Nickel Remover / Nickel Stripper SW10014 Effective chemical solution for removing electroplated nickel layers Short Description The Nickel Remover / Nickel Stripper SW10014 is a chemical solution designed for the fast, controlled, and efficient removal of electroplated nickel layers from metal surfaces. It is ideal for workshops, electroplating labs, hobby projects, or professional applications where existing nickel coatings need to be removed before re-plating or surface refinishing. Applications The nickel stripper is used to: Safely and uniformly remove electroplated nickel layers Prepare metal surfaces for re-plating Remove damaged, uneven, or aged nickel layers Restore metal parts prior to polishing or coating Use in workshops, small-scale production, and professional electroplating processes How Nickel Removal Works (Simple Explanation) Mechanical removal of nickel is difficult or may damage the base metal. The nickel remover uses a chemical reaction that selectively dissolves the nickel layer without significantly affecting the underlying metal (e.g., copper, brass, steel) when applied correctly: Preparation: Degrease and clean the workpiece. Immersion: Fully submerge the nickel-plated part in the solution. Dissolution: Chemical interaction dissolves the nickel layer. Completion: After removal, rinse parts thoroughly with water. Benefits of Nickel Remover SW10014 Efficient removal of electroplated nickel layers Selective toward nickel, gentle on most base metals Prepares surfaces for subsequent electroplating or finishing Easy bath application – no mechanical stripping required Suitable for hobby, workshop, and professional use Technical Parameters PropertyValue / RangeProduct typeNickel Remover / Chemical Nickel StripperApplicationChemical removal of nickel layersOperating temperatureRoom temperature to slightly warmedBath typeNon-electrolytic chemical processSuitable layersElectroplated nickelBase metalsCopper, brass, steel, stainless steel (after pretreatment)Reaction timeDepends on layer thickness and conditionLayer thicknessAll standard electroplated nickel layersSafety precautionsProtective equipment requiredStorageCool, dry, tightly closed container Note: Values are for general guidance and may vary depending on layer and application. Practical Application Tips Preparation: Degrease and clean the workpiece before immersion for best results. Nickel Removal in Dip Bath: Fully submerge the workpiece in the solution. Monitor reaction time – nickel dissolves depending on thickness and temperature. Remove the workpiece once the nickel layer is dissolved. Post-treatment: Rinse thoroughly with clean water to remove all residues. Degrease and activate before applying new coatings if required. Safety Information The nickel remover is a strong chemical solution that must be handled carefully: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work in well-ventilated areas only Do not ingest – seek medical attention if swallowed Keep out of reach of children Dispose of waste according to local chemical disposal regulations Conclusion The Nickel Remover / Nickel Stripper SW10014 is a reliable chemical solution for efficiently and controlled removal of electroplated nickel layers. It is ideal for workshops, hobbyists, and professional electroplating facilities that need to prepare surfaces for re-plating or further processing without mechanical effort or damage to the base material. The chemical dip bath application ensures uniform, gentle nickel removal and simplifies subsequent processes.

Stainless Steel Electrode Ø 6 mm (BMG-007) Short Description The Stainless Steel Electrode Ø 6 mm is a versatile plating electrode designed for a wide range of electroplating tasks, especially degassing, activation, dechroming and chrome plating. Suitable for pen, bath and pad electroplating, it delivers consistent current flow and durable performance in your plating setups.  Product Description This electrode is made from corrosion-resistant stainless steel with a diameter of 6 mm and a length of approx. 9.5 cm, making it a compact and easy-to-handle tool for many galvanic applications. It is particularly effective for: Degreasing and activating metal surfaces prior to plating Dechroming or preparing surfaces for subsequent layers Chrome plating processes where robust anode performance is needed Pre-treatment and cleaning steps during electrochemical work  It fits standard holders and electrode grips used in pen and tampon plating and provides reliable performance in repeated or continuous use.  Key Benefits Durable stainless steel construction: Offers good chemical resistance and long service life.  Broad compatibility: Well-suited for degreasing, activation and dechroming operations.  Effective for chrome plating: Works particularly well in chromic electroplating applications. Standard size: Ø 6 mm fits most electrode handles and plating tools.  Easy to use: Ergonomic size and reliable conductivity promote smooth workflows.  Usage Tips Clean and degrease surfaces before using the electrode for best results. In plating processes such as gold or silver, consider using a graphite or platinum electrode instead, as stainless steel may contaminate some plating baths.  For chrome plating, stainless steel may be used effectively, sometimes in combination with aluminium electrodes.  Conclusion The Stainless Steel Electrode Ø 6 mm is a reliable, robust and versatile tool for a variety of electroplating and surface preparation tasks – especially degreasing, activation and chrome plating. Its solid construction and compatibility with standard plating systems make it a valuable addition to any workshop or lab.

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Galvano Activator BMG-061.2 Surface activator and pickling solution for electroplating applications Short Description The Galvano Activator BMG-061.2 is a specially formulated chemical solution used for activating metal surfaces prior to electroplating. It removes thin oxide and passive layers that prevent proper adhesion of electroplated coatings and restores a chemically active metal surface. The activator is an essential preparation step for achieving uniform, adherent and high-quality electroplated layers, such as nickel, gold, silver or chromium coatings. What is the activator used for? The activator is used to: remove thin oxide and passive layers from metal surfaces activate metals after degreasing and before electroplating improve adhesion and durability of subsequent coatings prepare workpieces for professional electroplating processes It is commonly applied to: steel and passive nickel surfaces copper, brass and copper alloys preparation before nickel plating, silver plating, gold plating or chromium plating How does the activator work? (simple explanation) Even after thorough cleaning and degreasing, metal surfaces often remain covered by microscopic oxide layers that are invisible to the eye but block electroplating. The activator works by: Dissolving and removing thin oxide and passive layers Chemically activating the metal surface Allowing the next electroplated layer to adhere evenly and securely This results in better coating quality, improved adhesion and longer service life of the plated surface. Application Instructions (practical guidance) Preparation Before using the activator, the workpiece should be polished if required and thoroughly degreased, e.g. with a suitable electrocleaner. Application Method 1 – Without electrical current (immersion) Immerse the workpiece in the activator for 30–60 seconds Rinse briefly with clean water Proceed with electroplating within 10–30 minutes to prevent re-oxidation Application Method 2 – With electrical assistance (brush / pen activation) Use a stainless steel or graphite electrode Apply approx. 2.7 V DC Treat the surface with gentle circular movements for about 30 seconds Tip: Begin electroplating as soon as possible after activation, as metal surfaces oxidize quickly when exposed to air. Advantages of Galvano Activator BMG-061.2 Effectively removes invisible oxide and passive layers Ensures optimal surface activation before electroplating Improves adhesion and uniformity of plated coatings Suitable for various metals and alloys Can be used with or without electrical current Proven product for hobby, workshop and professional use Safety Information The activator is a chemical solution and must be handled with appropriate care: Wear chemical-resistant gloves, safety goggles and protective clothing Avoid contact with skin and eyes In case of contact, rinse immediately with plenty of water Use only in well-ventilated areas Keep out of reach of children Warning: May cause serious eye irritation. Proper protective equipment is mandatory. Scope of Delivery Galvano Activator BMG-061.2 Quantity according to selection Conclusion The Galvano Activator BMG-061.2 is an essential preparation product for professional electroplating. By removing oxide layers and activating metal surfaces, it ensures reliable adhesion, uniform coatings and consistently high-quality electroplated results — for both beginners and professionals.