Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Sleeve - Swab - Anode fabric pad - Anode covers, thick, multi-layered - Replacement covers for pad electroplating from Betzmann Galvanik This thick, very robust anode fabric pad consists of several layers of fabric sewn together and is ideal for coating any surface. It does not wear out so quickly, especially on rough or coarse surfaces. At the lower end there are 2 insertion holes for the anode rod up to 6mm (for 8mm you can enlarge the holes with scissors or a knife. If this has already worked its way through the fabric at the top, you can continue to use the anode fabric pad by inserting it into the other insertion hole. Please soak the pad thoroughly before use, otherwise it will not conduct. Scope of delivery: 1 piece!

Big Swab: For use with the flat Stainless Steel Electrode and flat Platinum Electrode for electroplating large surfaces.Our swabs will last a long time if thoroughly rinsed under running water after each use.Size: 5 x 10 cm    

Replacement felts for our Betzmann Electroplating Galvano Pen   1 bag = 10 pieces

Anode cloth pad - thin, multi-layered anode covers - replacement covers for pad electroplatingfrom Betzmann Galvanik This thin, very robust anode fabric pad consists of several layers of fabric sewn together and is ideal for coating any surface of small, delicate filigree areas or localized coatings.It does not wear out so quickly, especially on rough or coarse surfaces. At the lower end there are 2 insertion holes for the anode rod up to 4 mm (for 6 mm electrodes, the holes can be enlarged using scissors or a knife. If this has already worked its way through the fabric at the top, you can continue to use the anode fabric pad by inserting it into the other insertion hole. Please soak the pad thoroughly before use, otherwise it will not conduct. Scope of delivery: 1 piece!

Big Swab XL: For use with the  Large Stainless Steel Electrode and Large Platinum Electrode for electroplating large surfaces. Our swabs will last a long time if thoroughly rinsed under running water after each use. Size: 6 x 12 cm