Anodenhüllen / Anodentampons
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.
Big Swab: For use with the flat Stainless Steel Electrode and flat Platinum Electrode for electroplating large surfaces.Our swabs will last a long time if thoroughly rinsed under running water after each use.Size: 5 x 10 cm
Replacement felts for our Betzmann Electroplating Galvano Pen 1 bag = 10 pieces
Anode cloth pad - thin, multi-layered anode covers - replacement covers for pad electroplatingfrom Betzmann Galvanik This thin, very robust anode fabric pad consists of several layers of fabric sewn together and is ideal for coating any surface of small, delicate filigree areas or localized coatings.It does not wear out so quickly, especially on rough or coarse surfaces. At the lower end there are 2 insertion holes for the anode rod up to 4 mm (for 6 mm electrodes, the holes can be enlarged using scissors or a knife. If this has already worked its way through the fabric at the top, you can continue to use the anode fabric pad by inserting it into the other insertion hole. Please soak the pad thoroughly before use, otherwise it will not conduct. Scope of delivery: 1 piece!
Big Swab XL: For use with the Large Stainless Steel Electrode and Large Platinum Electrode for electroplating large surfaces. Our swabs will last a long time if thoroughly rinsed under running water after each use. Size: 6 x 12 cm
Flat Stainless Steel Electrode with Cloth Pad & Cable Set (BMG-032) Short Description The Flat Stainless Steel Electrode with Cloth Pad & Cable Set is a practical, all-in-one solution for electroplating large or flat surfaces. It combines a stable stainless steel electrode with a absorbent cloth pad and a connection cable for easy power supply integration. Product Description This wide, flat stainless steel electrode is designed to enable faster and more uniform plating on larger objects such as signs, plates or dial faces. The increased contact area reduces plating time compared to smaller electrodes. The cloth pad holds electrolyte effectively and ensures even distribution across the electrode surface, while the included connection cable allows simple connection to compatible grips or plating power supplies. Typical Applications Bath, pen or pad electroplating on larger surfaces Plating of signs, plates, dials or flat decorative parts Time-efficient coverage compared to small electrodes Key Benefits Complete set: electrode, cloth pad and cable included Wide contact area: speeds up plating Durable stainless steel: good chemical resistance Absorbent pad: even electrolyte delivery Easy to connect: plug-and-play setup with standard systems