Brass Effect Mixer

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

K-Gold - Clear Gold Electroplating Solution – for Pen, Bath & Swab Plating (10 g) Professional cyanide-free gold electrolyte for selective and immersion plating The K-Gold electroplating solution is a premium, cyanide-free gold electrolyte designed for pen plating, swab (tampon) plating and bath electroplating. It is ideal for jewellery finishing, repair plating, precision components and controlled gold deposition on small parts. The solution deposits a high-purity gold layer (up to 24 K) with excellent adhesion and uniform thickness. It can be used pure or blended with coloured gold additives to achieve specific karat values and gold shades. Key Features & Benefits High-purity gold electrolyte (≈ 10 g Au/L equivalent) Cyanide-free formulation for safer professional use Suitable for three plating methods: – Pen plating – Swab / tampon plating – Bath (immersion) plating Excellent adhesion on nickel, copper, silver and brass (proper pretreatment required) Soft, burnishable gold deposit with high visual quality Technical Parameters Gold concentration: approx. 10 g/L equivalent Deposit purity: 99.9–100 % gold Operating voltage: – Pen / swab plating: from 3.5 V – Bath plating:  3 V (current-controlled recommended) begin with 0,1 Ampere pro cm2 Temperature: 20–25 °C Recommended anode: Carbon or platinised titanium (bath) Hardness: approx. 170–180 HV Density: approx. 19.0 g/cm³ Pen Plating Application Ideal for localised plating, repairs and touch-ups. Clean, degrease and activate surface Load plating pen or swab with K-Gold solution Apply 2–3.5 V Move evenly across the surface to build the layer Swab / Tampon Plating Application Best for controlled selective plating on larger areas. Soak swab with electrolyte Maintain gentle, even contact Keep voltage stable Repeat passes to achieve desired thickness Bath Plating Application For uniform full-surface gold plating of small components. Thorough surface preparation Fill plating bath with K-Gold solution Use carbon or platinised titanium anode Apply low current density at 2–4 V Rinse and dry after plating Notes Air-sensitive – reseal container immediately after use Can be mixed with gold colour additives for karat matching Suitable for decorative and functional gold coatings

Mixer set for measuring Real Gold Betzmann  With this mixer set consisting of 1x measuring cylinder3x pipette3 x beaker you can mix rose gold, white gold, green gold, etc. in the right proportion exactly.

Graphite Electrode Ø 6 mm – Universal Electrode for Professional ElectroplatingChemically Inert Graphite Electrode for Tank, Pen and Brush PlatingThe Graphite Electrode Ø 6 mm is manufactured from high-quality, high-density fine-grain graphite and is ideal for a wide range of electroplating applications. It is used wherever a metal-free, chemically inert electrical conductor is required and contamination of the electrolyte by metal ions must be avoided.Thanks to its excellent chemical resistance, graphite dissolves only very slowly in the electrolyte. This keeps the electrolyte composition stable and ensures high-quality, uniform plating results.The graphite electrode is perfectly suited for tank plating, pen plating and brush (tampon) plating and is compatible with a wide variety of electroplating solutions.Your AdvantagesManufactured from high-quality fine-grain graphiteChemically inertVery low wearNo contamination of the electrolyte with metal ionsExcellent chemical resistanceUniform current distributionSuitable for a wide range of electroplating processesLong service lifeFits standard 6 mm electrode holdersProfessional quality from Betzmann GalvanikWhy Use a Graphite Electrode?Many electroplating processes require that no additional metal ions enter the electrolyte, as these can negatively affect coating quality.Graphite offers several important advantages:Chemically almost inertVery low solubilityExcellent temperature resistanceGood electrical conductivityNo contamination of the electrolyteThese properties make graphite the preferred choice for many decorative and technical plating applications.Typical ApplicationsIdeal for:Gold platingSilver platingChromium platingPalladium platingPlatinum platingWhite bronze platingBlack nickel platingTank platingPen platingBrush (tampon) platingActivating solutionsCleaning solutionsWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from high-density fine-grain graphite and offers:Excellent chemical resistanceGood electrical conductivityLow wearSlow consumption in the electrolyteLong service lifeApplication InstructionsBefore use:Keep the electrode clean and free from greaseUse a suitable electrolyteFollow the recommended voltage and current settingsDuring operation, the graphite electrode wears only slowly. Replacing it when necessary ensures consistently high-quality plating results.Technical SpecificationsMaterial: High-density fine-grain graphiteDiameter: 6 mmExcellent chemical resistanceVery good electrical conductivitySuitable for standard electrode holdersPackage Contents1 × Graphite Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Graphite Electrode Ø 6 mm offers excellent chemical resistance, long service life and universal compatibility, making it the ideal choice for hobby users, workshops and industrial applications.

Gold Electrolyte 8 g/L – 24K Hard Gold PlatingProfessional gold plating electrolyte containing 8 g of gold per liter for high-quality 24K gold deposits – suitable for tank plating, pen plating and tampon plating.This high-quality Gold Electrolyte 8 g/L is designed for producing uniform, durable and visually attractive 24-karat gold coatings. It can be used for conventional tank electroplating as well as for selective gold plating with a plating pen or tampon system.Ideal for jewelry, watches, metal components, restoration, repair work, model making, prototypes, individual pieces and professional surface finishing.Key Benefits8 g gold per liter24K gold / 99.9% goldSuitable for tank electroplatingSuitable for pen plating / brush platingSuitable for tampon plating / selective electroplatingHigh deposition performanceProduces uniform, high-quality gold depositsSuitable for professional applications and repair workAvailable in different container sizesTechnical support directly from Betzmann GalvanikTechnical DataParameterSpecificationGold content8 g/LGold purity99.9%Gold quality24KWorking voltageapprox. 3–5 VRecommended temperatureapprox. 14–25 °CDeposition rateapprox. 0.5 µm/min at 3.5 VMaximum recommended thicknessup to approx. 5 µmHardnessapprox. 220–230 HVSuitable anodePlatinum or carbonPlease note: Actual deposition rate and achievable coating thickness depend on the substrate, surface preparation, current density, temperature, electrolyte movement and plating time.Suitable for Tank, Pen and Tampon PlatingThis electrolyte offers excellent versatility for different gold-plating applications.With tank electroplating, complete components or assemblies can be coated with a uniform gold layer.For repairs, partial areas and difficult-to-reach surfaces, pen plating and tampon plating are particularly useful. These methods allow gold to be deposited selectively exactly where it is required, without immersing the entire component in a plating bath.Typical applications include:Gold plating repairsSelective gold platingJewelry and watchesElectrical contact areasMetal fittings and componentsIndividual partsRestoration workDecorative surface finishingPrototyping and small-batch productionCorrect Surface Preparation Is EssentialA high-quality gold coating always starts with proper surface preparation.The substrate must be thoroughly cleaned, degreased and properly activated before plating. Depending on the base material, an appropriate intermediate layer may also be required.Different substrates such as copper, brass, silver, stainless steel, steel, zinc alloys and aluminum require different preparation and activation procedures.For demanding applications, we recommend selecting the complete plating sequence according to the specific substrate and intended use.High-Quality 24K Gold DepositsWith an 8 g/L gold concentration, 24K gold and a hardness of approximately 220–230 HV, this electrolyte is suitable for producing attractive and relatively wear-resistant gold coatings.Depending on the application, thin decorative coatings or thicker functional gold layers can be deposited. For components exposed to mechanical wear, sufficient coating thickness is essential.Professional Gold Plating for Industry, Workshops and Individual ApplicationsWhether you are looking for a solution for complete tank plating or precise repair and selective plating with a pen or tampon, this 8 g/L Gold Electrolyte provides a versatile solution for professional gold plating applications.Betzmann Galvanik provides technical advice on electrolyte selection, surface preparation and the appropriate electroplating process for your application.Order Gold Electrolyte 8 g/LProfessional 24K Gold Electrolyte for tank plating, pen plating and tampon plating – ideal for gold plating, repair work, restoration and high-quality surface finishing.If you are unsure which preparation or intermediate layer is required for your particular substrate, please contact us for technical advice.