Silver Electrolyte BMG‑103.8 High-quality silver plating solution – 30 g of silver per liter Short Description The Silver Electrolyte BMG‑103.8 is a ready-to-use electroplating solution formulated for the electrolytic deposition of bright, high-quality silver layers. With 30 grams of silver per liter, it produces uniform, reflective, and conductive silver coatings suitable for both decorative and functional applications. The deposited silver layer provides excellent optical brightness, good wear resistance, and high electrical conductivity, ideal for jewelry, electronics, and precision components. Applications This silver plating solution is used for: Decorative silver plating for jewelry, accessories, and ornamental items Functional plating to improve electrical and thermal conductivity Wear-resistant surfaces and protective coatings Tank, brush, and pen/peg plating, depending on equipment Multi-layer plating systems (e.g., copper → silver → gold) Silver plating enhances both aesthetic appeal and surface performance, especially where brightness and conductivity are important. How Silver Plating Works (Simple Explanation) Silver plating uses electrolytic deposition, where silver ions in the electrolyte are reduced under direct current and form a metal layer on a prepared surface: Surface Preparation: Clean and degrease the workpiece thoroughly to remove oils and contaminants. Activation: Activate the surface if necessary to ensure good adhesion. Electroplating: Connect the part as the cathode (negative pole) and apply direct current; silver ions migrate and deposit as a smooth, bright layer. Finishing: After plating, rinse and dry – the silver layer remains bright and reflective. The resulting silver coating is uniform, glossy, and durable. Benefits of Silver Electrolyte BMG‑103.8 Bright, reflective silver finish Good electrical and thermal conductivity Suitable for decorative and functional applications Compatible with tank, brush, and pen/peg plating Produces uniform and durable deposits Ideal for jewelry, electronics, contacts, and connectors Technical Parameters PropertyValue / RangeElectrolyte typeSilver electroplating solutionSilver contentapprox. 30 g/LpHslightly acidic to neutral, optimized for silver depositionOperating temperature15–30 °CVoltage (tank plating)1.5–3.5 VVoltage (brush/pen plating)3–7 VCurrent density0.5–3 A/dm²Anode materialGraphite or pure silverTypical deposit thickness1–5 µm (adjustable by time/parameters)Surface appearanceBright and smoothDeposit purity>99.9 % silverConductivityVery goodShelf life1–2 years Note: Values are practical guidelines and may vary slightly depending on equipment, setup, and application conditions. Practical Application Tips Surface Preparation: Thoroughly clean and degrease workpieces to remove grease, oils, and fingerprints. Perform activation if necessary for uniform adhesion. Silver Plating: For tank plating, maintain consistent voltage, current density, and electrolyte circulation. For brush or pen plating, keep tools moving steadily for even coverage. Masking: Use masking tape or resist materials for areas not to be plated. Post-Plating: Rinse plated parts with clean water. Dry and, if desired, gently polish to enhance brightness. Safety Information Silver electrolytes are chemical solutions and must be handled carefully: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes; rinse immediately if contact occurs Work only in well-ventilated areas Do not ingest; keep out of reach of children Dispose of waste according to local chemical and environmental regulations Silver salts and electrolytes may cause irritation; proper protective measures are essential for safe use. Conclusion The Silver Electrolyte BMG‑103.8 is a reliable and versatile electroplating solution that delivers bright, uniform, and conductive silver layers for both decorative and functional purposes. Its ease of use across tank, brush, and pen/peg plating processes, combined with excellent optical and technical properties, makes it suitable for hobbyists, workshops, and professional plating environments. Proper surface preparation and process control ensure high-quality silver finishes every time.

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.

Gold Electrolyte – 2 g/L Gold Plating Solution (BMG-077-TG-2GM)Brilliant, Durable Gold CoatingsOur high-quality Gold Electrolyte (2 g/L) allows uniform, brilliant, and long-lasting gold plating. Perfect for jewelry, technical parts, and professional applications requiring high corrosion resistance, conductivity, and optical perfection.Suitable for bath plating, brush plating, and pad plating.💡 Note: Always ensure proper cleaning and surface preparation for best results.Key Benefits✔ Bright, mirror-like gold finish✔ Excellent wear and abrasion resistance✔ High corrosion and tarnish protection✔ Uniform, adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for jewelry, watches, and technical components✔ Can be combined with palladium or rhodium pre- and post-coatingsTechnical SpecificationsParameterValue / RecommendationGold Content2 g/LVoltage (Bath)2.0 – 4.0 VVoltage (Brush/Pad)3.0 – 6.0 VTemperature20 – 40 °CpH Valuestrongly acidicElectrodesPlatinum or titaniumCoating Colorbright yellow goldLayer Thickness0.1 – 2 µm (adjustable)Depositionuniform & controllable💡 Pro Tip: A pre-layer of palladium improves adhesion and reduces surface imperfections.ApplicationsJewelry (rings, chains, gold alloys)Watches and luxury itemsElectrical contacts and connectorsPrecision technical componentsDecorative and protective coatingsApplication – Step by StepClean & degreaseActivate surfacePre-plating (optional but recommended) – palladium or nickelGold plating – bath, brush, or padPost-treatment – rinse, dry, optional protective layer💡 Pro Tip: Use a clean platinum electrode and proper current density to achieve the most uniform, high-brightness finish.CompatibilityElectroplating bathsBrush plating devicesPad plating systems👉 Can be combined with:Palladium or rhodium pre-coatingCorrect electrodes and fabric padsPractical ExamplesGold-plated rings and chains with high brillianceTechnical contacts with wear-resistant gold finishDecorative items with precise, even gold layersFAQWhy use gold electrolyte?For a brilliant, conductive, and corrosion-resistant gold layer.How thick should the gold layer be?Depends on application: decorative 0.1–0.5 µm, technical 1–2 µm.Is it suitable for beginners?Yes, with proper cleaning, activation, and controlled current.Which electrode works best?Platinum electrodes produce the most stable, uniform results.Recommended AccessoriesPower supply / rectifiersElectrodes (Platinum / Titanium)Cleaners & activatorsGalvanic plating systemsOrder Gold Electrolyte 2 g/L NowAchieve high-brightness, durable, professional gold coatings for jewelry, electronics, and technical applications.👉 Order now and create perfect surfaces.

Gold Electrolyte 8 g/L – High-Performance Gold Plating SolutionFast Deposition & Brilliant Gold CoatingsThis high-quality gold electrolyte with 8 g/L gold content is designed for demanding and professional gold plating applications. It enables fast deposition rates, intense gold color, and uniform, highly adhesive coatings.Suitable for bath plating, brush plating, and pad plating – ideal for jewelry, technical components, and industrial use.Key Benefits✔ High gold content (8 g/L) for fast plating results✔ Bright, rich gold color✔ Uniform and highly adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for professional and industrial applications✔ Compatible with pre-plating (silver, palladium, platinum)Technical SpecificationsParameterValue / RecommendationGold Content8 g/LVoltage (Bath)approx. 2.5 – 4.0 VVoltage (Brush/Pad)approx. 3.0 – 6.0 VTemperature18 – 28 °CpH Valueneutral to slightly acidic (system dependent)ElectrodesPlatinum or graphiteDeposition RatefastLayer Thicknessadjustable via time & current💡 Note: Higher gold content allows faster deposition and thicker layers in a shorter time.ApplicationsJewelry (rings, chains, watches)Electrical contacts and connectorsTechnical componentsRepair and restoration of gold coatingsProfessional and industrial productionWhen to Use 8 g/L Gold ElectrolyteApplicationSuitabilityFast plating⭐⭐⭐⭐⭐Thick layers⭐⭐⭐⭐⭐Professional use⭐⭐⭐⭐⭐Fine decorative plating⭐⭐⭐⭐☆👉 Conclusion: Ideal for users who need efficient, fast, and high-quality gold plating.Application – Step by StepClean and degrease the surface→ essential for adhesionActivate the material→ use an appropriate activatorGold plating process→ apply electrolyte (bath, brush, or pad)Post-treatment→ rinse and finish💡 Pro Tip: Surface preparation determines up to 80% of the final coating quality.CompatibilityThis gold electrolyte can be used with:Galvanic systems (bath plating)Brush plating devicesPad plating systems👉 Also compatible with:Silver, palladium, or platinum pre-platingDifferent electrode types (platinum recommended)Practical ExamplesGold plating a ring within minutesFast coating of electrical contactsConsistent results in series productionFrequently Asked Questions (FAQ)Why use 8 g/L gold electrolyte?It enables faster deposition, thicker coatings, and professional results.Is it suitable for beginners?Yes, with proper preparation and basic knowledge, it is easy to use.How durable is the gold coating?With correct application, the coating is highly durable and wear-resistant.Which electrode is recommended?Platinum electrodes provide the most stable and high-quality results.Recommended AccessoriesPower supplies and rectifiersElectrodes (platinum or graphite)Cleaners and activatorsComplete galvanic systems👉 The right combination of equipment, electrolyte, and electrode ensures optimal results.Order Gold Electrolyte 8 g/L NowAchieve fast, brilliant, and professional gold plating results with a high-performance electrolyte.👉 Order now and start plating with precision and efficiency.