Gold Solution 4 Gramm /Liter

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Gold Flash Electrolyte (BMG‑084.5) Ultra‑Thin Gold Plating Solution for Base and Decorative Layers Short Description The Gold Flash Electrolyte (BMG‑084.5) is a specialized electroplating solution designed to deposit a very thin, high‑purity gold layer (“flash plating”). This ultrathin gold layer serves as an ideal base coat or decorative coating on metallic surfaces. real-gold.de Applications This gold flash electrolyte is suitable for: Very thin gold coatings („flash“ plating) Adhesion base for subsequent plating layers Decorative accent coatings on jewelry and metal parts Electrically conductive surfaces and contacts Foundation for further electroplating processes It provides excellent adhesion and a bright metallic appearance with minimal material usage. real-gold.de How Flash Gold Plating Works (Simple Explanation) Flash gold plating deposits a very thin gold layer using direct current: Clean and degrease the surface Activate for best conductivity Flash plating: Apply current – gold ions are reduced on the surface Optional finish: Rinse and dry or apply further coatings This process is ideal for achieving a thin but continuous gold surface layer with low material consumption. real-gold.de Benefits of Gold Flash Electrolyte Ultra‑thin, uniform gold coatings Excellent adhesion on metal surfaces Suitable for decorative and functional uses Compatible with tank, brush, and pad plating Ideal as base layer for additional plating steps real-gold.de Typical Parameters PropertyValue / RangeElectrolyte typeGold flash plating solutionGold contentapprox. 2 g/LLayer purity99.9 % goldVoltage4.0–6.0 VTemperature14–25 °CDeposition rateUltra‑thin “flash” layerAnodePlatinum or graphiteHardnessapprox. 180–190 HVDensityapprox. 19 g/cm³ real-gold.de Application Notes Prepare surface: Clean and degrease thoroughly. Activate: To enhance conductivity before plating. Flash plating: Run the electrolyte at recommended voltage. Finish: Rinse, dry, and optionally proceed with other layers. Safety Information Wear protective gloves, goggles, and suitable clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose of waste according to local regulations Conclusion The Gold Flash Electrolyte (BMG‑084.5) delivers ultra‑thin and highly adherent gold layers that are perfect for use as a base or decorative finish in electroplating. Its versatility and ease of use make it suitable for both hobby and professional electroplating applications where fine, bright gold coatings are desired. real-gold.de

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Gold Electrolyte BMG‑067M High-Quality Gold Plating Electrolyte – 8 g Gold per Liter Short Description The Gold Electrolyte BMG‑067M is a ready-to-use plating solution for electrolytic gold deposition on metal surfaces. Containing 8 grams of pure gold per liter, it produces bright, shiny, and corrosion-resistant gold layers on conductive metals. Suitable for hobbyists, workshops, and professional use, it can be applied in tank plating as well as brush or tampon plating. Applications The gold electrolyte is ideal for: Decorative gold plating (jewelry, accessories, design objects) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems (e.g., Copper → Nickel → Gold) For best results, surfaces should be polished, degreased, and activated before plating. How it Works (Simple Explanation) Polish: Prepare the surface to a high gloss. Clean: Degrease thoroughly (e.g., with an electrocleaner). Activate: Chemically treat the surface with an activator. Plating: Using direct current and a suitable anode (platinum or graphite), gold is deposited from the solution. The result is a thin, uniform gold layer with a high purity of 99.9%, which is bright, corrosion-resistant, and long-lasting. Advantages Easy to use for beginners and professionals Produces shiny, uniform gold layers High purity gold deposit (99.9%) Suitable for tank, brush, and tampon plating Versatile for decorative and technical applications Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solutionGold contentapprox. 8 g/LpHacidic, lowOperating temperature14–25 °CVoltage3–5 VRecommended anodePlatinum or graphiteGold content in deposit99.9 % (rest carbon)Deposition rateapprox. 0.5 µm/min at 3.5 VCathode efficiencyapprox. 35–40 %Maximum layer thicknessup to 10 µmLayer hardnessapprox. 220–230 HVDeposit densityapprox. 19.3 g/cm³Storageprotect from direct sunlightShelf lifeapprox. 1–2 years Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at 3–5 V with a platinum or graphite anode Partial plating: Masking possible (e.g., tape, nail polish) Sloped surfaces: Use of a leveling agent or thickener can reduce material loss Safety Instructions Gold electrolytes contain chemical components and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Hazard statements: H302 (harmful if swallowed), H313 (may be harmful in contact with skin), H317 (may cause allergic skin reaction). Scope of Delivery Gold Electrolyte BMG‑067M Quantity according to selection Conclusion The Gold Electrolyte BMG‑067M is a powerful and versatile solution for gold plating, delivering bright, uniform, and corrosion-resistant gold layers. It is suitable for decorative applications (jewelry, accessories) and technical applications (contact surfaces, circuit boards). With easy handling, high gold purity, and precise deposition, it is ideal for hobbyists, workshops, and professional plating operations. Combined with proper surface preparation and activation, it ensures top-quality, durable, and visually outstanding results.

Covering pen for partial coating Betzmann Galvanotechnik:   Use this concealer pen to cover areas that are not to be coated. Simply apply the liquid agent, let it dry and then you can coat. After the process, simply rub off like an eraser.