The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more.

Partial coatings are possible by masking and masking surrounding areas.

To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..  

Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold!

Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more.

Graphite electrodes can also be used. 

Gold content: 2 grams per liter 

 

The procedure for gold plating:

It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be

Thorough degreasing with the electrocleaner

Activate the surface with the activator

Gilding with platinum electrode starting around 5 volts

 

Operating Conditions and Deposit Data

Plating Factor 0.01 A/cm2
Plating rate 0.12 micron per minute at 0.01A/cm2
Temperature 18 – 25 °C
pH 4.4 – 5.0
Gold concentration 2 grams per litre
Agitation very low (Stirring Bar Mini)
Electrode Mesh
Gold content in plate 99.9% (balance carbon)
Cathode efficiency ~25% at Plating Factor = 0.01A/cm2
Hardness 190 – 210 Hv
Density of deposit 19.3 g/cm3
Stress Medium
Special storage requirements Away from sunlight
Shelf life 1 – 2 years
Health and Safety classification Harmful
   
 
 
GHS07cBeWAatKcYluY
 
 

Signalword: Warning 

H-phrases:

H332 Harmful by inhalation.

H312 Harmful in contact with skin.

H302 Harmful if swallowed.

EUH032 Contact with acids liberates very toxic gas.

P phrases:

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

 

Similar Items

Platinum Electrode
Platinum electrode from Betzmann-Galvanik:   We know that when plating with gold or silver, you want to achieve only the best results and this is achieved by using our platinum electrode (platinized titanium). This will more than meet your requirements. It hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, we recommend the use of this electrode.   Care should be taken to clean the electrode carefully after each use!     Properties "Platinum Electrode 6 mm Platinum electrode (platinized titanium with a platinum layer of 2.5 µm platinum) Ø 6 mm x 100 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials, etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 2.5 μm.   In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable.   This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode.   Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates.   Recommended operating data:   Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C    

€49.00*
Anode sleeve fuzzy
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

€2.38*
Thickener
THICKENER: Will thicken up any of our solutions, turning them into a non-drip gel   Features Used for Creates a gel when mixed with our solutions Resulting gel helps prevent the solution from running off the work. This is particularly useful when you are working in-situ, for example gold plating bathroom taps or an architectural feature of a building, where it is impossible to catch the run-off in the normal drip trays      

Content: 0.1 Liter (€155.00* / 1 Liter)

From €15.50*