Electrode Handle

Connection cable MINUS with 2 banana plugs and a crocodile clip:   Color black  Length 1.50 meters For connection directly to the device incl. a crocodile clip.   4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Gold-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

Stainless steel electrode 4 mm This electrode is ideal for most applications in a wide range of situations. It is mainly used for degreasing, activating, and dechromating, but is also very well suited for chromating. Important! Stainless steel electrodes can cause contamination of the coating solution in other coating processes. In this case, it is recommended to use a more suitable anode, e.g., made of graphite or platinum. Stainless steel electrodes are suitable for chrome plating, and aluminum electrodes are ideal. For gold plating, use a graphite or platinum electrode. For silver plating, use a graphite or silver electrode. Length: 9.5 cm, diameter 6 mm.  The thin sleev is suitable for this purpose.

Features Used for Curved shape means greater surface contact with concave and convex shapes Re-plating headlight reflectors, Plating the bowls of spoons Touching in the parts of tin plated saucepans where the tin has worn off Double the plating rate compared to the standard electrode. Speeding up plating times of complex shaped larger objects

Connecting cable PLUS with banana plug:     Color RED  Length 1,50 meter For connection directly to the device      Color RED Length 1.50 meters For connection directly to the device incl. a stainless steel crocodile clip.     4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Gold-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

BMG- 25 amp galvanic unit - Betzmann Galvanik - Real Gold  With this device you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market.   There is no size limit from 25 A! No matter if coins, screws or 20 meters of stainless steel pipes in one piece!    - Real Gold (999-fine gold) - Rose gold, white gold, antique gold - Silver            - Nickel - alkaline or acid copper - Chrome - Black Chrome - Rhodium - black rhodium - Palladium - Platinum - zinc, tin - Bronze  So everything we have according to the price list     Scope of delivery / technical details: Basic unit Power supply unit 2.7 - 15 Volt adjustable, depending on availability 25 Ampere analog or digital display, depending on availability, power plug  High Power 25 Amp switch mode power supply with two analog or digital measuring instruments for output voltage and output current -     Technical data  Operating voltage 230 Volt-AC/ 50Hz Output voltage 3-15 Volt DC adjustable or 13,8 Volt DC fixed voltage by fixed voltage switch on the bottom side Output current 25 amps constant 25 amperes short-term Ripple & Noise <50mV load regulation <200mV line regulation <50mV Displays & movements Analogue meter for voltage and current, status Bi-colour LED red ( fault ) and green DC connection sockets screwable pole terminals Cooling Fan Security Protection against overload, overheating, short-circuit and reverse polarity protection, output voltage protection from 16.5 volts Extras dark grey metal housing with rubber feet, high efficiency > 78% by PFC (Dynamic Power Factor Correction) >0.95 maximizes the required current, high RFI stability Dimensions(WxHxD) 220x110x300 mm Weight 3.5 Kg.        

Power Unit - Rectifier 25 A galvanic unit - Betzmann Galvanik - Real Gold  With this device you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market.   There is no size limit from 25 A! No matter if coins, screws or 20 meters of stainless steel pipes in one piece!    - Real Gold (999-fine gold) - Rose gold, white gold, antique gold - Silver            - Nickel - alkaline or acid copper - Chrome - Black Chrome - Rhodium - black rhodium - Palladium - Platinum - zinc, tin - Bronze  So everything we have according to the price list     Scope of delivery / technical details: Basic unit Power supply unit 2.7 - 15 Volt adjustable, depending on availability 25 Ampere analog display,  power plug  Switching power supply (switch mode) with two analog measuring instruments for output voltage and output current Technical data Operating voltage 200-240 voltsAC/50Hz Output voltage 3-15 volts DC adjustable or 13.8 volts DC fixed voltage via fixed voltage switch on the underside Output current 25 amps Short-term output current 28 ampsPower 375 watts Ripple &amp;noise &lt;50mV Load regulation &lt;200mV Line regulation &lt;50mV Displays &amp; measuring instruments Analog meter for voltage and current, status bi-color LED red (fault) and green DC connection sockets Screwable pole terminals Cooling Fan Protection circuits Overload, overtemperature, short-circuit and reverse polarity protection, output voltage protection at 16.5 volts Extras Dark gray metal housing with rubber feet, high efficiency &gt; 78% due to PFC (Dynamic Power Factor Correction) &gt;0.95 maximizes the required current, high RFI stability Dimensions (WxHxD) 220x110x220 mm Weight 2.7 kg EAN code 4250158704367 Information for international customers: This series of HIGH POWER SWITCHING MODE DC REGULATED POWER SUPPLIES provide high current 25 amp output in a lightweight and compact size case. They are suitable for a wide range of uses, such as radio equipment, and are ideal for high power car stereo work. In addition to variable output from 3 to 15VDC, a fixed 13.8VDC can be selected. Overload, over temperature, and over voltage protection are standard. 

40 A analog power unit - Betzmann Galvanik - Real Gold  With this device you can easily coat all metallic surfaces and objects made of e.g. tin, zinc, brass, copper, nickel, silver and stainless steel and chrome-plated surfaces or chrome-plated plastic (conductive layer) with all metals available on the market.   There is no size limit from 40 A! No matter if coins, screws or 20 meters of stainless steel pipes in one piece!    - Real Gold (999-fine gold) - Rose gold, white gold, antique gold - Silver            - Nickel - alkaline or acid copper - Chrome - Black Chrome - Rhodium - black rhodium - Palladium - Platinum - zinc, tin - Bronze  So everything we have according to the price list     MAAS SPS 8400 Switching Power Supply – Powerful Power Supply Unit for Radio ApplicationsThe SPS 8400 is a compact, powerful switching power supply with an output power of up to 40 amps. Designed for professional use, this power supply is ideal for supplying radio transceivers, radio equipment, and other communications technology applications that require a stable DC voltage. It impresses with its high reliability, versatile setting options, and sophisticated safety features. Thanks to the switchable fixed voltage of 13.8 volts or the variable range from 3 to 15 volts, the device offers flexible application options. Two analog measuring instruments allow precise monitoring of output voltage and current. The SPS 8400 is aimed at ambitious radio amateurs, service technicians, and operators of communication systems who depend on a stable and powerful power supply. Technical data Operating voltage: 230 volts AC / 50 Hz Output voltage: 3–15 volts DC adjustable or 13.8 volts DC fixed voltage Output current: 40 amps constant, 43 amps short-term Residual ripple &amp; noise: &lt; 50 mVLoad regulation: &lt; 200 mV Line regulation: &lt; 50 mV Displays &amp; measuring instruments: Analog display for voltage and current, bi-color LED for operating status (green/red) DC connection sockets: Screwable pole terminals Cooling: Temperature-controlled fan Safety: Protection against overload, overheating, short circuit, reverse polarity, output voltage protection from 16.5 volts Extras: Dark gray metal housing with rubber feet, high efficiency > 78%, PFC > 0.95, high RFI stability Dimensions (WxHxD): 220 x 110 x 300 mm Weight: 3.5 kg  Scope of delivery SPS 8400 power supply unit Operating instructions  EAN code: 4044499025553 

Stainless steel electrode 6 mm This electrode is ideal for most work steps. It can mainly be used for degreasing, activating, and dechroming, and is also very good for chromium plating.Important! Stainless steel electrodes can cause contamination of the coating solution in other coating processes. In this case, it is recommended to use a more suitable anode, e.g., made of graphite or platinum. Stainless steel electrodes and, ideally, aluminum electrodes are suitable for chromium plating. Graphite or platinum electrodes are suitable for gold plating. Graphite or silver electrodes are suitable for silver plating. Length: 9.5 cm, diameter 6 mm