Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Thick Multi-Layer Anode Pad – Maximum Durability for Demanding Electroplating The thick multi-layer anode pad is a highly durable and robust tampon (anode sleeve) designed for professional use in pen plating and brush (tampon) plating applications. Its reinforced multi-layer construction provides significantly longer service life compared to standard pads while ensuring consistent and uniform electrolyte transfer during the plating process. This makes it the ideal solution for demanding applications, rough surfaces, and intensive use conditions. Key Benefits Multi-layer construction for maximum durability Ideal for rough, uneven, or structured surfaces Significantly reduced wear compared to soft pads Uniform electrolyte distribution for consistent coatings Compatible with a wide range of plating solutions Cost-efficient due to extended lifespan Applications Pen plating (localized electroplating) Brush / tampon plating Repair and touch-up work Technical and functional coatings Processing of rough or heavily used surfaces This anode pad is the preferred choice when standard pads wear out quickly or fail to provide consistent results. Technical Specifications Design: thick, multi-layer stitched construction Structure: reinforced fabric layers for high stability Absorption: high electrolyte retention capacity Use: universal for electroplating applications Scope of delivery: 1 piece Compatibility Suitable for anode rods up to approx. 6 mm diameter Expandable up to approx. 8 mm if adjusted Dual insertion openings for extended usability Compatible with: Graphite anodes Platinum anodes Standard plating pens Process Advantages Even electrolyte and current distribution Reduced streaking and uneven coatings Better control on difficult surfaces Longer operating time → fewer replacements Increased efficiency in demanding applications Function in the Plating Process The anode pad acts as an electrolyte carrier and contact medium between the anode and the workpiece. It directly affects: Coating uniformity Surface quality Process stability A high-quality multi-layer pad ensures consistent, professional results even under heavy use. Application Note Pre-soak thoroughly with electrolyte before use to ensure conductivity Inspect regularly and replace when worn Conclusion – The Professional Choice for Heavy-Duty Applications The thick multi-layer anode pad is the ideal solution for professionals working under demanding electroplating conditions. It delivers: Maximum durability Reliable coating quality Improved process efficiency A small component with a major impact on plating performance and consistency.

Bright Nickel Electrolyte – Ready-to-Use Nickel Plating Solution for Tank, Pen and Brush PlatingProfessional Bright Nickel Electrolyte for Highly Glossy, Corrosion-Resistant and Wear-Resistant Nickel CoatingsThe Bright Nickel Electrolyte from Betzmann Galvanik is a premium-quality, ready-to-use electroplating solution developed for depositing brilliant, highly reflective nickel coatings. It is suitable for both decorative and technical electroplating applications and can be used in tank plating, pen plating, and brush plating.The deposited nickel coatings provide excellent corrosion protection, high hardness, outstanding adhesion, and a bright silver-like finish with the characteristic warm tone of pure nickel. Bright nickel is widely used both as an attractive decorative finish and as a functional intermediate layer for subsequent precious metal coatings.This professional electrolyte is suitable for hobby users, workshops, jewelry manufacturers, restoration specialists, and industrial electroplating applications.Your AdvantagesReady-to-use bright nickel electrolyteBrilliant high-gloss nickel finishExcellent corrosion protectionOutstanding wear resistanceHigh chemical resistanceIdeal diffusion barrier for precious metal platingSuitable for tank, pen, and brush platingDecorative and technical applicationsEasy to useProfessional quality from Betzmann GalvanikTypical ApplicationsPerfect for:Jewelry manufacturingJewelry repairWatchmakingClassic car restorationMotorcycle partsAutomotive componentsMechanical engineeringModel makingMetal finishingElectrical contactsElectronic componentsDecorative metal partsIndustrial electroplatingRestoration projectsExcellent Corrosion Protection and Decorative FinishNickel is one of the most important electroplating metals worldwide. Even relatively thin nickel coatings significantly improve corrosion resistance while protecting metal surfaces against humidity, water, air, diluted acids, and alkaline solutions.For maximum corrosion protection, the classic plating sequence is recommended:Copper → Bright Nickel → ChromiumThis combination produces an exceptionally durable, highly reflective, and wear-resistant surface.Bright nickel can also be used as a decorative final finish without an additional chromium layer.Ideal Diffusion BarrierBright nickel is frequently used as an effective diffusion barrier between copper and precious metal coatings. It prevents migration of base metals into the final coating and maintains long-term colour stability.It is the ideal intermediate layer before:Gold platingRose gold platingWhite gold platingSilver platingPalladium platingRhodium platingBlack rhodium platingRuthenium platingChromium platingSuitable Base MaterialsSuitable for plating:SteelIronCopperBrassBronzeSilverGoldNickelNickel alloysStainless steel should first be activated using a suitable Nickel Strike to ensure excellent adhesion.Not suitable for direct plating on:AluminiumTitaniumChromiumZincThese materials require appropriate pretreatment or specialised intermediate coatings.ApplicationBefore plating, all workpieces should be thoroughly cleaned, degreased, and, where necessary, derusted.For best results, follow these preparation steps:CleanDegreaseActivateNickel plateRinseApply additional decorative coatings if requiredThe use of a Nickel Anode is highly recommended to maintain a constant nickel concentration and maximise electrolyte service life.The magnetic properties of ferromagnetic workpieces remain unchanged after nickel plating.Technical SpecificationsElectrolyte DataReady-to-use electrolytepH value: approx. 4Operating temperature: 15–60 °CRecommended Operating ConditionsCurrent density: 0.3–3.0 A/dm²Up to 5 A/dm² with solution agitationTank plating:Approx. 2.8 V (5 cm electrode distance)Approx. 4.0 V (10 cm electrode distance)Approx. 6.6 V (20 cm electrode distance)Pen and brush plating:Approx. 6–12 VoltsRecommended: 8–9 VoltsPlating time: 10–60 minutesDeposition rate: Approx. 0.2 µm/min at 2 A/dm² and 20 °CAnode material: Nickel AnodeCoating PropertiesBrilliant high-gloss nickel finishBright silver-like appearanceCharacteristic warm nickel colourExcellent adhesionOutstanding corrosion resistanceHigh chemical resistanceExcellent wear resistanceEffective diffusion barrierMagnetic properties of the base material remain unchangedSupplied AsReady-to-use Bright Nickel ElectrolyteAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops premium electroplating solutions for decorative and technical surface finishing. The Bright Nickel Electrolyte produces brilliant, uniform nickel coatings with outstanding corrosion protection and is ideal both as a decorative final finish and as a diffusion barrier before precious metal plating in tank plating, pen plating, and brush plating applications.

Aluminium Electrode Ø 6 mm – Aluminium Anode for Chromium(III) Plating6 mm Aluminium Electrode for Professional ElectroplatingThe Ø 6 mm Aluminium Electrode from Betzmann Galvanik is a compact and highly conductive anode for suitable electroplating applications. It is particularly suitable for use with Chromium(III) plating electrolytes and compact electroplating systems for pen plating, brush plating, tampon plating and bath plating.With its 6 mm diameter, the electrode is suitable for many standard electrode holders and plating systems. It is therefore ideal for workshops, repair businesses, professional electroplaters, industrial applications and users performing electroplating work themselves.Aluminium Anode for Chromium(III) PlatingAluminium can be used as an anode with suitable Chromium(III) plating electrolytes. The correct anode material always depends on the chemical formulation and technical specifications of the individual plating electrolyte.The Ø 6 mm Aluminium Electrode is therefore particularly suitable for electroplating systems where the Chromium(III) electrolyte is specifically approved for use with aluminium anodes.Important: Not every electroplating electrolyte is suitable for aluminium anodes. Always follow the technical instructions and anode recommendations of the electrolyte manufacturer.Ideal for Pen Plating and Tampon PlatingWith its compact 6 mm diameter, this aluminium electrode is particularly practical for small and mobile electroplating systems.Typical applications include:Pen platingTampon plating / brush platingSmall and medium-sized electroplating bathsElectroplating with suitable Chromium(III) electrolytesLocal chrome plating and repair workSelective surface finishingWorkshop electroplatingLaboratory and development applicationsThe electrode is connected to the positive pole (+) and functions as the anode. The workpiece being plated is connected to the negative pole (−) and functions as the cathode.Advantages of the Ø 6 mm Aluminium Electrode6 mm diameter for many standard electrode holdersGood electrical conductivityCompact designParticularly suitable for compatible Chromium(III) electrolytesIdeal for pen plating and tampon platingSuitable for smaller electroplating bathsEasy to handleSuitable for precise and localized plating applicationsProfessional electroplating accessory from Betzmann GalvanikTechnical SpecificationsPropertySpecificationProductAluminium ElectrodeMaterialAluminiumDiameter6 mmArticle NumberSW10012FunctionAnodeMain ApplicationChromium(III) PlatingProcessesPen Plating, Tampon Plating, Bath PlatingConnectionPositive Pole (+)SupplierBetzmann GalvanikApplicationInsert the aluminium electrode into a suitable electrode holder and connect it to the positive pole of the plating power supply.The workpiece is connected to the negative pole according to the electroplating system being used.For consistent plating results, the following factors are particularly important:Suitable electrolyteCorrect current densityCorrect voltageAppropriate electrode distanceThorough cleaning and activation of the workpieceUniform movement during pen or tampon platingThe exact operating parameters depend on the electrolyte being used and should always be set according to the manufacturer's technical specifications.Matching Electroplating Accessories from Betzmann GalvanikBetzmann Galvanik supplies not only electrodes but also suitable electroplating power supplies, electrolytes, anode sleeves, anode pads, cables, electrode holders and other electroplating accessories.For tampon plating, the combination of a suitable aluminium electrode, anode pad and the appropriate electrolyte can provide a practical solution for localized and selective electroplating.Betzmann Galvanik offers products and solutions for gold, silver, nickel, chromium, palladium, platinum, rhodium, copper and other electroplating processes.Betzmann Galvanik – Professional Electroplating SolutionsBetzmann Galvanik provides practical solutions for professional and semi-professional electroplating and surface finishing.From pen plating and tampon plating to bath electroplating, suitable equipment, electrolytes, electrodes and accessories are available for a wide range of applications.The Ø 6 mm aluminium electrode is a practical addition to compact electroplating systems and is particularly useful for compatible Chromium(III) plating applications.ConclusionThe Ø 6 mm Aluminium Electrode (SW10012) from Betzmann Galvanik is a compact anode for suitable electroplating processes and is particularly useful with compatible Chromium(III) plating electrolytes.With its 6 mm diameter, it is ideal for pen plating, tampon plating and smaller electroplating systems.Betzmann Galvanik – professional electrolytes, electroplating equipment, electrodes and accessories for high-quality electroplating and surface finishing.

Chromium(III) Electrolyte – Ready-to-Use Chromium Plating Solution for Tank, Pen & Brush PlatingProfessional Chromium(III) Electrolyte for Bright, Hard and Corrosion-Resistant Chromium CoatingsThe Chromium(III) Electrolyte from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for depositing decorative and technical chromium coatings. Based on modern trivalent chromium (Chromium III) technology, it provides a significantly safer and more environmentally friendly alternative to conventional hexavalent chromium (Chromium VI) plating while producing brilliant, highly reflective chromium finishes.Using advanced electrolyte technology, this solution produces bright, uniform, and highly adherent chromium coatings with excellent hardness and corrosion resistance. Current densities of up to 50 A/dm² are possible, making it suitable for a wide range of decorative and industrial applications.The electrolyte is suitable for tank plating, pen plating, and brush plating, providing professional results for repairs, restoration, prototypes, and production work.Your AdvantagesModern Chromium(III) electrolyteReady-to-use solutionBrilliant mirror-like chromium finishExtremely high hardness of up to 1200 HVExcellent wear resistanceOutstanding corrosion protectionHigh adhesionNo heating requiredOperating temperature 20–45 °CWide current density rangeSuitable for tank, pen and brush platingMore environmentally friendly alternative to Chromium(VI)Professional quality from Betzmann GalvanikTypical ApplicationsPerfect for:Classic car restorationMotorcycle componentsAutomotive industryMechanical engineeringTool manufacturingJewelry productionJewelry repairWatchmakingMetal finishingModel makingDecorative metal partsElectronicsElectroplating workshopsIndustrial applicationsBrilliant Decorative and Functional Chromium CoatingsChromium is one of the most popular decorative electroplating finishes. Chromium coatings provide:Brilliant mirror finishHigh reflectivityExtremely hard surfaceOutstanding wear resistanceExcellent corrosion resistanceExcellent oxidation resistanceChromium is normally deposited using the proven plating sequence:Copper → Nickel → ChromiumThe nickel layer acts as a corrosion-resistant intermediate layer and diffusion barrier, while the chromium topcoat provides the characteristic bright chrome appearance.Typical decorative chromium thickness ranges from 0.2 to 0.5 µm.Suitable Base MaterialsThe Chromium(III) Electrolyte is ideal for plating previously metallised surfaces including:NickelCopperBrassBronzeSteelStainless steel (after suitable pretreatment)SilverGoldFor optimum results, a bright nickel undercoat is highly recommended.ApplicationBefore chromium plating, all workpieces must be thoroughly cleaned, degreased, and activated.The electrolyte operates efficiently at room temperature, eliminating the need for energy-intensive heating.For optimum coating quality, adjust voltage, electrode distance, and plating time according to the size and geometry of the workpiece.Recommended AnodesFor tank plating:AluminiumPlatinized TitaniumPlatinumIridiumFor pen and brush plating:Graphite ElectrodesNickel ElectrodesStainless Steel ElectrodesTip: Aluminium anodes provide excellent value and help maintain the bright, attractive chromium colour.Technical SpecificationsElectrolyte DataReady-to-use Chromium(III) electrolytepH value: 4–5Operating temperature: 20–45 °CRecommended Operating ConditionsCurrent density: 5–24 A/dm²Up to 50 A/dm² with solution agitationTank plating:Approx. 2.0 Volts (5 cm electrode distance)Approx. 3.2 Volts (10 cm electrode distance)Approx. 5.6 Volts (20 cm electrode distance)Pen & Brush plating:3–7 VoltsRecommended: 4–5 VoltsPlating time: 3–15 minutesDeposition rate: Approx. 0.06 µm/min at 10 A/dm² and 20 °CRecommended anodes:AluminiumPlatinized TitaniumPlatinumIridiumCoating PropertiesBrilliant mirror-like chromium finishExtremely bright appearanceHardness up to 1200 HVOutstanding wear resistanceExcellent corrosion resistanceExcellent adhesionUniform coating thicknessHigh reflectivityPremium decorative finishSafety InformationAlways wear suitable protective gloves, safety goggles, and protective clothing when handling electroplating chemicals.Use the electrolyte only in well-ventilated working areas and always follow the instructions provided in the Safety Data Sheet.Supplied AsReady-to-use Chromium(III) ElectrolyteAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops premium electroplating solutions for decorative and technical surface finishing. The Chromium(III) Electrolyte delivers brilliant chrome finishes, exceptional hardness, excellent corrosion resistance, and easy handling. It is the ideal solution for professional chromium plating using tank plating, pen plating, or brush plating while offering a modern alternative to traditional Chromium(VI) processes.