Sleeves -Swab thin duraflap

PRODUCT PRESENTATION - GOLD ELECTRTOLYT 999 FINE GOLD - 23,8 CARAT  WITH 8 GRAMS OF GOLD PER LITER   Do-it-yourself gold plating has never been so easy. Our gold electrolyte from Betzmann Galvanik may be purchased by anyone. Whether it is for use in highly professional laboratories, industry, luxury companies, to the use in the hobby, main or secondary trade, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,   The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition.  The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe.  Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative causes a very long shelf life of at least 2 years and prevents sedimentation, as it occurs with many other gold electrolytes. The gold electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..   Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm length or the flat platinum electrode, because platinum electrodes can build up very thick layers far over 10 microns and more. Graphite electrodes can also be used.  Gold content: 8 grams per liter    The procedure for gilding: Recommended to first polish the surface to a shine - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts     Voltage Range 3.0 – 8 volts Temperature 14 – 25 °C Gold Concentration 8 g/l Electrode Platinum or Carbon (see notes) Gold content in plate 99.9% (balance carbon) Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.7 micron per minute (spot) Hardness 220 – 230 Hv Density of deposit 19.0 g/cm3 Stress Medium stress Special storage requirements Away from sunlight Shelf life 1 – 2 years     Signalword: Warning H-phrases:H332 Harmful by inhalation.H312 Harmful in contact with skin.H302 Harmful if swallowed.EUH032 Contact with acids liberates very toxic gas.P phrases:P280 Wear protective gloves/protective clothing/eye protection/face protection.P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

Storage cup for the professional coating machine 50 Ampere Betzmann Galvanoshop:    This stable cup with screw cap fits perfectly into the holder of the professional electroplating unit. Capacity 300 ml. On request, you will receive the appropriate labelling for the material to be stored.   

Our copper electrolyte alkaline for acid-sensitive metals is cyanide-free! Ideal for bath and tampon - / pin electroplating suitable 50 grams copper / liter For use on iron and zinc metals Easy to use and cyanide free   Ideally suited to copperplate even acid-sensitive materials (iron, zinc or steel). For example, copper plating can also be applied to materials that are attacked by the acidic copper electrolyte - for example, rusting steels or other ferrous materials. Copper plating effectively protects workpieces made of iron and steel against rust and gives them an attractive surface thanks to the typical red luster of the precious metal. Because of its good solderability, electroplated copper plating is ideal for the production of printed circuit boards or similar. Simply use the copper electrolyte together with a copper sheet as anode and you can quickly provide a component with a shiny copper coating yourself. The exact instructions for use can be found in our guide here in the download area! For copper plating of non-acid sensitive materials please use the Betzmann Electroplating Bright Copper Electrolyte.  Alkaline copper electrolyte can be used in bath electroplating as well as in pin electroplating/tampon electroplating. Since it enables electroplating of acid-sensitive metals, it is suitable for many applications. Important properties of alkaline copper electrolyte are excellent leveling and good scattering. This color tone can be further enhanced by an additional coating with our bright copper electrolyte. Applications for Copper Electrolyte Alkaline Copper Alkaline prepares acid-sensitive materials for copper plating with acidic copper electrolyte. These include, for example, various ferrous materials or zinc. A particular advantage is that it does not deposit electrolessly on iron, which would form a loose coating before electrodeposition begins. This increases adhesion to ferrous materials. Basic copper electrolyte serves as an intermediate layer for acid-sensitive metals before final plating with acid electrolytic copper or other coatings. Basic copper electrolyte is suitable for the following metals:   Lead, bronze, iron, copper, brass, zinc, tin, steel, zinc die casting and many others. Basic copper is not suitable for aluminum, chromium and titanium. Aluminum requires pretreatment with aluminum activator Please test all other metals not mentioned above for their suitability for electroplating before copper plating.  Application instructions for copper electrolyte alkaline Copper Electrolyte Alkaline is suitable for all electroplating processes from bath electroplating to pin electroplating / pad electroplating. It already works at room temperature; however, it can be heated if necessary. The ideal temperature range is between 25 - 50°C. Clean the workpiece thoroughly before treatment. Please remove dirt and rust with appropriate tools.  Handle the object only with disposable gloves to avoid transferring skin grease to the surface.  Parameters for the use of copper electrolyte alkaline Copper anodes are optimal, nickel or tin anodes are also suitable. Anode on positive pole - Workpiece on negative pole   Recommended electrode: Copper.   Operating Conditions and Deposit Data Voltage Range 4 volts Temperature Above 15 °C Copper Concentration 36 g/l Electrode Copper, Carbon or Platinum(see notes) Copper content in plate 99.8% Plating Rate at (3.5 volts, Platinum electrode) 2 microns per minute (spot) Hardness 370 Hv Density of deposit 8.9 g/cm3 Stress Low – medium stress Special storage requirements None Shelf life 1 – 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) None: Not classified as dangerous for transport  Notes:   We strongly advise against the use of stainless steel anodes for most of our plating processes Plating rates are calculated over a sample area which is permanently covered by swab. Copper electrolyte alkaline / basic for acid sensitive materials The copper gives a beautiful shiny finish. It can still be used with our Bronze- Mixer can be used to mix different color shades from red gloss to white bronze to be able. White bronze is increasingly desired and used as a nickel substitute.   Copper electrolyte alkaline for acid sensitive metals Copper electrolyte alkaline (basic) can be used in both bath electroplating and pen plating / tampon plating. Our alkaline copper electrolyte contains no cyanides. Since it enables electroplating of acid-sensitive metals, it is suitable for many applications. The important properties of alkaline copper electrolyte are excellent levelling and good dispersion. In addition, alkaline or basic copper impresses with an intensive and visually attractive color tone. An additional coating with our bright copper electrolyte can further enhance this color tone. Application areas for copper electrolyte alkaline Copper alkaline prepares acid-sensitive materials for copper plating with acid copper electrolyte. These include various ferrous materials or zinc. A particular advantage is that it does not deposit on iron without current, which would form a loose coating before galvanic deposition begins. This increases the adhesion on ferrous materials. Basic copper electrolyte serves as an intermediate layer for acid-sensitive metals before the final coating with acid electrolytic copper or other coatings. Basic copper electrolyte is suitable for the following metals: Lead, bronze, iron, copper, brass, zinc, tin, steel, zinc die-cast and many others Basic copper is not suitable for aluminum, chrome and titanium. Aluminium requires a pretreatment with the aluminium activator Please test all other metals not mentioned above for their suitability for galvanic copper plating before copper plating Application notes for copper electrolyte alkaline Copper electrolyte alkaline is suitable for all electroplating processes from bath plating to pen plating / pad plating. It already works at room temperature; however, it can be heated up if required. The ideal temperature range is between 25 - 50°C. Clean the workpiece thoroughly before treatment to remove grease and oil. Please remove dirt and rust with appropriate tools. Handle the object with disposable gloves only to avoid transferring skin grease to the surface. Parameters for the use of copper electrolyte alkaline Anodes made of copper are optimal, nickel or tin anodes are also suitable. Anode on positive pole - workpiece on negative pole           Always use gloves and protective goggles and do not inhale the vapors / aerosols. Use only in well ventilated areas!       Identification of the mixture:   Copper electrolyte alkaline (contains copper sulfate, potassium hydroxide)   GHS05 GHS09 GHS07 Signal word: Danger H-phrases: H314: Causes severe skin burns and eye damage. H411: Toxic to aquatic life with long lasting effects. P phrases: P102: Keep out of the reach of children. P280: Wear protective gloves / clothing / eye protection. P301 + P330 + P331: IN CASE OF INSPECTION: Rinse out mouth. Do NOT induce vomiting. P303 + P361 + P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water/shower. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove existing contact lenses if possible. Continue to rinse. P501: Dispose of contents/container to hazardous waste.              

Product information “Silver electrolyte” silver plating - cyanide free! Article description:Betzmann electroplating silver electrolyte - the product properties at a glance: 330 grams of silver per liter - Highly concentrated for fast silver plating Cyanide-free and safe to use - ideal for jewelry manufacturers and also for hobby usersSuitable for bath and pin electroplatingBuilds up thick silver layers very quickly Creates shiny silver layers that can be polished to a high shinePlease note that you need both a power supply unit and a bath or pin electroplating system to create abrasion-resistant silver layers on objects.Silver briefly deposits grey and is then gently polished to a shine with a damp microfiber cloth, then the bright white silver appears. A yellow clouding of the fabric pad during silver plating is normal and decomposes again after a short time. The silver electrolyte is ideal for bath and pin electroplating. With the cyanide-free silver electrolyte from Betzmann Galvanik, you can easily electroplate silver yourself! In contrast to the highly toxic silver electrolytes commonly used in industry, the cyanide-free silver electrolyte is safe to handle.The electrolyte deposits robust and attractive layers of fine silver. The silver is deposited brightly and generally no longer needs to be polished. The electrolyte is ideal for silver-plating jewelry, restorative silver-plating of silver cutlery and galvanic silver-plating of many other objects. Due to the high silver content of 30 grams per liter, the electrolyte deposits silver very quickly - this is particularly advantageous in pin electroplating, as it reduces the working time. Base metals such as zinc or iron should be nickel-plated, copper-plated or silver-plated before silver-plating. Please note that the silver electrode is the optimum electrode for silver plating!We have corresponding electrodes in our range. Alternatively, graphite electrodes and platinum electrodes can be used!Voltage: From 2.7 volts!Operating conditions and deposition data Voltage 2 - 3 volts Deposition rate 1 micrometer per minute (spot)Temperature 15 - 25 °C Silver concentration in the solution 30 g/l Electrode Silver, platinum or graphiteSilver content in the plate 99.9% (fine silver) Brightness (L*) of the deposition 90 - 93 (Cielab)Hardness 251 Hv Density of the deposit 10.4 g/cm3Voltage Medium Special storage requirements Protected from sunlightShelf life 1 - 2 years Health and safety classificationIrritant Special information None (cyanide-free)Transportation (UN number) None: Not classified as dangerous for transportationFurther information: To maintain full shine, polish lightly with Ultra or Ultrafine metal polish or gold polishLabeling according to CLP-VO:Symbol word:Warning! H302 Harmful if swallowedH315 Causes skin irritation.H319 Causes serious eye irritation.P261 Avoid breathing dust/fume/gas/mist/vapor/aerosol.P280 Wear protective gloves/protective clothing/eye protection/face protectionP305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

Gold whitener from Betzmann Galvanik - This new mixer liquid can be used in conjunction with our normal gold electrolyte to create different lighter gold tones, such as 18 carat gold. You simply mix in a ratio of 2:10 ml (2 ml gold whitener and 10 ml gold electrolyte) to create an 18 carat gold tone. The more gold whitener you add, the brighter the gold will be. Can also be applied pure! Gold brightener:  When mixed with our Gold Electrolyte, it creates many different shades of gold, from a hue similar to 18 karat yellow gold, to pale yellow, to a grayish hue common to white gold alloys. Features / Advantages The Gold Weisser can be mixed with our standard gold plating solution in a ratio of 2 to 10. Bleaches back the hue of our standard gold solution to create a finish similar to most common 18-karat gold tones No need to buy another base solution - just mix it with our standard gold. You can add more Gold Weisser to lighten the shade further, or add less to create a richer shade. Great flexibility - you can meet your customers' exact requirements Operating conditions and deposition data Voltage range 3.0 - 5.0 volts Temperature 18 - 25 °C Gold concentration 8 - 4 g/l Electrode Platinum or graphite electrode Gold content in the plate 99.9% (yellow gold) - 75% (gray-white) Deposition rate at (3.5 volts, platinum electrode) approx. 0.5 microns per minute (spot) Hardness of: 220 (yellow gold) - 550 Hv (white gold) Density of deposit 15.0 (yellow gold) - 19.0 g/cm3 (white gold) Voltage Medium voltage - high voltage Special storage conditions NoneShelf life Over 3 years Notes: none We strongly advise against the use of stainless steel anodes for most of our plating processes except for degreasing - activating and dechroming! Coating rates are calculated over a sample area that is permanently covered with a swab.

Chrome electrolyte - chrome plating with Betzmann Galvanik   Chrome plating by yourself with high-quality chrome electrolyte from Betzmann Galvanik  A layer of chromium protects a wide variety of components from oxidation and corrosion. In addition, the workpiece is given a visually appealing appearance. Our electrolyte is based on chrome(III). While chromium(VI) was originally used in the industrial process, chromium(III) electrolytes are increasingly being used because they have a significantly lower impact on man and nature. This electrolyte contains all our know-how - we were able to make it significantly brighter and more efficient. Current densities up to 20A/dm² can be achieved. Usually chrome is deposited in the layer system copper - nickel - chrome. The intermediate layer of nickel provides additional protection against corrosion, as chrome layers show microcracks. T   Of course, the chrome electrolyte is suitable for all processes such as bath electroplating and pen plating (or pad plating). When chromium plating, always wear the necessary protective equipment such as safety goggles, gloves and protective clothing and only work in a well-ventilated room.   Parameters (these may vary, please test): Bath electroplating: 1.5-6V (approx. 3V recommended at 10cm distance) pin plating: 3-7V (approx. 4-5V recommended) Current density: 4-24A/dm² (up to 50A/dm² with bath movement) Working temperature 20-50°C (25°C recommended) deposition rate: 0.06µm/min at 10A/dm²   The most important advantages at a glance:  is equally suitable for bath electroplating and pen plating / pad plating high adhesive strength and abrasion resistance high hardness up to 1200 HV extremely large current density range appealing optics Color of the chrome layer is very similar to the result of hexavalent chrome baths heating of the electrolyte is not necessary (temperature range 15-50°C, preferably 15-30°C) high reflection and beautiful gloss higher permissible metal impurities than with other processes, thus easier to use    To achieve a perfect result with the chrome electrolyte, the appropriate anodes are required for the galvanic process used. Anodes made of aluminum, platinized titanium, platinum or iridium are recommended. For pen plating, graphite, nickel or stainless steel anodes can be used if necessary. With nickel or stainless steel anodes, however, it is important to ensure that the pad is washed out well in between so that the metal contamination that arises does not contaminate the electrolyte and the chromium layer.   Aluminium anodes have proven to be particularly advantageous, they are particularly cost-effective and the electrolyte retains its excellent color. If you do not have any, we recommend that you order them directly from us.   Identification of the mixture: Chrome Electrolyte (contains chromium hydroxide sulfate, boric acid, ammonium chloride, ammonium formate) Signal word: Caution H-phrases: H317: May cause an allergic skin reaction. P phrases: P261: Avoid inhalation of aerosol. P280: Wear protective gloves / eye protection. P302 + P352: IF ON SKIN: Wash with plenty of water. P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. P101: If medical advice is needed, have container or label at hand. P102: Keep out of the reach of children.             

  Edelstahlelektrode 4mm - dünn, passend in unseren Handgriff:   Diese Elektrode ist in der Vielzahl von Fällen für alle Arbeitsschritte optimal geeignet.  Für die Benutzung der kleinen Pads und/oder Beschichtung kleiner Flächen wird i.d.R. der dünneAnodenstab  verwendet.   Edelstahl-Elektroden können bei anderen Beschichtungsprozessen eine Kontamination derBeschichtungslösung verursachen. Hier empfiehlt sich dann eine andere Art von Anodenstäben zubenutzen, z.B. die Graphitelektrode oder Platinelektrode.   Edelstahlelektrode: Länge ca. 9,5 cm, Durchmesser 4mm     Stainless Steel Electrode: This electrode is ideal for chrome stripping and electro-cleaning. To swap over to a stainless steel electrode, simply loosen the existing electrode using the allen key which comes free with the wand, and fit in the new one. Stainless steel electrodes should not be used for any other processes such as the metal can cause contamination of the plating solution resulting in considerable wastage of gold metal.  Selecting the best electrode for the job is very important.      

Platinum Electrolyte with 2 Gramm Platinum per Liter! Platinum Bath - Platinizing with Betzmann Electroplating    Platinum is characterized by high abrasion resistance and gives a noble gray surface. Alternative: White palladium   The platinum bath from Betzmann Galvanik deposits corrosion-resistant, very bright and shiny platinum layers up to a thickness of 0.5 - 1.0 µm. It is suitable for both decorative and technical applications and is very well suited for pin, bath and pad electroplating!..   Operating data: Platinum content: 2.0 g/L pH-value: <1 Density: 1.08 g/ml, increasing   Working conditions: Voltage: from 3 volts Bath temperature: 30 - 40 °C Exposure time: 2 - 4 min. Anode material: platinized titanium Anode/cathode surface: 1 : 1 Fabric movement: required Recommended speed: 2 - 8 cm/sec. Deposition rate: approx. 11 mg/Amin; approx. 0.5-1.5 A/dm2 Bath movement: recommended     Precipitation data: Hardness: 500 HV Layer thickness: max. 1.0 µm Fineness: 99,9%   Delivery form: Ready to use 2 g/L Pt       Features Applications High concentration of platinum – 2 grams per litre Suitable for brush plating both decorative and functional items such as jewellery and electrical connectors     Operating Conditions and Deposit Data Voltage Range 3.0 – 5.0 volts Temperature 20 – 25 °C (25 °C preferred) Platinum concentration 2 g/l Electrode Platinum - Carbon Platinum content in plate Above 99.9% Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.25 micron per minute (spot) – see notes) Hardness 405 Hv Density of deposit 21.4 g/cm3 Electrical resistivity of deposit 9.8 micro ohms/cm Stress Not determined Special storage requirements None Shelf life Over 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) 2796   Notes: We strongly advise against the use of stainless steel anodes for most of our plating processes. Higer voltages give greater plating rates, however more gas is liberated and a mist mask is recommended. Plating rates are calculated over a sample area which is permanently covered by swab. Will plate directly onto freshly prepared nickel or stainless steel. Hazard statements H314 Causes severe skin burns and eye damage. Precautionary statements P280 Wear protective gloves/protective clothing/eye protection/face protection. P302 IN CASE OF CONTACT WITH SKIN: P352 Wash with plenty of water. P332 If skin irritation occurs: P313 Get medical advice/attention. P362 Take off contaminated clothing.