Dice set - gold-plated

High-Performance Gold Flash Electrolyte for Professional Results The Gold Flash Gold Electrolyte is a premium electroplating solution designed for selective brush plating, swab plating, and bath electroplating processes. It enables fast, uniform, and highly adhesive gold layers on a wide range of metal surfaces. Perfect for jewelry finishing, repairs, technical applications, and decorative coatings, this electrolyte delivers consistent and reliable results from beginner to professional use. Operating Conditions and Deposit Data (Gold Plating Solution) Voltage Range: 4.0 – 6.0 volts Temperature: 14 – 25 °C Gold Concentration: 2 g/l Electrode Material: Platinum or Carbon (see notes) Gold Content in Deposit: 99.9% (balance: carbon) Plating Rate (at 5.0 V, platinum electrode): approx. 0.12 micron per minute (spot plating) Hardness: 180 – 190 HV Deposit Density: 19.3 g/cm³ Internal Stress: low to medium Storage and Shelf Life Storage Conditions: Protect from direct sunlight Shelf Life: Over 3 years Application Notes The use of stainless steel anodes is strongly discouraged for most plating processes. Plating rates are based on a reference area continuously covered by the swab during operation. Application Instructions (Beginner to Professional) 1. Surface Preparation (Critical Step) Thoroughly clean the surface (remove grease, oil, dirt) Activate the surface (acid dip / activator) Rinse with deionized water  Proper preparation ensures maximum adhesion and durability. 2. Brush Plating (Selective Gold Plating) Parameters: Voltage: 4 – 8 V Movement: steady, circular continuous electrical contact Process: Apply electrolyte to plating brush Connect workpiece as cathode (negative pole) Move brush (anode) evenly across surface Maintain constant movement Stop once desired thickness is reached  Ideal for precision work, repairs, and small areas 3. Swab Plating (Controlled Application) Parameters: Voltage: 5 – 10 V Pressure: light to moderate Movement: uniform, overlapping Process: Soak swab with electrolyte Apply evenly across surface Use overlapping strokes Repeat for thicker layers Ideal for medium surfaces and controlled coatings 4. Bath Electroplating (Full Immersion Process) Parameters: Voltage: 2 – 6 V Current density: 0.1 – 1 A/dm² Time: 30 seconds to several minutes Process: Fill plating bath with electrolyte Connect workpiece as cathode Position anode correctly Immerse workpiece Monitor current and time Rinse and dry after plating Ideal for uniform coatings and professional applications Important Process Guidelines Always work on a clean, grease-free surface Avoid interruptions during plating Maintain stable temperature and voltage Prevent contamination of the electrolyte Use proper rinsing between steps Professional Tips Pre-plating (nickel or palladium) improves adhesion Apply multiple thin layers instead of one thick layer Monitor bath composition regularly Increase voltage gradually for optimal deposition Applications Jewelry plating and restoration Decorative gold coating Electrical contacts and precision parts Workshop and industrial use Why This Electrolyte? This gold electrolyte offers maximum control, excellent adhesion, and brilliant gold finish across all plating methods—making it a reliable choice for both beginners and professionals.

Graphite Electrode Ø 6 mm (BMG‑010) Short Description The Graphite Electrode Ø 6 mm (BMG‑010) is a durable, chemically inert electrode rod made from high‑density fine‑grain graphite. Designed for use as an anode or electrode in electroplating processes, it is ideal for bath, pen, and pad plating applications where a clean, metal‑free current supply is essential.  Product Description This graphite electrode is manufactured from highly compressed fine‑grain graphite, which dissolves only slowly in electrolytes. Unlike metallic anodes, graphite does not shed contaminating metal particles, ensuring cleaner coatings and higher deposit quality.  The 6 mm diameter rod, with an approximate length of 95 mm, fits standard plating fixtures, holders, and pen plating tools, making it easy to integrate into various electroplating setups Typical Applications Electroplating processes (e.g., silver, gold, copper, black nickel, chrome, white bronze) Pen, bath, and pad plating Activation and pre‑treatment steps Counter‑electrode or anode use in a wide range of electrolytes Situations where metal contamination must be avoided Key Benefits Chemically inert: prevents unwanted metal ion contamination in the plating bath. Versatile: compatible with most electroplating chemistries and techniques.  Slow wear: dissolves gradually, extending service life. Affordable: cost‑effective solution for frequent use.  Easy to use: fits common plating holders and pen plating tools. Material & Dimensions Material: High‑density fine‑grain graphite Diameter: 6 mm Length: approx. 95 mm (other lengths may be available)  Practical Tips Ensure electrodes are clean and free of oils before use.  Replace electrodes periodically as they slowly dissolve during electroplating. Graphite’s mild warming effect can help stabilize bath temperature during plating. Conclusion The Graphite Electrode Ø 6 mm is an effective and reliable anode/electrode for a wide range of electroplating applications. Its inert behavior, broad compatibility, and metal‑free current delivery make it a solid choice for hobbyists, workshops, labs, and professional plating operations.

Gold Electrolyte 8 g/L – High-Performance Gold Plating SolutionFast Deposition & Brilliant Gold CoatingsThis high-quality gold electrolyte with 8 g/L gold content is designed for demanding and professional gold plating applications. It enables fast deposition rates, intense gold color, and uniform, highly adhesive coatings.Suitable for bath plating, brush plating, and pad plating – ideal for jewelry, technical components, and industrial use.Key Benefits✔ High gold content (8 g/L) for fast plating results✔ Bright, rich gold color✔ Uniform and highly adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for professional and industrial applications✔ Compatible with pre-plating (silver, palladium, platinum)Technical SpecificationsParameterValue / RecommendationGold Content8 g/LVoltage (Bath)approx. 2.5 – 4.0 VVoltage (Brush/Pad)approx. 3.0 – 6.0 VTemperature18 – 28 °CpH Valueneutral to slightly acidic (system dependent)ElectrodesPlatinum or graphiteDeposition RatefastLayer Thicknessadjustable via time & current💡 Note: Higher gold content allows faster deposition and thicker layers in a shorter time.ApplicationsJewelry (rings, chains, watches)Electrical contacts and connectorsTechnical componentsRepair and restoration of gold coatingsProfessional and industrial productionWhen to Use 8 g/L Gold ElectrolyteApplicationSuitabilityFast plating⭐⭐⭐⭐⭐Thick layers⭐⭐⭐⭐⭐Professional use⭐⭐⭐⭐⭐Fine decorative plating⭐⭐⭐⭐☆👉 Conclusion: Ideal for users who need efficient, fast, and high-quality gold plating.Application – Step by StepClean and degrease the surface→ essential for adhesionActivate the material→ use an appropriate activatorGold plating process→ apply electrolyte (bath, brush, or pad)Post-treatment→ rinse and finish💡 Pro Tip: Surface preparation determines up to 80% of the final coating quality.CompatibilityThis gold electrolyte can be used with:Galvanic systems (bath plating)Brush plating devicesPad plating systems👉 Also compatible with:Silver, palladium, or platinum pre-platingDifferent electrode types (platinum recommended)Practical ExamplesGold plating a ring within minutesFast coating of electrical contactsConsistent results in series productionFrequently Asked Questions (FAQ)Why use 8 g/L gold electrolyte?It enables faster deposition, thicker coatings, and professional results.Is it suitable for beginners?Yes, with proper preparation and basic knowledge, it is easy to use.How durable is the gold coating?With correct application, the coating is highly durable and wear-resistant.Which electrode is recommended?Platinum electrodes provide the most stable and high-quality results.Recommended AccessoriesPower supplies and rectifiersElectrodes (platinum or graphite)Cleaners and activatorsComplete galvanic systems👉 The right combination of equipment, electrolyte, and electrode ensures optimal results.Order Gold Electrolyte 8 g/L NowAchieve fast, brilliant, and professional gold plating results with a high-performance electrolyte.👉 Order now and start plating with precision and efficiency.