Gold Flash

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Gold Electrolyte 4 g/L (BMG-077-TG-M) Premium Plating Solution for Bright, Hard Gold Coatings Short Description The Gold Electrolyte 4 g/L (BMG-077-TG-M) is a high-performance electroplating solution with approximately 4 grams of gold per liter. It produces hard, even and highly reflective gold coatings and is suitable for bath, pen and pad plating applications on a variety of metal substrates. Applications This electrolyte is ideal for: Gold plating of metallic parts via bath immersion, pen (brush) or pad plating Decorative and functional gold coatings with excellent adhesion Contacts and components requiring corrosion resistance and conductivity Use in jewelry, electronics, precision parts and artistic finishes  Benefits Fast deposition rate under controlled conditions Hard, abrasion-resistant gold layers with high gloss Consistent, even layer build-up on complex surfaces Compatible with multiple plating methods Works well on substrates like stainless steel, copper, brass, nickel and silver Technical Parameters (Guidelines) PropertyValue / RangeGold concentrationapprox. 4 g/LRecommended voltageabout 5 V (platinum electrode)Operating temp18 – 40 °CpH4.3 – 4.5Deposition rate~0.15 µm/min at 0.01 A/cm², 20 °CMax layer thickness~4 µmDeposit purity99.9 % AuHardness190–210 HVDensity19.3 g/cm³Cathode efficiency~25 %ElectrodesPlatinum preferred, graphite possibleAgitationlow to vigorous  How to Use (Practical Guide) Preparation: Polish parts before plating; a smooth surface improves final luster. Clean & Activate: Thoroughly degrease and activate surfaces to ensure maximum adhesion. Plating: Begin with a platinum electrode at ~5 V and adjust as needed. Post-Treatment: Rinse in deionized water and dry; gentle polishing enhances shine. Storage & Shelf Life Store away from direct sunlight Shelf life: approx. 1–2 years with proper storage Replenish gold content as needed for extended bath use  Safety Information Contains potassium cyanide (approx. 0.15%) — handle with care Wear protective gloves, goggles and suitable clothing Avoid contact with skin and eyes; rinse thoroughly if contact occurs Use in well-ventilated areas Keep out of reach of children Dispose of chemicals according to local regulations Conclusion The Gold Electrolyte 4 g/L (BMG-077-TG-M) delivers bright, hard and durable gold coatings suitable for numerous electroplating applications. Its versatility across bath, pen and pad methods makes it a dependable choice for hobbyists and professionals alike

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Gold Electrolyte BMG‑067M High-Quality Gold Plating Electrolyte – 8 g Gold per Liter Short Description The Gold Electrolyte BMG‑067M is a ready-to-use plating solution for electrolytic gold deposition on metal surfaces. Containing 8 grams of pure gold per liter, it produces bright, shiny, and corrosion-resistant gold layers on conductive metals. Suitable for hobbyists, workshops, and professional use, it can be applied in tank plating as well as brush or tampon plating. Applications The gold electrolyte is ideal for: Decorative gold plating (jewelry, accessories, design objects) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems (e.g., Copper → Nickel → Gold) For best results, surfaces should be polished, degreased, and activated before plating. How it Works (Simple Explanation) Polish: Prepare the surface to a high gloss. Clean: Degrease thoroughly (e.g., with an electrocleaner). Activate: Chemically treat the surface with an activator. Plating: Using direct current and a suitable anode (platinum or graphite), gold is deposited from the solution. The result is a thin, uniform gold layer with a high purity of 99.9%, which is bright, corrosion-resistant, and long-lasting. Advantages Easy to use for beginners and professionals Produces shiny, uniform gold layers High purity gold deposit (99.9%) Suitable for tank, brush, and tampon plating Versatile for decorative and technical applications Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solutionGold contentapprox. 8 g/LpHacidic, lowOperating temperature14–25 °CVoltage3–5 VRecommended anodePlatinum or graphiteGold content in deposit99.9 % (rest carbon)Deposition rateapprox. 0.5 µm/min at 3.5 VCathode efficiencyapprox. 35–40 %Maximum layer thicknessup to 10 µmLayer hardnessapprox. 220–230 HVDeposit densityapprox. 19.3 g/cm³Storageprotect from direct sunlightShelf lifeapprox. 1–2 years Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at 3–5 V with a platinum or graphite anode Partial plating: Masking possible (e.g., tape, nail polish) Sloped surfaces: Use of a leveling agent or thickener can reduce material loss Safety Instructions Gold electrolytes contain chemical components and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Hazard statements: H302 (harmful if swallowed), H313 (may be harmful in contact with skin), H317 (may cause allergic skin reaction). Scope of Delivery Gold Electrolyte BMG‑067M Quantity according to selection Conclusion The Gold Electrolyte BMG‑067M is a powerful and versatile solution for gold plating, delivering bright, uniform, and corrosion-resistant gold layers. It is suitable for decorative applications (jewelry, accessories) and technical applications (contact surfaces, circuit boards). With easy handling, high gold purity, and precise deposition, it is ideal for hobbyists, workshops, and professional plating operations. Combined with proper surface preparation and activation, it ensures top-quality, durable, and visually outstanding results.

Dice set - gold-plated   Type: Gold-plated metal dice Weight: approx. 60g Size: see pictures Material: Copper-zinc alloy   Features: 1. the gold numbers in easy-to-read font stand out clearly against the background. 2. the metal dice are made of environmentally friendly material, gold-plated, smooth, lightweight, durable, oxidation-resistant.   Scope of delivery: 5 pieces of gold-plated dice

Stainless Steel Electrode Ø 6 mm (BMG-007) Short Description The Stainless Steel Electrode Ø 6 mm is a versatile plating electrode designed for a wide range of electroplating tasks, especially degassing, activation, dechroming and chrome plating. Suitable for pen, bath and pad electroplating, it delivers consistent current flow and durable performance in your plating setups.  Product Description This electrode is made from corrosion-resistant stainless steel with a diameter of 6 mm and a length of approx. 9.5 cm, making it a compact and easy-to-handle tool for many galvanic applications. It is particularly effective for: Degreasing and activating metal surfaces prior to plating Dechroming or preparing surfaces for subsequent layers Chrome plating processes where robust anode performance is needed Pre-treatment and cleaning steps during electrochemical work  It fits standard holders and electrode grips used in pen and tampon plating and provides reliable performance in repeated or continuous use.  Key Benefits Durable stainless steel construction: Offers good chemical resistance and long service life.  Broad compatibility: Well-suited for degreasing, activation and dechroming operations.  Effective for chrome plating: Works particularly well in chromic electroplating applications. Standard size: Ø 6 mm fits most electrode handles and plating tools.  Easy to use: Ergonomic size and reliable conductivity promote smooth workflows.  Usage Tips Clean and degrease surfaces before using the electrode for best results. In plating processes such as gold or silver, consider using a graphite or platinum electrode instead, as stainless steel may contaminate some plating baths.  For chrome plating, stainless steel may be used effectively, sometimes in combination with aluminium electrodes.  Conclusion The Stainless Steel Electrode Ø 6 mm is a reliable, robust and versatile tool for a variety of electroplating and surface preparation tasks – especially degreasing, activation and chrome plating. Its solid construction and compatibility with standard plating systems make it a valuable addition to any workshop or lab.

Black Chrome (Smoky Chrome) Electrolyte BMG‑108.3 Decorative Black Chrome Plating Solution – Striking Dark Metallic Finish Short Description The Black Chrome (Smoky Chrome) Electrolyte BMG‑108.3 is a specialized electroplating solution for producing dark metallic black chrome coatings on metal surfaces. This finish delivers a dramatic anthracite to deep black shimmer that is highly sought after for decorative and design‑oriented applications. It is a compelling alternative to black rhodium or black ruthenium plating and provides a distinctive, eye‑catching surface effect.  What is Black Chrome Plating Used For? Black chrome plating is used when high contrast, dark metallic visual aesthetics are desired. Typical uses include: Decorative finishes on automotive trim and accessories Consumer electronics and luxury items Jewelry and fashion hardware High‑end metal components where a stylish black surface is preferred Coatings over copper, nickel, gold or gold flash finishes Compared with bright chrome, black chrome offers a unique visual style while still benefiting from chromium’s metallic properties. How Does Black Chrome Plating Work? (Simple Explanation) Black chrome plating is an electrolytic process in which chromium is deposited onto a prepared base layer (e.g., nickel, copper or gold) using direct current: Surface preparation: The base metal must be clean, polished and thoroughly degreased. Electroplating: The workpiece is connected as the cathode (negative pole). A suitable anode (such as graphite or platinum) is used as the positive pole. Controlled plating: Under controlled voltage and temperature conditions, chromium ions are reduced and deposit as a dark, metallic black layer. Finish: After plating, parts are rinsed and dried to reveal the final black chrome finish. This plated layer combines decorative appeal with the corrosion resistance typical of chromium coatings. Key Benefits of Black Chrome Electrolyte BMG‑108.3 Produces a dark anthracite to black chrome finish that stands out visually Works over copper, nickel, gold or other metal bases Suitable for tank plating, brush plating and other methods Creates a metallic look distinct from painted or powder‑coated black surfaces Ideal for decorative, hobby, custom, and high‑end metalwork applications No special storage requirements; easy to handle in typical galvanic setups Technical Parameters Typical operating values for this black chrome plating solution are as follows: PropertyValue / RangeElectrolyte typeBlack chrome plating solutionVoltage range9–11 V (use slightly higher voltage with platinum anode)Operating temperature20–30 °CLightness (L*) of deposit65–70 % (dark metallic)Recommended electrodeCarbon or platinum electrodeChromium content in plate~99 % (balance carbon)Plating rate (10 V, carbon)~2 µm / min (spot)Maximum plating thickness~3 µmHardness (as plated)800 HVHardness after heat treatment1500–1600 HVDeposit density~7.2 g/cm³Shelf life1–2 yearsHazard classificationNot classified as dangerousTransport classNot classified as hazardous for transport Notes: Heat treatment at ~220 °C increases hardness significantly. When using a platinum electrode, slightly higher voltage (max. 11 V) is recommended for consistent coverage. Stainless steel anodes are generally not recommended for most plating processes Practical Application Tips Surface preparation: Polishing and thorough degreasing significantly improve adhesion and finish quality. Base layers: Black chrome often performs best over nickel or gold flash layers, but can also be applied on copper or other well‑prepared substrates. Electrode choice: Graphite electrodes are commonly used for black chrome plating due to wide compatibility and stable performance. Heat post‑treatment: Optional heat treatment enhances hardness and mechanical resistance. Safety Information Although not classified as a dangerous transport substance, proper safety measures are required: Wear chemical‑resistant gloves, safety goggles and protective clothing Avoid skin and eye contact Wash immediately with water if contact occurs Work only in well‑ventilated areas Observe local disposal regulations for plating waste Conclusion The Black Chrome (Smoky Chrome) Electrolyte BMG‑108.3 is a specialized plating solution for creating striking dark chrome finishes that are both decorative and durable. It works well over a range of base metals and is suitable for hobby projects, customized finishes, automotive detail work and other applications where a unique black metallic surface is desired. By following proper surface preparation and recommended operating parameters, you can achieve consistent and visually impressive results every time.

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.