Copper Plate Electrode (SW10051M) Short Description The Copper Plate Electrode is a large‑area sacrificial anode made from high‑purity copper (≥ 99.9 %) designed for electroplating. It provides a consistent supply of copper ions to the electrolyte, promoting stable baths, uniform deposits and improved conductivity in copper plating applications.  Product Description This plate is manufactured from pure copper, which dissolves evenly into the electrolyte to maintain a consistent metal ion concentration. The flat, broad surface makes it ideal for covering larger workpieces or for use in plating tanks where even current distribution is critical to achieving high‑quality copper coatings. Copper anodes like this plate are typically used in bath electroplating settings and can also serve as a foundation layer before other coatings such as nickel or chrome are applied. Typical Applications Electroplating of copper on metal substrates Bath plating for decorative or functional copper layers Undercoat / intermediate layer before nickel or chrome plating Workshop, lab and production electroplating Applications involving larger workpieces requiring extensive coverage  Key BenefitsCopper Sacrificial Anode Sheet Plate anode made of pure copper for electroplating Sacrificial anode for electrolytic copper plating Copper anode sheet for acidic copper electrolytes, copper (Cu) min. 99.9% (Cu-DHP, CW024A, 2.0090, SF-Cu) Electrolytically deposited copper is used to improve conductivity due to its excellent electrical properties, as well as a barrier layer prior to nickel and chrome plating of steel surfaces to enhance corrosion resistance, and for pre-copper plating of zinc die-castings Sheetthickness 0.7 mm Available in sizes S (25 x 150 mm), M (50 x 80 mm), L (100 x 150 mm), and XL (170 x 200 mm) Custom cuts and sheet thicknesses of 1.0 and 2.0 mm also available upon request (min. 1 m²)Size: L - 100 x 150 mmM - 50 x 80 mmS - 25 x 150 mmXL - 170 x 200 mmMaterial: Copper Thickness: 0.7 mm, 1 mm, 2 mm Purity: 99.9  High copper purity (≥ 99.9 %): clean ion release for consistent baths Broad plate design: promotes uniform current distribution Improved deposit quality: even, durable copper coatings Flexible use: suitable for a range of plating setups Easy integration: fits naturally into standard bath electroplating processes  Usage Instructions Preparation: Thoroughly clean and degrease all workpieces prior to plating. Placement: Position the copper plate electrode as the anode (positive terminal) in the electrolyte. Connect: Attach the electrode to the positive output of your power supply and the workpiece to the negative (cathode). Plating: Adjust voltage and current according to the specific copper electrolyte used. Maintenance: Periodically clean off any buildup to maintain performance and longevity. Conclusion The Copper Plate Electrode is a reliable, versatile accessory for copper electroplating, offering consistent performance and uniform deposition thanks to its large active surface and high material purity — suitable for hobbyists, workshop use and professional electroplating environments alike.

Bright Acid Copper Electrolyte – Ready-to-Use Copper Plating Solution for Tank, Pen & Brush PlatingProfessional Bright Copper Electrolyte for Brilliant, Smooth and Highly Conductive Copper CoatingsThe Bright Acid Copper Electrolyte from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for producing brilliant, smooth and highly adherent copper coatings. Its excellent leveling properties and high deposition rate make it ideal for both decorative and technical electroplating applications.The electrolyte produces bright copper deposits with outstanding surface quality, often eliminating the need for extensive polishing. It is perfectly suited for tank plating, pen plating and brush plating, delivering professional results for workshops, jewellery manufacturers, restoration specialists and industrial applications.Your AdvantagesReady-to-use bright acid copper electrolyteBrilliant, high-gloss copper finishHigh deposition rateExcellent leveling propertiesUniform coating thicknessOutstanding adhesionHighly conductive copper depositsExcellent ductilityEasy to polishIdeal base layer for precious metal platingSuitable for tank, pen and brush platingProfessional quality from Betzmann GalvanikTypical ApplicationsPerfect for:Jewellery manufacturingJewellery repairWatchmakingElectronicsPrinted circuit boards (PCB)Electrical contactsDecorative metal finishingMetal restorationAutomotive partsClassic car restorationMechanical engineeringModel makingPrototype manufacturingIndustrial electroplatingWhy Copper Plate?Copper is one of the most important metals used in electroplating. It serves as an excellent intermediate layer, improves adhesion between different metals, and provides outstanding electrical and thermal conductivity.Bright copper coatings are commonly used for:Decorative finishesCorrosion protection systemsElectrical conductivityThermal conductivitySurface levelingIntermediate layers before further platingThe excellent leveling capability helps fill minor surface imperfections, resulting in smoother finishes and significantly reducing polishing time.Ideal Base Layer for Gold, Silver, Nickel and ChromiumBright copper is frequently used as the first layer in high-quality multilayer electroplating systems.Typical coating systems include:Copper → Nickel → GoldorCopper → Nickel → ChromiumThe nickel layer acts as a diffusion barrier, preventing copper migration into precious metal coatings and ensuring long-lasting colour stability and corrosion resistance.Suitable Base MaterialsSuitable for direct plating on acid-resistant metals such as:CopperBrassBronzeNickelNickel-plated surfacesSteel, iron and zinc should first receive an alkaline copper strike before applying the bright acid copper layer.Not suitable for direct plating on:AluminiumTitaniumChromiumTinZincThese materials require appropriate pretreatment.ApplicationFor optimum adhesion, all workpieces should be thoroughly cleaned, degreased and, where required, activated before plating.The use of a Copper Anode is recommended to maintain a constant copper concentration and maximise electrolyte life.Technical SpecificationsElectrolyte DataReady-to-use bright acid copper electrolytepH value: approx. 1Operating temperature: 15–40 °CRecommended Operating ConditionsCurrent density: 2.5–5 A/dm²Up to 7 A/dm² with solution agitationTank plating:Approx. 1.1 Volts (5 cm electrode distance)Approx. 1.7 Volts (10 cm electrode distance)Approx. 2.8 Volts (20 cm electrode distance)Pen & Brush plating:1.2–4.5 VoltsRecommended: Approx. 3 VoltsPlating time: 3–30 minutesDeposition rate: Approx. 1 µm/min at 5 A/dm² and 20 °CAnode material: Copper AnodeCoating PropertiesBrilliant bright copper finishExcellent levelingUniform coating thicknessOutstanding adhesionExcellent ductilityHigh electrical conductivityHigh thermal conductivityExcellent polishing characteristicsIdeal base layer for nickel, chromium, gold, silver and palladium platingSupplied AsReady-to-use Bright Acid Copper ElectrolyteAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops premium electroplating solutions for decorative and technical surface finishing. The Bright Acid Copper Electrolyte combines excellent leveling properties, a high deposition rate and brilliant surface quality, making it the perfect choice for professional copper plating as well as a base layer for nickel, chromium, gold, silver and palladium coatings.

Silver Electrolyte 30 g/L – Premium Silver Plating Solution for Tank, Pen & Brush PlatingProfessional Silver Electrolyte for Bright, Conductive and High-Quality Silver CoatingsThe Silver Electrolyte 30 g/L from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for depositing high-purity silver coatings on conductive metal surfaces. With a silver concentration of 30 grams per litre, this electrolyte provides fast deposition rates, brilliant finishes and outstanding electrical conductivity.The electrolyte is suitable for tank plating, pen plating and brush plating (swab plating), delivering professional results for both decorative and technical applications. Whether you are plating jewellery, electronic components, electrical contacts, cutlery or restoration projects, this silver plating solution produces uniform, highly adherent and durable silver deposits.Your Advantages at a Glance30 g of silver per litreReady-to-use professional electrolyteSuitable for tank plating, pen plating and brush platingBright, uniform silver depositsOutstanding electrical and thermal conductivityExcellent adhesionEven metal depositionSuitable for decorative and technical applicationsIdeal for hobbyists, workshops and industrial usersPremium quality from Betzmann GalvanikWhy Electroplate with Silver?Silver offers the highest electrical conductivity of all metals, combined with excellent thermal conductivity and an attractive bright white appearance. It is one of the most widely used precious metals in electroplating for both decorative and functional applications.Silver plating is commonly used for:Decorative finishesElectrical contactsPrinted circuit boards (PCBs)Connectors and terminalsJewelleryWatchesCutleryMusical instrumentsPrecision componentsRestoration workIn addition to its elegant appearance, a silver coating significantly improves conductivity while providing excellent wear resistance and protection against oxidation.Suitable Base MaterialsThe Silver Electrolyte is suitable for plating:CopperBrassBronzeNickelSteel (with appropriate pre-treatment)Stainless steel (after Nickel Strike activation)SilverCopper-plated componentsDepending on the substrate, we recommend using the appropriate activator or intermediate layer to achieve maximum adhesion.Recommended Plating StructureFor maximum durability and long-term colour stability, the following plating sequence is recommended:Base Material → Copper → Nickel → SilverThe nickel layer acts as a diffusion barrier, preventing copper migration into the silver coating and ensuring a bright, tarnish-resistant finish.Typical ApplicationsIdeal for:Jewellery manufacturingJewellery repairWatchmakingElectronicsPrinted circuit boards (PCBs)Electrical contactsConnectorsMusical instrumentsRestorationClassic carsModel makingLaboratoriesIndustrial electroplatingProfessional metal finishingApplicationBefore silver plating:Thoroughly clean and degrease the workpiece.Remove all oxide layers.Activate the surface according to the base material.During plating:For tank plating, immerse the workpiece completely in the electrolyte.For pen plating or brush plating, keep the electrode moving continuously across the surface to ensure uniform metal deposition.After plating, rinse the workpiece thoroughly with clean water and dry completely.Technical SpecificationsSilver concentration: 30 g/LOperating temperature: 15–30 °CpH value: Slightly acidic to neutralCurrent density: 0.5–3 A/dm²Tank plating voltage: Approx. 1.5–3.5 VPen & brush plating voltage: Approx. 3–7 VRecommended anodes: Platinum, graphite or silverCoating thickness: Approx. 1–5 µm (depending on plating time)Deposit purity: >99.9% silverThe above parameters are recommended values and may vary depending on workpiece geometry, electrode spacing and plating equipment.Safety InformationWear protective gloves and safety goggles.Avoid skin and eye contact.Use only in well-ventilated areas.Keep out of reach of children.Always follow the Safety Data Sheet (SDS).Quality from Betzmann GalvanikThe Silver Electrolyte 30 g/L from Betzmann Galvanik has been developed to meet the highest standards in modern electroplating. Its high silver concentration, excellent conductivity and easy handling make it ideal for decorative silver plating as well as demanding industrial applications. Combined with Betzmann Galvanik power supplies, electrodes and accessories, it delivers brilliant, durable and professional silver finishes every time.

Palladium Plating Solution – Ready-to-Use Weak Alkaline Palladium Electrolyte (10.0 g/L Pd)Professional Palladium Electrolyte for Bright, Decorative and Technical Palladium CoatingsThe Palladium Plating Solution is a high-quality, ready-to-use weak alkaline palladium electrolyte designed for depositing bright, high-gloss, and decorative palladium coatings.This professional electrolyte has been specifically developed for demanding applications requiring an attractive finish, outstanding durability, and reliable coating performance. The deposited palladium layers can be used both as a diffusion barrier layer and as a final decorative coating.With a palladium content of 10.0 g/L Pd, this high-performance electrolyte is ideally suited for professional applications in the jewelry industry, eyewear manufacturing, electroplating, and industrial surface finishing.The deposited palladium coating features a bright, premium precious metal appearance with a purity of 99.9% palladium, offering excellent chemical resistance, corrosion resistance, and mechanical durability.ApplicationsThe Palladium Plating Solution is ideal for:Jewelry componentsRingsNecklacesBraceletsPendantsWatches and watch componentsEyewear framesDecorative metal surfacesTechnical componentsPrecious metal intermediate layersDiffusion barrier coatingsPremium protective coatingsIdeal for:JewelersGoldsmithsEyewear manufacturersElectroplating specialistsIndustrial manufacturersSurface finishing companiesProfessional usersProduct AdvantagesReady-to-use palladium plating electrolyteHigh palladium concentration: 10.0 g/L PdBright, high-gloss palladium coatingsSuitable for decorative and technical applicationsIdeal as a diffusion barrier layerExcellent chemical and corrosion resistanceOutstanding surface qualityUniform and reliable palladium depositionHigh-purity palladium coatingProfessional quality for demanding electroplating applicationsSuitable Base MaterialsThe Palladium Plating Solution is suitable for a wide range of metallic substrates and electroplated surfaces.Suitable base materials include:GoldSilverCopperBrassNickelStainless steelSuitable electroplated intermediate layersFor optimum adhesion and long-lasting coating performance, all workpieces must be thoroughly cleaned, degreased, and activated prior to plating.Depending on the substrate and application, an appropriate intermediate or bonding layer may be recommended.Technical SpecificationsProduct TypeWeak Alkaline Palladium Plating ElectrolytePalladium Content10.0 g/L PdpH Value8.5 (Operating Range: 8.0–9.0)DensityDepending on concentration and bath conditionRecommended Operating ConditionsParameterValueVoltage1.8–2.5 VBath Temperature25–30 °CPlating Time3–8 minutesAnode MaterialGraphite or Platinum ElectrodesAnode/Cathode Surface RatioApprox. 1:1Workpiece MovementRequiredCurrent DensityApprox. 0.5 A/dm²Deposition RateDepending on process parametersBath FiltrationRecommended for baths of 10 liters or morePalladium Deposit PropertiesThe deposited palladium coating provides:Bright, high-gloss surface finishPremium precious metal appearanceExcellent chemical resistanceGood wear resistanceReliable diffusion barrier propertiesHigh-quality decorative finishTypical Deposit DataHardness: Approx. 230–250 HVMaximum coating thickness: Up to 0.5 µmPalladium purity: 99.9%Processing InformationProper surface preparation is essential for achieving high-quality palladium coatings. Before electroplating, all workpieces must be thoroughly cleaned, degreased, and activated.Maintaining the recommended operating parameters—including voltage, bath temperature, current density, and plating time—ensures consistent deposition and optimum coating quality.Variations from the recommended operating conditions may affect the brightness, structure, and performance of the deposited palladium coating.Delivery FormReady-to-use Palladium Plating SolutionPalladium concentration: 10.0 g/L PdQuality from Betzmann GalvanikBetzmann Galvanik develops and supplies professional electroplating solutions for demanding decorative and technical surface finishing applications.Our precious metal electrolytes are trusted by jewelers, manufacturers, electroplating professionals, and industrial customers worldwide for their consistent quality, excellent process stability, and reliable performance.The Palladium Plating Solution from Betzmann Galvanik delivers premium-quality palladium coatings for decorative finishes, diffusion barrier layers, and advanced technical applications.

Metal Polish Ultra-Fine – The Perfect Pre-Treatment for Premium Surface Quality For applications demanding extremely high surface quality and brilliant shine: Metal Polish Ultra-Fine is the top choice for final pre-treatment before electroplating. Ultra-Fine Cleaning Power – Ideal for Sensitive Surfaces This finely tuned formulation gently yet effectively removes: the most delicate silicone and release agent residues ultra-thin wax layers micro-contaminants and particles light oxides and adhesion inhibitors The built-in cleaner delivers deep surface cleanliness – the optimal base for uniform, high-adhesion plating layers. Brilliant, Smooth, Flawless – Even on Sensitive Materials Used with a fine microfiber cloth, this ultra-fine polish will: restore mirror-like shine to chrome and metal bring conductive plastics to a glossy, refined finish refresh used components with an elevated appearance smooth fine details and delicate contours Sensitive parts are treated gently while achieving an exceptionally even finish. Key Benefits at a Glance Ultimate pre-treatment for bath, brush, and swab plating Removes the finest residues and prepares ideal adhesion surfaces Highest level of surface quality and brilliance Suitable for metals, chrome, and conductive plastics Easy and controlled application Designed for workshop, professional labs, and industrial environments Result: Technically pristine, high-gloss surfaces with optimal adhesion and a flawless professional finish.

Aluminium Activator / Aluminium Pretreatment – Preparation for Electroplating Aluminium SurfacesProfessional Aluminium Pretreatment for Galvanic Coating of AluminiumThe Aluminium Activator from Betzmann Galvanik has been specially developed to prepare aluminium surfaces for subsequent electroplating processes.Because aluminium forms a natural oxide layer on its surface, direct electroplating is difficult. This pretreatment first creates a firmly adhering zinc layer on the aluminium surface. This zinc layer then serves as a base for further electroplating processes, for example with an alkaline copper electrolyte.The optimized low-viscosity formulation offers significant advantages compared to conventional aluminium activators and enables reliable processing even on complex aluminium components.Your AdvantagesSpecially developed for the electroplating pretreatment of aluminiumCreates an adherent zinc layer on aluminiumEnables subsequent electroplating processesIdeal preparation for alkaline copper electrolytesReduced viscosity for improved application propertiesLower chemical lossesLess solution entrapment in porous aluminium castingsFaster zinc depositionImproved process safety on aluminium alloysSuitable for demanding aluminium componentsWhy Activate Aluminium Before Electroplating?Aluminium quickly forms a stable oxide layer on its surface. This oxide layer prevents direct and permanent electroplating.The aluminium activation process:Removes the oxide layerDeposits a thin zinc layerCreates an adhesive surface for further coatingsAfter this pretreatment, aluminium can be reliably coated with additional electroplated layers.Typical coating system:Aluminium → Aluminium Activator (Zinc Layer) → Alkaline Copper → Nickel → Gold / Chromium / Precious MetalsTypical ApplicationsSuitable for:Aluminium componentsAluminium alloysAluminium castingsMachine componentsAutomotive partsModel makingRestoration workTechnical coatingsDecorative surface finishingEspecially suitable for aluminium alloys containing:MagnesiumSiliconAdvantages of the Low-Viscosity FormulationThe specially developed low viscosity provides important advantages:Reduced Solution Entrapment in Porous Cast StructuresWith conventional, higher-viscosity solutions, the chemical may penetrate into pores and capillaries of aluminium cast parts. This can later cause problems such as blistering or defects in subsequent coatings.The low-viscosity formulation significantly reduces this effect.Lower Chemical ConsumptionImproved wetting and reduced solution carry-over result in lower chemical losses, especially with:Complex component geometriesPorous cast surfacesDifficult workpiece shapesFaster DepositionThe optimized composition enables efficient and uniform zinc deposition on aluminium surfaces.Application InstructionsBefore activation, the aluminium surface must be thoroughly cleaned and degreased.For optimum results:Completely remove grease and contaminationRemove oxide layersDo not touch the cleaned surface with bare handsContinue with the next plating step immediately after activationAfter zinc activation of the aluminium surface, further coating is preferably carried out with an alkaline copper electrolyte.Technical PropertiesProcess: Aluminium zinc pretreatmentPurpose: Creation of a galvanically suitable zinc intermediate layerSubsequent layer: Alkaline copperSuitable for aluminium and aluminium alloysSupplied AsReady-to-use aluminium activator / pretreatment solutionAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops professional solutions for demanding electroplating applications. The Aluminium Activator enables reliable preparation of aluminium surfaces for high-quality electroplating processes and creates the essential foundation for durable, decorative and technical coatings.

Copper Electrode Ø 6 mm – High-Purity Copper Anode for Professional ElectroplatingEfficient Copper Plating with a High-Quality Copper ElectrodeThe Copper Electrode Ø 6 mm is manufactured from 99.9% pure copper and has been specially designed for use in tank plating, pen plating and brush (tampon) plating. It provides a continuous and uniform supply of copper ions to the electrolyte, ensuring high-quality, even and strongly adherent copper deposits.Using a copper anode maintains a constant copper concentration in the electrolyte. This improves coating quality, increases process stability and reduces electrolyte consumption.Your AdvantagesManufactured from 99.9% pure copperExcellent electrical conductivityUniform release of copper ionsMaintains a constant copper concentration in the electrolyteFaster and more uniform copper depositionReduces electrolyte consumptionImproves coating qualitySuitable for tank plating, pen plating and brush platingFits standard 6 mm electrode holdersProfessional quality from Betzmann GalvanikWhy Use a Copper Electrode?During electroplating, copper is continuously deposited from the electrolyte onto the workpiece. A copper electrode replenishes the copper ions consumed during the plating process.This provides several important benefits:Stable electrolyte compositionMore uniform coatingsHigher deposition efficiencyLonger electrolyte service lifeLower operating costsTypical ApplicationsIdeal for:Copper electroplatingTank platingPen platingBrush (tampon) platingDecorative copper coatingsTechnical copper coatingsCorrosion protection systemsIntermediate layers before nickel, gold, silver or chromium platingWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from 99.9% pure copper and offers:Excellent electrical conductivityUniform dissolution in the electrolyteHigh purityMinimal electrolyte contaminationLong service lifeApplication InstructionsBefore plating:Thoroughly clean the workpieceRemove grease and oilRemove oxides and contaminantsDuring electroplating:Connect the copper electrode as the anode (positive terminal)Connect the workpiece as the cathode (negative terminal)Use a suitable copper electrolyteFollow the recommended voltage and current settings for the electrolyteOccasional cleaning of the electrode is recommended to maintain optimum performance.Technical SpecificationsMaterial: 99.9% pure copperDiameter: 6 mmExcellent electrical conductivitySuitable for standard electrode holdersPackage Contents1 × Copper Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Copper Electrode Ø 6 mm ensures a reliable supply of copper ions and consistently produces uniform, high-quality copper coatings for hobbyists, workshops and industrial users.

Palladium Plating Solution – Ready-to-Use Weak Alkaline Palladium Electrolyte (2.0 g/L Pd)Professional Palladium Electrolyte for Bright, Decorative and Technical Palladium CoatingsThe Palladium Plating Solution is a high-quality, ready-to-use weak alkaline palladium electrolyte designed for the deposition of bright, smooth, and decorative palladium coatings.This professional electrolyte has been developed for demanding applications where excellent surface appearance, high durability, and reliable coating performance are required. The deposited palladium layers can be used both as a diffusion barrier layer and as a final decorative coating.With a palladium content of 2.0 g/L Pd, this electrolyte is ideal for applications in the jewelry industry, eyewear industry, electroplating technology, and technical surface finishing.The deposited palladium coating offers a bright appearance, excellent purity of 99.9% palladium, and outstanding chemical and mechanical resistance.ApplicationsThe Palladium Plating Solution is suitable for:Jewelry componentsRingsNecklacesBraceletsPendantsWatches and watch partsEyewear framesDecorative metal surfacesTechnical componentsPrecious metal intermediate layersDiffusion barrier coatingsIdeal for:JewelersGoldsmithsEyewear manufacturersElectroplating specialistsIndustrial manufacturersSurface finishing companiesProfessional usersProduct AdvantagesReady-to-use palladium plating electrolytePalladium concentration: 2.0 g/L PdBright and high-gloss palladium coatingsSuitable for decorative and technical applicationsCan be used as a diffusion barrier layerExcellent chemical resistanceHigh-quality surface finishUniform palladium depositionHigh purity palladium coatingProfessional electroplating qualitySuitable Base MaterialsThe Palladium Plating Solution can be used on various metallic substrates and galvanically pre-treated surfaces.Suitable materials may include:GoldSilverCopperBrassNickelStainless steelSuitable electroplated intermediate layersFor optimum adhesion and long-lasting coating performance, proper surface preparation is essential. Workpieces must be thoroughly cleaned, degreased, and activated before plating.Technical SpecificationsProduct TypeWeak Alkaline Palladium Plating ElectrolytePalladium Content2.0 g/L PdpH Value8.5 (operating range: 8.0–9.0)Density1.075 g/ml (1.070–1.080 g/ml)Recommended Operating ConditionsParameterValueVoltage1.8–2.5 VBath Temperature25–30 °CPlating Time3–8 minutesAnode MaterialGraphite or Platinum ElectrodesAnode/Cathode Surface RatioApprox. 1:1Workpiece MovementRequiredCurrent DensityApprox. 0.5 A/dm²Deposition RateApprox. 15.6 mg/AminDeposition SpeedApprox. 0.07 µm/min depending on pH value and current densityBath FiltrationRecommended from 10 litersPalladium Deposit PropertiesThe deposited palladium coating provides:Bright and attractive surface finishDecorative precious metal appearanceExcellent chemical resistanceGood wear resistanceReliable diffusion barrier propertiesHigh-quality final coatingDeposit Data:Hardness: approx. 230–250 HVMaximum coating thickness: up to 0.5 µmPalladium purity: 99.9%Processing InformationProfessional surface preparation is essential for achieving high-quality palladium coatings. Before electroplating, all parts must be thoroughly cleaned, degreased, and activated.Maintaining the recommended process parameters, including voltage, temperature, current density, and plating time, ensures uniform deposition and optimum coating quality.Variations from the recommended operating conditions may influence the brightness, structure, and properties of the deposited palladium layer.Delivery FormReady-to-use Palladium Plating SolutionPalladium concentration: 2.0 g/L PdQuality from Betzmann GalvanikBetzmann Galvanik provides professional solutions for electroplating and advanced surface finishing applications. Our precious metal electrolytes are developed for demanding customers in jewelry manufacturing, industry, technology, and research.With high-quality products, technical expertise, and reliable process solutions, Betzmann Galvanik supports customers worldwide in producing premium precious metal coatings.The Palladium Plating Solution from Betzmann Galvanik provides a professional solution for decorative palladium finishes as well as technical protective and diffusion barrier coatings.

White Bronze Mixer BMG-117.2 – Additive for White Bronze Electroplating Additive for Producing Bright White Bronze Coatings The White Bronze Mixer BMG-117.2 from Betzmann Galvanik is a specially formulated electroplating additive for use with an alkaline copper electrolyte. When combined with a suitable alkaline copper plating solution, it allows you to prepare a White Bronze plating bath for depositing bright, light-coloured bronze coatings on electrically conductive metal surfaces. White Bronze provides a bright metallic appearance combined with good corrosion, abrasion and chemical resistance. Depending on the application, it can also be used as a nickel-free alternative to conventional nickel coatings. Your Advantages at a Glance Additive for producing White Bronze plating electrolytes Designed for use with alkaline copper electrolytes Produces bright, metallic White Bronze coatings High deposition rate, depending on process parameters Good corrosion resistance Good wear and abrasion resistance Good chemical resistance Nickel-free plating option Suitable for decorative and functional applications Suitable for tank plating, pen plating and tampon/brush plating Mixing ratio can be adjusted to influence the resulting colour and coating characteristics What Is the White Bronze Mixer? The White Bronze Mixer is an additive, not a standalone copper electrolyte. It is added to a suitable alkaline copper plating electrolyte. The combination creates an active plating solution capable of depositing a bright White Bronze alloy onto electrically conductive workpieces. This makes it possible to adapt an existing suitable alkaline copper system for White Bronze electroplating. Recommended Mixing Ratio As a starting formulation, use: 1 part White Bronze Mixer : 1 part alkaline copper electrolyte Mix both components thoroughly before use. Depending on the desired colour tone and plating result, other mixing ratios can also be tested. For new applications, we recommend starting with a small test bath and evaluating the result on a test workpiece before preparing larger quantities. How to Use the White Bronze Mixer 1. Prepare the alkaline copper electrolyte Prepare a suitable alkaline copper electrolyte according to its manufacturer's instructions. 2. Add the White Bronze Mixer Add the White Bronze Mixer gradually to the copper electrolyte. As a starting formulation, use a 1:1 mixing ratio. 3. Mix thoroughly Mix the solution thoroughly to ensure that the components are evenly distributed. 4. Electroplate The prepared solution can then be used to deposit a bright White Bronze coating. 5. Rinse the workpiece After plating, rinse the workpiece thoroughly with water and dry it carefully. Suitable for Tank, Pen and Tampon Plating The White Bronze Mixer can be used for different electroplating processes, including: Tank plating Pen plating Tampon plating Brush plating Selective electroplating Repair plating This makes the system suitable for both larger components and local plating of small or difficult-to-reach areas. Applications White Bronze is particularly suitable for: Decorative metal components Jewellery Accessories Metal fittings Technical components Restoration Repair plating Decorative surfaces Functional coatings Nickel-free coating systems Intermediate or barrier layers before further plating The bright metallic appearance makes White Bronze especially attractive for decorative applications. White Bronze as a Nickel Alternative One of the key advantages of White Bronze is the possibility of producing a nickel-free electroplated surface. The deposited coating provides a bright metallic appearance together with good resistance to corrosion and wear. For suitable applications, White Bronze can therefore be an interesting alternative to conventional nickel plating. Important: Whether White Bronze is suitable as a direct replacement for nickel depends on the specific requirements regarding colour, hardness, corrosion resistance, wear resistance and applicable regulations. Adjusting the Colour One advantage of the system is the ability to influence the final colour and coating characteristics through the mixing ratio and process parameters. In addition to the recommended 1:1 starting ratio, other ratios can be tested for specific colour requirements. Process parameters such as voltage, temperature, current density and electrolyte movement can also affect the final result. For repeatable production results, the selected parameters should be kept as consistent as possible. Technical Specifications PropertySpecificationProductWhite Bronze MixerProduct numberBMG-117.2Product typeElectroplating additiveApplicationAdditive for alkaline copper electrolytesRecommended starting ratio1:1PurposeProduction of White Bronze plating bathsProcessesTank, pen and tampon/brush platingCoating appearanceBright / metallicStorageCool, dry and tightly closed The optimum dosage depends on the copper electrolyte used, the desired colour and the selected plating parameters. Application Tip When preparing a new White Bronze bath, we recommend making a small test batch first. This allows you to optimize the mixing ratio and plating parameters for your particular workpiece and desired colour before preparing larger quantities. For decorative applications, always evaluate the result on a test piece first. Safety Information The White Bronze Mixer is a chemical electroplating additive. When handling the product: Wear suitable protective gloves Wear safety goggles Wear appropriate protective clothing Avoid skin and eye contact Do not inhale vapours or aerosols Work in a well-ventilated area Do not ingest Keep out of reach of children Dispose of chemical residues according to applicable regulations Always consult the current Safety Data Sheet (SDS) before use. Conclusion The White Bronze Mixer BMG-117.2 is a versatile additive for producing bright White Bronze plating baths based on an alkaline copper electrolyte. With a recommended starting ratio of 1:1, it can be used to prepare White Bronze solutions for tank plating, pen plating and tampon/brush plating. The resulting coatings offer a bright metallic appearance together with good corrosion and wear resistance and can, depending on the application, provide an interesting nickel-free plating alternative.

Copper Alligator Clip – Soft Negative Contact Clamp for Professional ElectroplatingPremium Copper Alligator Clip for Secure and Gentle Electrical Contact During ElectroplatingThe Copper Alligator Clip BMG-019A has been specifically developed for professional use in tank plating, pen plating, and brush plating applications. Designed exclusively as a negative contact clamp (cathode connection), it provides a secure electrical connection to the workpiece while minimizing the risk of surface damage.Manufactured from high-purity copper, the clip offers outstanding electrical conductivity with very low contact resistance, ensuring stable current transfer and consistent electroplating results. The soft copper jaws help protect delicate surfaces by significantly reducing the risk of scratches or pressure marks during clamping.Unlike zinc-plated steel clamps, the Copper Alligator Clip is rust-proof, zinc-free, and corrosion-resistant, eliminating the risk of zinc contamination of the electrolyte or workpiece. This makes it particularly suitable for high-quality precious metal plating processes such as gold plating, silver plating, rhodium plating, palladium plating, platinum plating, and ruthenium plating.Its robust copper construction also provides an exceptionally long service life and can last up to 200 times longer than conventional coated alligator clips under normal electroplating conditions.ApplicationsThe Copper Alligator Clip is ideal for:Tank PlatingPen PlatingBrush PlatingGold PlatingSilver PlatingRhodium PlatingPalladium PlatingPlatinum PlatingRuthenium PlatingCopper PlatingNickel PlatingChromium PlatingCobalt PlatingDecorative electroplatingSelective platingRepair platingSuitable for:JewelersGoldsmithsJewelry manufacturersElectroplating companiesWatchmakersLaboratoriesIndustrial applicationsProfessional workshopsHobby usersProduct BenefitsDesigned specifically as a negative contact clampManufactured from high-purity copperExcellent electrical conductivityVery low contact resistanceSoft copper jaws protect delicate surfacesMinimizes scratches and pressure marksRust-proofZinc-free constructionNo risk of zinc contaminationExtremely durableUp to 200 times longer service life than conventional coated clampsSuitable for all professional electroplating applicationsWhy Use a Copper Contact Clamp?Reliable electrical contact is essential for achieving high-quality electroplated coatings.The Copper Alligator Clip provides:Stable current transferExcellent coating adhesionUniform coating thicknessConsistent plating resultsMinimal electrical lossesGentle workpiece handlingClean precious metal deposits without zinc contaminationBy attaching the clip to a hidden or non-visible area of the workpiece, the contact mark can be kept virtually invisible after plating.Typical ApplicationsIdeal for connecting:JewelryRingsNecklacesPendantsBraceletsEarringsWatch casesEyewear framesCoinsMedalsPrecision componentsPrototype partsEngineering componentsDecorative metal partsCompatibilityThe Copper Alligator Clip is compatible with virtually all electroplating systems and laboratory power supplies.Ideal for use with:Electroplating power suppliesConnection cablesElectrode holdersGraphite electrodesPlatinum electrodesTank plating systemsPen plating systemsBrush plating systemsQuality from Betzmann GalvanikBetzmann Galvanik supplies premium electroplating accessories for professional users worldwide. Our copper alligator clips are manufactured from high-quality copper to provide outstanding conductivity, excellent durability, and reliable long-term performance. They ensure secure electrical contact and help produce consistent, professional electroplating results for jewelry manufacturing, industrial finishing, and laboratory applications.