Stainless Steel Electrode 4mm
€7.00
Available, delivery time: 1-2 days
Product information "Stainless Steel Electrode 4mm"
Stainless steel electrode 4 mm
This electrode is ideal for most applications in a wide range of situations.
It is mainly used for degreasing, activating, and dechromating, but is also very well suited for chromating. Important! Stainless steel electrodes can cause contamination of the coating solution in other coating processes. In this case, it is recommended to use a more suitable anode, e.g., made of graphite or platinum.
Stainless steel electrodes are suitable for chrome plating, and aluminum electrodes are ideal.
For gold plating, use a graphite or platinum electrode.
For silver plating, use a graphite or silver electrode.
Length: 9.5 cm, diameter 6 mm.
The thin sleev is suitable for this purpose.
Similar Items
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.
Sleeve - Swab - Anode fabric pad - Anode covers, thick, multi-layered - Replacement covers for pad electroplating from Betzmann Galvanik This thick, very robust anode fabric pad consists of several layers of fabric sewn together and is ideal for coating any surface. It does not wear out so quickly, especially on rough or coarse surfaces. At the lower end there are 2 insertion holes for the anode rod up to 6mm (for 8mm you can enlarge the holes with scissors or a knife. If this has already worked its way through the fabric at the top, you can continue to use the anode fabric pad by inserting it into the other insertion hole. Please soak the pad thoroughly before use, otherwise it will not conduct. Scope of delivery: 1 piece!
The perfect storage cup for electrode and cloth pad transparent with black lid Large storage beaker - Betzmann Galvanik This stable beaker with screw cap made of PET holds approx. 370 ml. It is practical for storing the electrode with the fabric pad in the respective electrolyte. On request, you will receive the appropriate labeling for the material to be stored. PET can with screw cap clear - 370 ml with plastic screw cap black 70 mm
Electrode handle - anode holder - grip - Electrode holder with insulated knurled screw - anode holder for faster electrode replacement The electrode handle/anode holder made of high-quality brass - insulated - is used to operate the various electrodes required for coating. Choosing the best electrode for the job is very important. The electrode is fixed in the front of the handle using a knurled screw. Holds electrodes up to 6 mm! Base material brass - hexagonal - light and easy to handle