S Stainless Steel & Nickel Activator – Professional Deplating / Pickling Solution for Optimal Electroplating AdhesionSurface Activation for Stainless Steel, Nickel and Passive Metal SurfacesThe Stainless Steel & Nickel Activator from Betzmann Galvanik is a professional pickling and activation solution designed to prepare stainless steel, nickel and passive metal surfaces before electroplating.High-alloy metals such as stainless steel and nickel naturally form a very stable oxide and passive layer on their surface. Although this layer provides excellent corrosion resistance, it can significantly reduce the adhesion of subsequent electroplated coatings and may cause problems such as poor adhesion, peeling or uneven deposits.The activator removes these interfering passive layers and creates a chemically active metal surface that is optimally prepared for subsequent electroplating processes.Suitable for applications such as:Nickel platingGold platingSilver platingChrome platingOther electroplating processesYour Advantages at a Glance✔ Removes oxide and passive layers✔ Activates stainless steel and nickel for improved adhesion✔ Prevents adhesion problems during electroplating✔ Suitable for non-electrolytic and electrolytic applications✔ Ideal for pen plating, tampon plating and tank plating✔ Fast and easy application✔ Improves the quality and durability of electroplated coatings✔ Professional surface preparation for high-quality resultsWhy Is an Activator Necessary?Metals such as stainless steel and nickel can quickly form a passive layer when exposed to air.This layer is an excellent protection against corrosion, but it can prevent a strong bond between the base material and the following electroplated coating.Without proper activation, problems may occur:Poor coating adhesionPeeling or flaking of the depositSpottingUneven coatingsPremature coating failureThe activator creates a freshly activated surface and provides the ideal foundation for the next electroplating step.Application Without Electricity (Immersion Process)The activation can easily be carried out without a power supply.Procedure:Thoroughly degrease the workpiece.Immerse the workpiece in the activator.Activate for approx. 30–60 seconds.Rinse thoroughly with water.Continue directly with electroplating.For improved performance, the activator can be heated.Recommended temperature:Usable at room temperatureHeating to approx. 40 °C improves the activation performanceThe increased temperature accelerates the removal of oxide and passive layers and provides a more effective surface activation.Application With Electricity (Electrolytic Activation)For especially reliable results, the activator can also be used electrolytically.This method is particularly suitable for:Stainless steelPassive nickel surfacesDifficult-to-activate materialsProcedure:Thoroughly degrease the workpiece.Connect the workpiece to the negative pole.Connect a stainless steel or suitable electrode to the positive pole.Treat the surface with the activator.Rinse thoroughly and proceed immediately with electroplating.Recommended values:Voltage: approx. 4 voltsElectrode: stainless steel or graphiteActivation time: approx. 30–60 secondsElectrolytic activation supports the removal of passive layers and creates a highly active surface for excellent coating adhesion.Suitable MaterialsThe activator is especially suitable for:Stainless steelNickelPassive nickel surfacesSteelCopperBrassVarious metal alloysFor unknown materials, we recommend testing on an inconspicuous area before use.Processing After ActivationAfter activation, the workpiece should be electroplated as soon as possible.Recommended process:Activate → Rinse → Electroplate immediatelyActivated metal surfaces can change again when exposed to air, so quick further processing ensures the best results.Typical ApplicationsIdeal for:Jewellery electroplatingStainless steel coatingRepair platingIndustrial applicationsPrecision engineeringRestoration workMechanical engineeringMetal finishingGold plating stainless steelNickel plating difficult materialsTechnical InformationProduct type:Activator / Pickling solutionApplication:Surface preparation before electroplatingProcesses:Non-electrolytic activation (immersion process)Electrolytic activation (pen/tampon process)Activation time:Approx. 30–60 secondsTemperature:Room temperature possibleHeating up to approx. 40 °C improves performanceVoltage for electrolytic application:Approx. 4 voltsSuitable electrodes:Stainless steelGraphiteSafety InformationWear safety glasses and suitable protective gloves.Avoid contact with skin and eyes.Use only in well-ventilated areas.Observe the safety data sheet.Do not inhale vapours or aerosols.Quality from Betzmann GalvanikThe Stainless Steel & Nickel Activator is an essential step for professional electroplating applications.By reliably removing oxide and passive layers, it creates an optimally prepared surface for strongly adherent, uniform and durable metal coatings.SEO Shopware 6Product Title:Stainless Steel & Nickel Activator – Pickling Solution for Electroplating PreparationSEO URL:stainless-steel-nickel-activator-pickling-solutionSEO Title:Stainless Steel Nickel Activator | Pickling Solution for ElectroplatingMeta Description:Professional stainless steel and nickel activator for electroplating preparation. Removes oxide and passive layers for excellent adhesion during gold plating, nickel plating, silver plating and chrome plating.Keywords:stainless steel activator, nickel activator, pickling solution electroplating, stainless steel electroplating preparation, activate stainless steel, activate nickel, remove passive layer, remove oxide layer, electroplating preparation, pen plating activator, tampon plating activator, gold plating stainless steelLong-Tail Keywords:stainless steel activator before gold plating, nickel pickling solution for electroplating, improve stainless steel plating adhesion, remove stainless steel passive layer, electrolytic stainless steel activation, immersion activator for electroplating

Galvanic Cleaner Electrocleaner – Professional Metal Cleaning Before ElectroplatingPerfect Surface Preparation for Strong Adhesion and High-Quality Electroplated CoatingsThe Galvanic Cleaner Electrocleaner from Betzmann Galvanik is a powerful professional degreasing solution for cleaning and preparing metal surfaces before electroplating.Thorough degreasing is one of the most important steps in electroplating technology. Even the smallest residues such as oils, grease, polishing compounds, waxes, silicones, fingerprints or other organic contaminants can negatively affect the adhesion and quality of electroplated coatings.The Electrocleaner reliably removes interfering contaminants and creates a clean, activated and optimally wettable metal surface. This provides the ideal foundation for uniform, strongly adherent and high-quality electroplated coatings.Suitable for numerous electroplating processes such as:Gold platingSilver platingNickel platingCopper platingZinc platingChrome platingRhodium platingOther electroplating applicationsA professional coating always starts with perfect surface preparation.Your Advantages at a GlanceProfessional galvanic degreaser for metal surfacesRemoves oil, grease, polishing residues and organic contaminantsIdeal preparation before electroplating processesImproves adhesion of subsequent metal coatingsSuitable for both non-electrolytic and electrolytic cleaningSuitable for tank plating, pen plating and tampon platingSupports bright and uniform coating resultsEasy applicationSuitable for hobby users, workshops and professional applicationsWhy Degreasing Before Electroplating Is EssentialThe quality of every electroplated coating depends greatly on proper surface preparation.Even very small amounts of contamination can cause problems such as:Poor coating adhesionPeeling or flaking of the depositSpotting and stainsUneven coating surfacesPoor wetting during electroplatingThe Galvanic Cleaner Electrocleaner ensures an optimally prepared metal surface and improves the reliability and quality of the following plating process.Suitable MaterialsThe Electrocleaner is suitable for many conductive metals and metal alloys, including:SteelStainless steelCopperBrassBronzeNickelSilverOther electroplatable metalsFor sensitive materials, we recommend testing on an inconspicuous area before use.Application Methods1. Non-Electrolytic CleaningThe cleaner can be used without electrical assistance.Application:Immerse the workpiece in the Electrocleaner.Allow it to work for several minutes depending on the contamination level.Move the workpiece slightly if required.Rinse thoroughly with water.Continue directly with the next electroplating preparation step or coating process.2. Electrolytic Cleaning with Stainless Steel ElectrodeFor particularly thorough cleaning results, the Electrocleaner can also be used electrolytically.This method effectively removes stubborn organic residues such as oil, grease and polishing compounds.Recommended application:Electrode: Stainless steel electrodeVoltage: approx. 4 voltsProcess: Electrolytic degreasingCleaning time: Depending on contamination and workpiece sizeThe stainless steel electrode offers excellent durability and long service life and is ideally suited as a counter electrode for electrolytic cleaning.After cleaning:Rinse the workpiece thoroughlyDo not touch the cleaned surface with bare handsContinue immediately with the next electroplating stepUse in Electroplating ProcessesRecommended process sequence:Cleaning → Rinsing → Activation → ElectroplatingA clean and grease-free surface is essential for:Excellent adhesionUniform layer formationBrilliant surfacesReproducible resultsThe Electrocleaner is therefore an important part of every professional electroplating setup.Typical ApplicationsIdeal for:Jewellery electroplatingGold platingSilver platingRepair platingElectronicsPrinted circuit boardsPrecision engineeringMetal finishingRestoration workWorkshopsIndustrial coating applicationsPractical Tips for Best Results✔ Remove heavy contamination before cleaning✔ Use clean tools and containers✔ Do not touch cleaned surfaces with bare hands✔ Rinse thoroughly after degreasing✔ Continue with the next plating step immediately to prevent renewed contaminationAvoid Common ProblemsPoor coating adhesion:→ Surface was not sufficiently cleaned or degreased.Spots or uneven coatings:→ Oil, grease or polishing residues remain on the surface.Coating peeling after plating:→ Surface preparation was insufficient.Technical InformationProduct:Galvanic Cleaner / ElectrocleanerApplication:Metal cleaning before electroplatingProcesses:Non-electrolytic cleaningElectrolytic cleaningRecommended counter electrode for electrolytic cleaning:Stainless steel electrodeRecommended voltage:Approx. 4 voltsSuitable for:Tank platingPen platingTampon platingSafety InformationWear safety glasses and suitable protective gloves.Avoid contact with skin and eyes.Use only in well-ventilated areas.Observe the safety data sheet.Do not release into the environment.Quality from Betzmann GalvanikThe Galvanic Cleaner Electrocleaner is a professional surface preparation product for users who require reliable and high-quality electroplating results.A perfect coating always begins with a perfectly cleaned surface. With the Electrocleaner, you create the ideal foundation for bright, uniform and permanently adherent metal coatings.

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Stainless Steel Electrode Ø 6 mm – Universal Electrode for Activating, Degreasing, Dechroming and Chromium PlatingDurable Stainless Steel Electrode for Professional Tank, Pen and Brush PlatingThe Stainless Steel Electrode Ø 6 mm is manufactured from high-quality, corrosion-resistant stainless steel and has been specially designed for a wide range of electroplating applications. It is ideal for electrolytic degreasing, surface activation, dechroming and chromium plating, providing reliable current transfer in tank plating, pen plating and brush (tampon) plating.Its excellent chemical resistance and mechanical strength ensure a long service life, making it the perfect choice for workshops, laboratories and industrial applications.Your AdvantagesManufactured from high-quality corrosion-resistant stainless steelRobust and durable constructionExcellent electrical conductivityIdeal for electrolytic degreasing and surface activationPerfect for dechromingIdeal for chromium platingSuitable for tank plating, pen plating and brush platingFits standard 6 mm electrode holdersEasy to useProfessional quality from Betzmann GalvanikWhy Use a Stainless Steel Electrode?Stainless steel electrodes are primarily used for pretreatment and cleaning processes. They offer excellent resistance to many electrolytes while providing reliable electrical conductivity with minimal wear.They are particularly suitable for:Electrolytic degreasingSurface activationDechromingChromium platingCleaning processes before electroplatingTypical ApplicationsIdeal for:Electrolytic degreasingSurface activationDechromingChromium platingPretreatment of metal componentsTank platingPen platingBrush (tampon) platingWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from high-quality stainless steel and offers:Excellent corrosion resistanceGood electrical conductivityHigh mechanical strengthLong service lifeVersatile applicationsApplication InstructionsBefore use:Thoroughly clean the workpieceRemove grease and contaminationUse a suitable electrolyteFollow the recommended voltage and current settingsImportant Note:For precious metal plating such as gold, silver, palladium or platinum, we recommend using a graphite or platinum electrode, as these do not contaminate the electrolyte with metal ions. Stainless steel electrodes are primarily intended for activation, cleaning, dechroming and chromium plating applications.Technical SpecificationsMaterial: Corrosion-resistant stainless steelDiameter: 6 mmLength: approx. 95 mmExcellent chemical resistanceSuitable for standard electrode holdersPackage Contents1 × Stainless Steel Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Stainless Steel Electrode Ø 6 mm offers outstanding durability, excellent chemical resistance and versatile performance, making it the ideal choice for degreasing, activation, dechroming and chromium plating in hobby, workshop and industrial environments.