Storage cup for Deluxe Plater

Storage cup for the professional coating machine 50 Ampere Betzmann Galvanoshop:    This stable cup with screw cap fits perfectly into the holder of the professional electroplating unit. Capacity 300 ml. On request, you will receive the appropriate labelling for the material to be stored.   

Stainless Steel Electrode 6mm:   This electrode is ideal for chrome stripping and electro-cleaning. To swap over to a stainless steel electrode, simply loosen the existing electrode and fit in the new one.  Stainless steel electrodes should not be used for any other processes such as the metal can cause contamination  of the plating solution resulting in considerable wastage of gold metal.    Selecting the best electrode for the job is very important.  

Graphite round rod - Graphite rod anode - Graphite electrode for gold plating.  Graphite electrodes are ultimate for all coatings. The advantage is that in some coatings with stainless steel electrodes, the dislodged metal parts disturb the coating. This does not happen with graphite electrodes, because graphite also filters out contaminated liquids. With bath electroplating, they also need to be replaced occasionally as they slowly dissolve during the plating process.   With pad electroplating, simply loosen the screw on the handle and replace with a new one.   Diameter 6 mm, length approx. 9 cm    Features Used for Doesn’t contaminate Cleaner Activating and electro-cleaning  Its resistive properties help to heat the solution you’re plating with Chromium plating, which needs to be plated at 25 degrees celsius; its natural heating action helps to maintain the solution’s optimal temperature Low cost Can be used for all plating processes but carbon electrodes deteriorate over a period of time and discolour swabs (discolouration does not affect the plating quality)    

Mixer set for measuring Real Gold Betzmann    With this mixer set consisting of 1x measuring cylinder, 2x pipette, 2 x beaker you can mix rose gold, white gold, green gold, etc. in the right proportion exactly.

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Platinum electrode from Betzmann-Galvanik:   We know that when plating with gold or silver, you want to achieve only the best results and this is achieved by using our platinum electrode (platinized titanium). This will more than meet your requirements. It hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, we recommend the use of this electrode.   Care should be taken to clean the electrode carefully after each use!     Properties "Platinum Electrode 6 mm Platinum electrode (platinized titanium with a platinum layer of 2.5 µm platinum) Ø 6 mm x 100 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials, etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 2.5 μm.   In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable.   This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode.   Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates.   Recommended operating data:   Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C    

BMG-50A-500 Betzmann Galvanik - professional electroplating/ complete system pad electroplating with 500 ml gold and many accessories.   The deluxe plater among the plants! - Faster, handier, easier and more professional!   With this 50 Amp professional electroplating system you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chromed surfaces or chromed plastic (conductive layer) with all metals available on the market e.g: 24 carat real gold (999), 9-24 carat tones - white gold - rose gold - silver - platinum - palladium - nickel - copper acid / alkaline - Chrome - Black Chrome - Rhodium - Black Rhodium - Black Ruthenium - Zinc - Tin - Bronze  Due to the unique and patented design the ideal companion in mobile plating. Complete workstation in one hand, no changing, no adjusting, the Device takes over almost everything automatically!     Scope of delivery:  1x Power Box 50 Amp and high frequency pulse method with 5x extendable spiral cables, 4x handles with holding bracket   1x gallery for handles and cup holder numbered on the front of the device  1x stainless steel container on wheels with storage basket and seat  1x stainless steel perforated plate with collecting tray  5x anode rods ( 4x stainless steel electrode 6mm, 1x stainless steel electrode 4mm)  4x storage cups for liquids fitting into the holder on the unit 10x anode pads mixed (thin, thick multilayer and puffy pads) - 1000 ml electrocleaner - 1000 ml chrome remover - 1000 ml activator - 500 ml nickel - 500 ml copper alkaline - 500 ml Gold 8 G./L. for approx. 5 sqm area  - Training video, manual and guides German by PDF /Email - manual in English or German per PDF /Email - personal free support, no chargeable hotline -1 spray bottle   Device dimensions: Rollable frame with seat: 65 cm x 50 cm Coating system: 35 cm x 38 cm Weight with frame approx. 20 KG System approx. 5 KG removable from the frame Voltage output: 3-12 volts adjustable level 4 Max. 50 amps at peak Industry standard, 24 hours operation possible 1 year warranty   The high frequency pulse method   The excellent standard in mobile coating technology is not only maintained by Betzmann Galvanic Systems, but further extended. With the high-frequency pulse process, HFP for short, in our BMG-50A-500 professional coating system, gold and other metals are applied to a surface faster and are also more durable.   Advantage of HFP: According to studies, the quality of gold coatings applied by HFP is much better than with other coating techniques. The current pulses have a particularly high density with short application times. As a result, the gold coating is applied very evenly in only a short time.   In addition, the HFP coating causes a decrease in porosity, which in turn increases the surface area while maintaining the same amount of gold. The cost factor is thus reduced. The coating particles are much finer and more compact and no less porous than with conventional coatings. This also means that there is no double-layer effect.