Silver Electrolyte 30 g/L – Premium Silver Plating Solution for Tank, Pen & Brush PlatingProfessional Silver Electrolyte for Bright, Conductive and High-Quality Silver CoatingsThe Silver Electrolyte 30 g/L from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for depositing high-purity silver coatings on conductive metal surfaces. With a silver concentration of 30 grams per litre, this electrolyte provides fast deposition rates, brilliant finishes and outstanding electrical conductivity.The electrolyte is suitable for tank plating, pen plating and brush plating (swab plating), delivering professional results for both decorative and technical applications. Whether you are plating jewellery, electronic components, electrical contacts, cutlery or restoration projects, this silver plating solution produces uniform, highly adherent and durable silver deposits.Your Advantages at a Glance30 g of silver per litreReady-to-use professional electrolyteSuitable for tank plating, pen plating and brush platingBright, uniform silver depositsOutstanding electrical and thermal conductivityExcellent adhesionEven metal depositionSuitable for decorative and technical applicationsIdeal for hobbyists, workshops and industrial usersPremium quality from Betzmann GalvanikWhy Electroplate with Silver?Silver offers the highest electrical conductivity of all metals, combined with excellent thermal conductivity and an attractive bright white appearance. It is one of the most widely used precious metals in electroplating for both decorative and functional applications.Silver plating is commonly used for:Decorative finishesElectrical contactsPrinted circuit boards (PCBs)Connectors and terminalsJewelleryWatchesCutleryMusical instrumentsPrecision componentsRestoration workIn addition to its elegant appearance, a silver coating significantly improves conductivity while providing excellent wear resistance and protection against oxidation.Suitable Base MaterialsThe Silver Electrolyte is suitable for plating:CopperBrassBronzeNickelSteel (with appropriate pre-treatment)Stainless steel (after Nickel Strike activation)SilverCopper-plated componentsDepending on the substrate, we recommend using the appropriate activator or intermediate layer to achieve maximum adhesion.Recommended Plating StructureFor maximum durability and long-term colour stability, the following plating sequence is recommended:Base Material → Copper → Nickel → SilverThe nickel layer acts as a diffusion barrier, preventing copper migration into the silver coating and ensuring a bright, tarnish-resistant finish.Typical ApplicationsIdeal for:Jewellery manufacturingJewellery repairWatchmakingElectronicsPrinted circuit boards (PCBs)Electrical contactsConnectorsMusical instrumentsRestorationClassic carsModel makingLaboratoriesIndustrial electroplatingProfessional metal finishingApplicationBefore silver plating:Thoroughly clean and degrease the workpiece.Remove all oxide layers.Activate the surface according to the base material.During plating:For tank plating, immerse the workpiece completely in the electrolyte.For pen plating or brush plating, keep the electrode moving continuously across the surface to ensure uniform metal deposition.After plating, rinse the workpiece thoroughly with clean water and dry completely.Technical SpecificationsSilver concentration: 30 g/LOperating temperature: 15–30 °CpH value: Slightly acidic to neutralCurrent density: 0.5–3 A/dm²Tank plating voltage: Approx. 1.5–3.5 VPen & brush plating voltage: Approx. 3–7 VRecommended anodes: Platinum, graphite or silverCoating thickness: Approx. 1–5 µm (depending on plating time)Deposit purity: >99.9% silverThe above parameters are recommended values and may vary depending on workpiece geometry, electrode spacing and plating equipment.Safety InformationWear protective gloves and safety goggles.Avoid skin and eye contact.Use only in well-ventilated areas.Keep out of reach of children.Always follow the Safety Data Sheet (SDS).Quality from Betzmann GalvanikThe Silver Electrolyte 30 g/L from Betzmann Galvanik has been developed to meet the highest standards in modern electroplating. Its high silver concentration, excellent conductivity and easy handling make it ideal for decorative silver plating as well as demanding industrial applications. Combined with Betzmann Galvanik power supplies, electrodes and accessories, it delivers brilliant, durable and professional silver finishes every time.

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.

Gold Electrolyte – 2 g/L Gold Plating Solution (BMG-077-TG-2GM)Brilliant, Durable Gold CoatingsOur high-quality Gold Electrolyte (2 g/L) allows uniform, brilliant, and long-lasting gold plating. Perfect for jewelry, technical parts, and professional applications requiring high corrosion resistance, conductivity, and optical perfection.Suitable for bath plating, brush plating, and pad plating.💡 Note: Always ensure proper cleaning and surface preparation for best results.Key Benefits✔ Bright, mirror-like gold finish✔ Excellent wear and abrasion resistance✔ High corrosion and tarnish protection✔ Uniform, adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for jewelry, watches, and technical components✔ Can be combined with palladium or rhodium pre- and post-coatingsTechnical SpecificationsParameterValue / RecommendationGold Content2 g/LVoltage (Bath)2.0 – 4.0 VVoltage (Brush/Pad)3.0 – 6.0 VTemperature20 – 40 °CpH Valuestrongly acidicElectrodesPlatinum or titaniumCoating Colorbright yellow goldLayer Thickness0.1 – 2 µm (adjustable)Depositionuniform & controllable💡 Pro Tip: A pre-layer of palladium improves adhesion and reduces surface imperfections.ApplicationsJewelry (rings, chains, gold alloys)Watches and luxury itemsElectrical contacts and connectorsPrecision technical componentsDecorative and protective coatingsApplication – Step by StepClean & degreaseActivate surfacePre-plating (optional but recommended) – palladium or nickelGold plating – bath, brush, or padPost-treatment – rinse, dry, optional protective layer💡 Pro Tip: Use a clean platinum electrode and proper current density to achieve the most uniform, high-brightness finish.CompatibilityElectroplating bathsBrush plating devicesPad plating systems👉 Can be combined with:Palladium or rhodium pre-coatingCorrect electrodes and fabric padsPractical ExamplesGold-plated rings and chains with high brillianceTechnical contacts with wear-resistant gold finishDecorative items with precise, even gold layersFAQWhy use gold electrolyte?For a brilliant, conductive, and corrosion-resistant gold layer.How thick should the gold layer be?Depends on application: decorative 0.1–0.5 µm, technical 1–2 µm.Is it suitable for beginners?Yes, with proper cleaning, activation, and controlled current.Which electrode works best?Platinum electrodes produce the most stable, uniform results.Recommended AccessoriesPower supply / rectifiersElectrodes (Platinum / Titanium)Cleaners & activatorsGalvanic plating systemsOrder Gold Electrolyte 2 g/L NowAchieve high-brightness, durable, professional gold coatings for jewelry, electronics, and technical applications.👉 Order now and create perfect surfaces.

Gold Electrolyte 8 g/L – High-Performance Gold Plating SolutionFast Deposition & Brilliant Gold CoatingsThis high-quality gold electrolyte with 8 g/L gold content is designed for demanding and professional gold plating applications. It enables fast deposition rates, intense gold color, and uniform, highly adhesive coatings.Suitable for bath plating, brush plating, and pad plating – ideal for jewelry, technical components, and industrial use.Key Benefits✔ High gold content (8 g/L) for fast plating results✔ Bright, rich gold color✔ Uniform and highly adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for professional and industrial applications✔ Compatible with pre-plating (silver, palladium, platinum)Technical SpecificationsParameterValue / RecommendationGold Content8 g/LVoltage (Bath)approx. 2.5 – 4.0 VVoltage (Brush/Pad)approx. 3.0 – 6.0 VTemperature18 – 28 °CpH Valueneutral to slightly acidic (system dependent)ElectrodesPlatinum or graphiteDeposition RatefastLayer Thicknessadjustable via time & current💡 Note: Higher gold content allows faster deposition and thicker layers in a shorter time.ApplicationsJewelry (rings, chains, watches)Electrical contacts and connectorsTechnical componentsRepair and restoration of gold coatingsProfessional and industrial productionWhen to Use 8 g/L Gold ElectrolyteApplicationSuitabilityFast plating⭐⭐⭐⭐⭐Thick layers⭐⭐⭐⭐⭐Professional use⭐⭐⭐⭐⭐Fine decorative plating⭐⭐⭐⭐☆👉 Conclusion: Ideal for users who need efficient, fast, and high-quality gold plating.Application – Step by StepClean and degrease the surface→ essential for adhesionActivate the material→ use an appropriate activatorGold plating process→ apply electrolyte (bath, brush, or pad)Post-treatment→ rinse and finish💡 Pro Tip: Surface preparation determines up to 80% of the final coating quality.CompatibilityThis gold electrolyte can be used with:Galvanic systems (bath plating)Brush plating devicesPad plating systems👉 Also compatible with:Silver, palladium, or platinum pre-platingDifferent electrode types (platinum recommended)Practical ExamplesGold plating a ring within minutesFast coating of electrical contactsConsistent results in series productionFrequently Asked Questions (FAQ)Why use 8 g/L gold electrolyte?It enables faster deposition, thicker coatings, and professional results.Is it suitable for beginners?Yes, with proper preparation and basic knowledge, it is easy to use.How durable is the gold coating?With correct application, the coating is highly durable and wear-resistant.Which electrode is recommended?Platinum electrodes provide the most stable and high-quality results.Recommended AccessoriesPower supplies and rectifiersElectrodes (platinum or graphite)Cleaners and activatorsComplete galvanic systems👉 The right combination of equipment, electrolyte, and electrode ensures optimal results.Order Gold Electrolyte 8 g/L NowAchieve fast, brilliant, and professional gold plating results with a high-performance electrolyte.👉 Order now and start plating with precision and efficiency.