Mixer set for measuring

Storage cup for the professional coating machine 50 Ampere Betzmann Galvanoshop:    This stable cup with screw cap fits perfectly into the holder of the professional electroplating unit. Capacity 300 ml. On request, you will receive the appropriate labelling for the material to be stored.   

Betzmann Galvanotechnik: Spare cup / storage cup with lid:   Contents: 125 ml - scaled up to 100 ml This cup with screw cap can be closed cleanly. Due to the scaling This is also the ideal way to measure the mixer combinations like rose gold! Lid colour varies! green - red - yellow - blue - white

  Product information "Klargold - Clear Gold " by Betzmann Galvanik Clear gold with 10 grams of gold per liter is just like the gold flash - wonderfully suitable as an intermediate layer or decorative layer.    Betzmann Galvanik's Clear Gold has the following main applications:   1. for mixing with Rose Gold Mixer - White Gold Mixer - Green Gold Mixer or Goldweisser. The hardness additives are in the respective mixer liquids. You can find the instructions in the respective item description and guide.   2. Optical-decorative layer: Gold is soft and requires the addition of cobalt as a hard abrasion resistant top layer, which is not included in this product. Therefore, the gold layer from the Clear Gold appears slightly lighter yellow. Parts that are not subject to stress, such as souvenirs, horseshoes for decoration, etc., can be easily, directly and inexpensively gilded with the Clear Gold.   Tip: You can first very intensively and thickly gild parts with the clear gold, because the high proportion of gold very quickly and thick gold layers and then coated briefly with the 8 or 12 grams cobalt-displaced hard gold!   3. bonding primer for the following coatings: Many applications require thin layers of gold before actual plating.  With the Clear Gold from Betzmann Galvanik you can apply the desired gold layer. As an example, direct silver plating of nickel is usually not feasible, so you can first gold plate with the Clear Gold, then silver plate. Likewise, when using black chrome, rose gold plating, green gold plating, the clear gold serves as an optimal bonding base when copper or nickel cannot be applied directly! Also, the gilding of nickel, which naturally oxidizes, is very easy and spotless possible. Then chrome plating on clear gold can be done even easier and without problems.   Recommended electrode: platinum electrode, graphite electrode Voltage: from approx. 4 volts  Cyanide free   Procedure: Polishing if necessary Degreasing Activate Clear Gold Continue with the top coat chrome, white gold, rose gold, green gold   Features Used for Designed mainly as a base solution for mixing with our Coloured Gold Mixers Mixing with Yellow, White, Rose, and Green Gold Mixers and Brass Effect Gold Mixer. Can be mixed with 2 or more Gold Mixers Creating a huge spectrum of different shades and tints of gold – good for exactly matching colour of original gold plated layer Can be plated on its own, forming a soft, 24 carat gold layer, completely cyanide free Mainly functional purposes only. Needs a Gold Flash undercoat if plating on to stainless steel     Signalword: Warning   H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INFECTED:P310 Immediately call a POISON CENTER/doctor/  

Rosegold Mixer - Betzmann Galvanoshop: Simply add Rose Gold Mixer to K-Gold to plate fabulously warm, lustrous tones of rose gold.All you need to do is mix the two together to create just the right amount of solution you need. We recommend you buy the mixing kit to make sure you measure out the correct ratios.A 1:10 mix will give you a darker shade of rose gold commonly used for eastern European jewellery,while a mix of 2:10 gives a mix not too dissimilar to highly polished pure copper, however this one does not tarnish. If plating on to stainless steel, nickel or its alloys, first plate a layer of 24 carat gold or Goldflash to give a good, solid base on which to plate your Rose Gold layer.   Features Used for Rose gold plate is very hard compared to pure gold. Great for plating items subject to a high-wear environment (jewellery). Plates fast. Reduces plating time. When mixed with K-Gold, creates the classic warm tones of rose gold. Selective plating of a range of personal items for example jewellery and watch cases and straps. Can be used on larger items such as silverware and picture frames. Redder deposits can be obtained by increasing the volume of mixer. Greater flexibility in colour matching. Consistency of alloy throughout process sequence. Very useful especially when plating large work or plating to higher thickness: the shade of gold plated doesn’t change.   Instructions for use Carbon Electrode3 – 3.5 volts20 – 25 centigrade Ratio of Rosegold Mixer to K-Gold Shade Produced   Remarks 1:10 Yellow-red shade   18 carat alloy (75% gold, 25% copper). Plates fast (up to 1.5 microns per minute). Bright, hard gloss finish. 1.5:10 (see note below) Becomes redder   15 carat gold alloy (62.5% gold, 37.5% copper) Plates bright and fast. 2:10 (see note below) Red gold   12 carat alloy – (50% gold, 50% copper). If wanting to plate over 0.25 microns, plate until it goes dull, polish with MPU and then plate again. 4:10 (see note below) Red gold   Below 10 carat alloy. Tarnishes readilly and not recommended for decorative purposes. Notes: Rose gold mixes above 1:10 are a lot more susceptible to tarnish than mixes of 1:10 and lower Remove any existing layers of rose gold before plating    Labeling gem. CLP-VO:   Signal word: Caution  H315 Causes skin irritation H319 Causes severe eye irritation. H335 May cause respiratory irritation. P261 Avoid breathing dust/fume/gas/mist/vapor/aerosol. P280: Wear protective gloves/protective clothing/eye protection/face protection. P305 IF IN EYES:P351 Rinse cautiously with water for several minutes. P338 Remove any contact lenses if possible. Continue to rinse.        

Gold whitener from Betzmann Galvanik - This new mixer liquid can be used in conjunction with our normal gold electrolyte to create different lighter gold tones, such as 18 carat gold. You simply mix in a ratio of 2:10 ml (2 ml gold whitener and 10 ml gold electrolyte) to create an 18 carat gold tone. The more gold whitener you add, the brighter the gold will be. Can also be applied pure! Gold brightener:  When mixed with our Gold Electrolyte, it creates many different shades of gold, from a hue similar to 18 karat yellow gold, to pale yellow, to a grayish hue common to white gold alloys. Features / Advantages The Gold Weisser can be mixed with our standard gold plating solution in a ratio of 2 to 10. Bleaches back the hue of our standard gold solution to create a finish similar to most common 18-karat gold tones No need to buy another base solution - just mix it with our standard gold. You can add more Gold Weisser to lighten the shade further, or add less to create a richer shade. Great flexibility - you can meet your customers' exact requirements Operating conditions and deposition data Voltage range 3.0 - 5.0 volts Temperature 18 - 25 °C Gold concentration 8 - 4 g/l Electrode Platinum or graphite electrode Gold content in the plate 99.9% (yellow gold) - 75% (gray-white) Deposition rate at (3.5 volts, platinum electrode) approx. 0.5 microns per minute (spot) Hardness of: 220 (yellow gold) - 550 Hv (white gold) Density of deposit 15.0 (yellow gold) - 19.0 g/cm3 (white gold) Voltage Medium voltage - high voltage Special storage conditions NoneShelf life Over 3 years Notes: none We strongly advise against the use of stainless steel anodes for most of our plating processes except for degreasing - activating and dechroming! Coating rates are calculated over a sample area that is permanently covered with a swab.

Large storage cup - Betzmann Galvanik - Real Gold    This stable cup with screw cap made of transparent PP holds approx. 375 ml.   Practical is the storage of the electrode with the cloth pad in the respective electrolyte. On request, you will receive the appropriate labelling for the material to be stored.  Colour varies, black or white lid!    Dimensions approx. 8 cm high, diameter 7.3 cm 

Ratio of Brass Effect Gold Mixer to K-GoldShade ProducedRemarks1:10Resembles freshly polished 70/30 brass14 carat alloy. May require polishing1.5:10 (see note below)Becomes lighter When plating on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using Gold Solution or GoldflashOther informationPlating rate2.6 microns per minute (1:10 ratio, 3 volts, Carbon Electrode)Temperature20 – 25 °CElectrodeCarbonSpecial storage requirementsNoneShelf lifeUp to six monthsHealth and Safety classificationIrritantSpecial considerationsNoneTransport (UN number)None: Not classified as dangerous for transport Notes:The shade can be varied by altering the mix ratio. Increase the ratio for lighter shades; decrease for darker shades. Signal word Warning  Hazard statement(s). H316 Causes mild skin irritation. H320 Causes eye irritation. H335 May cause respiratory irritation. Precautionary statement(s) P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/spray.  P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.  Supplemental Hazard none

White Bronze Mixer  Just like the other ‘mixer solutions’ we sell, Bronze Mixer can be added to our new copper solution to create a beautiful shade of freshly cast bronze. This brand new solution, exclusive to Real Gold, has been introduced as a replacement for nickel plating solution. Nickel is now banned by the EU for use in the cosmetic industry, as it causes nickel allergy in some people. White Bronze is the ideal substitute for nickel plate, where the surface of the metal is likely to come into contact with the skin, such as on costume jewellery or on spectacle frames. The main uses are listed below. A replacement for nickel to stop nickel allergy. Replaces nickel for use as a barrier layer when electroplating gold onto copper or brass. Makes an excellent key layer when plating silver onto pewter, Britannia metal or other high-tin alloys. Is similar in hardness to nickel with the electrical properties of silver but with superior corrosion resistance. White bronze makes an excellent undercoat forblack chrome. As with our other mixer solutions, you have the same flexibility to create the exact shade of bronze you require. At a low mix ratio it plates an attractive gold shade (2N) of bronze, a white, tarnish resistant coating which resembles nickel. The highest ratio is more like bright chrome.     Features Used for When mixed with our Copper Plating Solution to create white bronze, can be used as a replacement for nickel to comply with EU legislation and avoid nickel allergy Plating any items that will be handled or otherwise come into regular contact with the skin, for example jewellery, lighters and musical instruments Non-tarnish and silver-like in appearance Can be used as a low-cost, tarnish resistant alternative to silver plate for example when repairing musical instruments or up-cycling silver plated antiques Effective as a barrier layer Can be used for plating on non-conductive surfaces; makes an excellent barrier layer between copper/brass and gold – ideal for plating on non-conductive surfaces Base coat Plating an excellent undercoat for black chrome and when plating silver onto pewter, Britannia metal or other high-tin alloys.   Mixing ratio; 1 part Copper Plating Solution to 2 parts White Bronze Mixer – leave to stand for 15 minutes before using     Kennzeichnung gem. CLP-VO Symbolwort: Achtung H315 Verursacht Hautreizungen. H319 Verursacht schwere Augenreizung. H335 Kann die Atemwege reizen P261 Einatmen von Staub/Rauch/Gas/Nebel/Dampf/ Aerosol vermeiden. P305 + P351 + P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.   

Green Gold Mixer: You can use this mixer to create a range of coloured gold plating solutions that are popular in jewellery making. When plating on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using Gold Flash! Operating Conditions and other data   Voltage Range   Temperature 20 – 25 °C Electrode Carbon Gold content in plate Please refer to Coloured Gold Mixing Calculator Stress Medium Special storage requirements None Shelf life 1 – 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) None: Not classified as dangerous for transport