MetaSeal - Metal Care

PRODUCT PRESENTATION - GOLD ELECTROLYTE 999 FINE GOLD - 23,8 CARAT  WITH 2 GRAMS OF GOLD PER LITER   Do-it-yourself gold plating has never been so easy. Our Gold Electrolyte from Betzmann Galvanik can be purchased by anyone. So whether it is for use in the highly professional use of laboratories, industry, luxury companies, to the use in the hobby, main or in the side business, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,   The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition.  The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe.  Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes. The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating!  The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..   Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more. Graphite electrodes can also be used.  Gold content: 2 grams per liter    The procedure for gold plating: It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts   Operating Conditions and Deposit Data Plating Factor 0.01 A/cm2 Plating rate 0.12 micron per minute at 0.01A/cm2 Temperature 18 – 25 °C pH 4.4 – 5.0 Gold concentration 2 grams per litre Agitation very low (Stirring Bar Mini) Electrode Mesh Gold content in plate 99.9% (balance carbon) Cathode efficiency ~25% at Plating Factor = 0.01A/cm2 Hardness 190 – 210 Hv Density of deposit 19.3 g/cm3 Stress Medium Special storage requirements Away from sunlight Shelf life 1 – 2 years Health and Safety classification Harmful             Signalword: Warning  H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. EUH032 Contact with acids liberates very toxic gas. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.  

MPU is an excellent preparation compound for brush and tank electroplating as it cleans, polishes and activates all in one stage. It quickly creates a water break free surface on a wide range of metals.   Features Used One stage cleaning and activating product For cleaning and activating in one stage, can replace the ActiClean stage – saves time and money Can be used during the plating process without having to re-electroclean and activate Clearing burns or other marks produced during plating – all you have to do is rinse and carry on plating

Rust Remover from Betzmann Galvanik! RUST REMOVER: Combined chemical agents and selected polishing clays result in a unique formulation for reviving heavily corroded metal objects. After removal, the natural protection of the metal is restored, corrosion inhibitors prevent attack on uncorroded parts.   Ingredients: AQUA, ALUMINA, HYDROCHLORIC ACID, fatty alcohol polyglycol ether, fatty acids, 2-propyn-1-ol, compound with methyloxirane, XANTHAN GUM, COCAMIDOPROPYL BETAINE , prop-2-in-1-ol. Information on ingredients according to the Detergents Directive - Annex VII D, EC -648/2004 is available on the EU portal "European List of Cosmetic Ingredients".        GHS05 GHS07  Danger. Causes severe skin burns and eye damage. May cause respiratory irritation. If medical advice is needed, have packaging or label at hand. Keep out of the reach of children. Wear protective gloves / protective clothing / eye protection / face protection. Do not breathe vapor. IF ON SKIN (or hair): Remove all contaminated, soaked clothing immediately. Wash skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove existing contact lenses if possible. Continue to rinse. Contains: Fatty alcohol polyglycol ether, hydrochloric acid.  

PRODUCT PRESENTATION - HIGH SPEED GOLD ELEKTRTOLYT 999 FINE GOLD - 23,8 CARAT  WITH 12 GRAMS OF GOLD PER LITER   More gold in the electrolyte means even faster plating, thicker layers with the same working time or more surface area. Also the purchase of the high speed gold is cheaper, because you buy more gold per liter at a lower price. Do-it-yourself gold plating has never been easier. Our gold electrolyte from Betzmann Galvanik can be purchased by anyone. So whether it is for use in the highly professional use of laboratories, industry, luxury companies, to the use in the hobby, main or in the side business, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,   The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition.  The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe.  Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes. The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating!  The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..     Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more. Graphite electrodes can also be used.  Gold content: 12 grams per liter    The procedure for gold plating: It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts    Operating Conditions and Deposit Data Voltage Range 3.0 – 8 volts Temperature 14 – 25 °C Gold Concentration 12g/l Electrode Platinum or Carbon (see notes) Gold content in plate 99.9% (balance carbon) Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.7 micron per minute (spot) Hardness 220 – 230 Hv Density of deposit 19.0 g/cm3 Stress Medium stress Special storage requirements Away from sunlight Shelf life 1 – 2 years    Hazard statements according to Art. 25 (6) CLP Regulation:    Signalwordt: Warning    H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. EUH032 Contact with acids liberates very toxic gas. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.