Metal Polish Ultra-Fine – The Perfect Pre-Treatment for Premium Surface Quality For applications demanding extremely high surface quality and brilliant shine: Metal Polish Ultra-Fine is the top choice for final pre-treatment before electroplating. Ultra-Fine Cleaning Power – Ideal for Sensitive Surfaces This finely tuned formulation gently yet effectively removes: the most delicate silicone and release agent residues ultra-thin wax layers micro-contaminants and particles light oxides and adhesion inhibitors The built-in cleaner delivers deep surface cleanliness – the optimal base for uniform, high-adhesion plating layers. Brilliant, Smooth, Flawless – Even on Sensitive Materials Used with a fine microfiber cloth, this ultra-fine polish will: restore mirror-like shine to chrome and metal bring conductive plastics to a glossy, refined finish refresh used components with an elevated appearance smooth fine details and delicate contours Sensitive parts are treated gently while achieving an exceptionally even finish. Key Benefits at a Glance Ultimate pre-treatment for bath, brush, and swab plating Removes the finest residues and prepares ideal adhesion surfaces Highest level of surface quality and brilliance Suitable for metals, chrome, and conductive plastics Easy and controlled application Designed for workshop, professional labs, and industrial environments Result: Technically pristine, high-gloss surfaces with optimal adhesion and a flawless professional finish.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Gold Flash 2 g/L – Gold Plating Electrolyte for Pen, Tank and Brush/Tampon PlatingVersatile gold electrolyte for decorative plating and galvanic intermediate layersGold Flash Electrolyte with 2 g/L gold is designed for thin decorative gold coatings, selective replating and a variety of electroplating applications. It is suitable for pen plating, tank plating and brush/tampon plating.In addition to decorative gold plating, Gold Flash can be used as a thin galvanic intermediate layer or adhesion layer for subsequent coatings, provided that the base material, surface pretreatment and subsequent plating process are compatible.Gold Flash may also be used as part of coordinated plating processes for producing different gold colours, including white gold, rose gold and green gold. The electrolytes and mixing ratios required for these applications must be appropriately matched.Key BenefitsGold plating electrolyte containing 2 g/L goldSuitable for pen plating, tank plating and brush/tampon platingDesigned for thin decorative gold coatings and replatingPotential use as a galvanic adhesion layer or intermediate layer for subsequent coatingsSuitable for compatible metal surfaces and multilayer plating systemsCan be incorporated into coordinated processes for different gold coloursGold content of the deposited layer: 99.9%, according to the product specificationsDeposition rate of approximately 0.12 µm/min at 5.0 V using a platinum electrodeSpecified current density: 0.1 A/cm²Deposit hardness: 180–190 HVStated shelf life: more than 3 yearsTechnical SpecificationsPropertySpecificationProduct nameGold Flash / GoldflashGold concentration2 g/LVoltage range4.0–6.0 VOperating temperature14–25 °CCurrent density0.1 A/cm²Electrode materialPlatinum or carbonGold content of deposit99.9%Deposition rateApprox. 0.12 µm/min at 5.0 V with a platinum electrodeDeposit hardness180–190 HVDeposit density19.3 g/cm³Internal stressLow to mediumStorageProtect from sunlightShelf lifeMore than 3 yearsPen Plating ApplicationsPen plating is suitable for selectively coating small areas, edges, individual component sections and repair spots. Using a suitable plating unit and pen electrode, specific areas can be plated without immersing the entire workpiece in a plating bath.The specified voltage range is 4.0–6.0 V. The appropriate setting depends on the equipment, electrode, surface condition and process parameters.Brush/Tampon Plating ApplicationsIn brush or tampon plating, the electrolyte is applied to the prepared workpiece using a suitable applicator saturated with electrolyte. This method allows selective plating of larger areas and is particularly useful for components that cannot be fully immersed in a plating bath.The specified deposition rate of approximately 0.12 µm/min was measured at 5.0 V using a platinum electrode on a sample area continuously covered by the applicator. Actual deposition rates may vary depending on the surface geometry, applicator movement and operating conditions.Tank Plating ApplicationsTank plating is suitable for coating compatible workpieces that can be fully or partially immersed in the electrolyte. It can be used for decorative finishes and selected applications in multilayer electroplating systems.For a uniform coating, appropriate surface preparation, electrode positioning and suitable process parameters are essential. The specified operating temperature is 14–25 °C.Gold Flash as an Adhesion Layer for Subsequent CoatingsGold Flash can be used as a thin galvanic intermediate layer to provide a suitable foundation for subsequent coating processes. Depending on the base material and the following plating process, the gold layer may serve as an adhesion layer between the workpiece and a subsequent electroplated coating.The electrolyte is intended for use on compatible metal surfaces. Adhesion depends on appropriate pretreatment, a clean and sufficiently activated surface, and correct coordination of the individual plating steps.Gold Flash can therefore form part of a multilayer electroplating process. Suitability must be evaluated for the specific base metal and subsequent coating.A Basis for Different Gold ColoursGold Flash may be incorporated into suitable plating processes to produce different gold colours, including:White gold: light, silvery-white gold finishesRose gold: warm, reddish-gold finishesGreen gold: greenish-yellow gold finishesThe final colour depends on the composition of the coating electrolytes and the plating process. Gold Flash may be used as part of a coordinated process for achieving the desired finish.Important: Different electrolytes must not be mixed directly without first verifying their chemical compatibility. Follow the relevant manufacturer specifications and validated formulations when producing specific gold colours.Thin Decorative Gold CoatingsGold Flash is designed for thin decorative gold deposits and selective replating. According to the product specifications, the deposited layer has a gold content of 99.9% and a hardness of 180–190 HV.The achievable coating thickness and final result depend on factors including plating time, power supply, electrode configuration, surface condition and the selected plating method.The specified current density is 0.1 A/cm². In practical applications, the appropriate current density may depend on the particular process and plating method.Electrodes and Process NotesPlatinum or carbon electrodes are specified for this electrolyte. The use of stainless-steel anodes is expressly discouraged for most plating processes.The stated deposition rate refers to a sample area continuously covered by the plating applicator. This reference value should not automatically be applied to every workpiece geometry or plating method.Storage and Shelf LifeProtect Gold Flash Electrolyte from sunlight during storage. The stated shelf life is more than 3 years.Gold Flash from Betzmann GalvanikGold Flash Electrolyte 2 g/L offers versatile applications in electroplating and surface finishing. It is suitable for pen plating, tank plating and brush/tampon plating. In addition to decorative gold finishes, it can be incorporated into coordinated multilayer plating systems, including potential intermediate layers and processes for achieving different gold colours.Betzmann Galvanik – Electroplating products and solutions for high-quality surface finishing.

Metal Polish Ultra – The Perfect Pre-Treatment for Premium Plating Quality For electroplating professionals and anyone who demands the highest surface quality: Metal Polish Ultra delivers industry-leading cleaning power and surface preparation for the best plating results. Ultimate Cleaning Power – Ideal Adhesion and Surface Prep This advanced formulation reliably removes: even very stubborn silicone and release agent residues embedded wax and polishing compounds fine contaminants and particulates unwanted metal films and oxidation products The built-in cleaner ensures deep-cleaned surfaces that form the ideal base for uniform, high-adhesion plating layers. Restore and Enhance Surface Brilliance Whether for restoration, repair, or high-end surface finishing, this premium polish combined with a fine microfiber cloth delivers: brilliant shine on chrome surfaces smooth, reflective results on conductive plastics effective removal of accidental coatings (e.g., gold) Challenging substrates are treated gently while still achieving a radiant finish. Key Benefits at a Glance Perfect pre-treatment for bath, brush, and swab plating Removes stubborn residues and embedded soils Improves adhesion and coating quality Suitable for metals, chrome, and conductive plastics Easy and controlled application Designed for workshop, professional labs, and industrial use Result: Technically pristine surfaces, enhanced coating performance, and an exceptional finish every time.

The metal care product is used for cleaning and polishing surfaces.    With the metal care almost all types of surfaces (except textiles) can be cleaned, treated and sealed with little effort and completely without water! Metal Care from Betzmann Galvanik does not contain acids or alkalis. It is ph-neutral and slowly biodegradable. It is even machine applicable by means of an eccentric polishing machine.      Some examples of use:  Car, boat, motorcycle, bicycle, kitchen, bathroom, ceramics, glass, leather, imitation leather, amarture board, plastic, camper, stainless steel, chrome, glass panes, TV, monitors, glasses, helmets, tiles, mirrors, shoe sole sides,  cell phone displays, store counters, high-gloss fronts, foiling (matt/glossy), advertising and company signs, solar systems, solariums, whirlpools, pools, rims, ovens, acrylic glass, ceramic hobs, CNC machines, chrome fixtures in the bathroom and much more.      Application:  Shake bottle briefly before use. Apply the metal care to the object to be treated and distribute/massage.  Then polish or wipe the lotion away with a clean microfiber cloth.  It can be applied by hand or by machine. For machine application, the care product can be used like a normal polish. For this purpose, apply the agent to the machine polishing attachment and process with gentle pressure. Then polish or wipe off the lotion with a clean microfiber cloth. or wipe clean. Due to its additional cleaning function, the metal care replaces a large number of polishes for automotive reconditioners. Smooth surfaces appear  after the application in their original shine and are sealed (Lotus effect). Dull lacquers are beautifully matt again after application and dirt and grease residues are grease residues are removed. Glass panes become streak-free clean after application and less susceptible to soiling (sealed).  With each new or further application, the protective film/sealing is further built up and the pores in the surface are closed. The product does not contain chalk or wax ingredients like common polishes. Thus also plastics can be polished effortlessly and appear again in the old shine (no white stripes or residues on plastic). The sealing usually lasts between 2-8 weeks (depending on the area of application and stress on the polished object). object).    Notice:  The product should not necessarily be used in the blazing sun, otherwise it may happen that you have to work harder to polish up the product One should also not use the metal care on smooth floors, as this surface then becomes even smoother and possible slipping danger exists.  

Gold Electrolyte 4 g/L – Gold Plating Solution for Electroplating and Compatible Brush Plating SystemsProduct DescriptionThis gold electrolyte contains 4 g/L of gold and is designed for the electroplating of suitable workpieces. It enables the deposition of a high-quality gold coating and, subject to compatibility with the relevant equipment, may be suitable for both conventional tank plating and appropriate brush plating or pen plating applications.The electrolyte is intended for users who wish to apply a gold coating to suitable metal surfaces. The achievable coating quality and deposition rate depend on the operating conditions, workpiece preparation and plating method used.Important: This product contains potassium cyanide. Before use, read the current Safety Data Sheet (SDS) carefully and follow all applicable safety and handling requirements.Benefits and FeaturesGold electrolyte containing 4 g/L goldDesigned for suitable electroplating applicationsMay be used with compatible brush plating systems, subject to confirmation of suitabilityDeposited coating specified as 99.9% goldDefined operating parameters for controlled applicationTechnical data covering deposition rate, coating thickness and bath maintenanceGold replenishment possible using a suitable gold replenisherIntended for professional and knowledgeable users with appropriate technical equipmentTechnical DataPropertySpecificationProduct typeGold electrolyteGold concentration4 g/LRecommended temperature range18–40 °CRecommended pH range4.3–4.5Reference current density0.01 A/cm²Recommended current density range0.008–0.012 A/cm²Reference deposition rate0.15 µm/minReference conditions20 °C and low agitationSpecified maximum coating thickness4 µmGold content of deposited coating99.9%Specified coating hardness190–210 HVDensity of deposited gold19.3 g/cm³Cathode efficiencyApprox. 25% at 0.01 A/cm²Internal stressMediumRecommended maximum bath lifeApprox. 5–6 gold turnoversShelf life1 yearStorageProtect from direct sunlightHazard informationContains 0.15% potassium cyanideTransportAccording to the available information, not classified as dangerous goods for transport; verify against the current SDSThe deposition data refer to the stated reference conditions. Actual results may vary depending on the workpiece, pretreatment, current distribution, temperature, agitation and plating method.Operating Parameters for Tank PlatingCurrent DensityThe specified reference current density is 0.01 A/cm², with a recommended range of 0.008–0.012 A/cm².The appropriate current density depends on the geometry of the workpiece, its effective surface area and the conditions within the bath. Unsuitable or excessive operating values may adversely affect the quality of the gold coating.TemperatureThe specified operating temperature range is 18–40 °C. The reference deposition rate is based on a temperature of 20 °C with low agitation.Temperature affects the deposition rate and the behaviour of the electrolyte. For reproducible results, operating conditions should be kept as consistent as possible.pH ValueThe specified pH range is 4.3–4.5. The pH should be maintained within the intended operating range. Any adjustment must follow a procedure specifically approved for this product.Deposition Rate and Coating ThicknessAt a current density of 0.01 A/cm², a temperature of 20 °C and low agitation, the specified deposition rate is approximately 0.15 µm/min.The specified maximum coating thickness is 4 µm. The actual achievable thickness depends on the operating conditions and the condition of the electrolyte.Important: These reference values do not automatically apply to brush plating. With pen plating, the actual current density and coating results must be assessed under the specific application conditions.Application in Brush Plating and Pen PlatingIn brush plating, electrolyte is transferred to the surface being coated using a suitable electrode and an electrolyte-saturated tampon or applicator. This method is particularly useful for localised gold plating and repair work where the entire workpiece cannot or should not be immersed in a plating bath.Use of this electrolyte in a brush plating system is conditional on its suitability for the specific equipment and operating method being confirmed.Required EquipmentSuitable brush plating or pen plating systemGraphite or platinum electrode compatible with the electrolyteAppropriate tampon or electrode coveringGold electrolyte containing 4 g/L goldSuitable DC power supplyPersonal protective equipment as specified in the Safety Data SheetApplication Instructions1. Prepare the workpieceThoroughly clean and degrease the surface. Depending on the base material and coating system, suitable activation may be necessary. The preparation procedure must be appropriate for the substrate and the plating process.2. Prepare the electrode and tamponUse a graphite or platinum electrode only if it is compatible with the electrolyte and the equipment. Wet the appropriate tampon with the electrolyte in accordance with the equipment manufacturer's instructions. The tampon must remain sufficiently moist during application without dripping uncontrollably.3. Check the electrical connectionsIn conventional electroplating, the workpiece is normally connected as the cathode to the negative terminal, while the suitable working electrode is connected to the positive terminal. The correct configuration must be confirmed against the operating instructions for the specific equipment and its approval for this electrolyte.4. Set the voltageA voltage starting at 4 V may be considered only if it is approved for the particular brush plating system and this electrolyte. Voltage is not a universal operating setpoint. The actual current and current density depend, among other factors, on the contact area, pressure, tampon wetting and electrical resistance.5. Apply the gold coatingMove the wetted tampon evenly across the prepared surface. Maintain consistent movement, adequate wetting and stable electrical contact. Do not allow the tampon to dry out. Determine the appropriate operating values in accordance with the equipment manufacturer's instructions and the requirements of the specific application.6. Inspect the resultCheck the coating for uniformity and adhesion. The achievable coating thickness and deposition rate may differ from those obtained with conventional tank plating.Important Notes on Brush PlatingThe reference deposition rate of 0.15 µm/min at 0.01 A/cm² must not be transferred directly to brush plating without verification. The stated maximum coating thickness and coating quality must also be assessed under the actual application conditions.Graphite and platinum electrodes may only be used if they are compatible with the electrolyte and the system being used.Gold Replenishment and Bath MaintenanceDuring electroplating, gold is deposited from the electrolyte. As the bath is used, the available gold concentration decreases. A suitable gold replenisher specified to contain 16 g/L gold is intended for replenishing the gold consumed.The required replenishment depends on the actual gold consumption, bath volume and condition of the electrolyte. The following figures illustrate the calculation of gold turnovers and theoretical gold consumption.Calculating Gold TurnoversOne litre of fresh electrolyte containing 4 g/L gold initially contains 4 g of gold.Gold turnoversTheoretical gold consumptionGold replenisher containing 16 g/L1 turnover4 g gold250 ml5 turnovers20 g gold1,250 ml6 turnovers24 g gold1,500 mlThe table refers to one litre of starting electrolyte and the calculated replenishment volume required to replace the corresponding amount of gold. It does not replace an assessment of the actual bath concentration or condition. Replenishment must be based on an appropriate calculation and take the liquid volume into account.The recommended maximum bath life is approximately 5–6 gold turnovers. This is a guideline, not a guarantee that the bath will maintain consistent performance throughout this period.Evaporation and Liquid LossesEvaporation can affect the liquid level and concentration of the bath. According to the available product information, evaporation losses should be compensated for at the end of the working day using deionised water, restoring the original liquid level.Not all liquid losses are caused by evaporation. If electrolyte is carried out of the bath on workpieces, tampons or equipment, both liquid and dissolved gold are lost. These losses must be taken into account when maintaining the bath.Minimising Gold Losses Through Drag-OutDuring tank plating, allow coated workpieces to drain above the bath so that adhering gold-bearing electrolyte can return to the bath. This helps reduce gold losses caused by drag-out.With brush plating, controlled wetting and careful handling of the electrolyte are also important. Spilled or contaminated solution must not be returned to the bath indiscriminately.Crystallisation in a Nearly Exhausted BathAccording to the available information, potassium salts may crystallise when the bath is nearing exhaustion. Crystallisation indicates that the condition of the bath should be checked.Do not simply add water or replenisher and continue working. Determine the cause in accordance with the product-specific instructions and the Safety Data Sheet.Deposited Gold CoatingThe following values are specified for the deposited gold coating:Gold content: 99.9%Hardness: 190–210 HVDensity: 19.3 g/cm³Internal stress: MediumThe actual coating quality depends on workpiece preparation, current conditions, electrolyte condition and operating parameters.Storage and Shelf LifeSpecified shelf life: 1 yearProtect from direct sunlightKeep the container closed in accordance with the manufacturer's instructionsFollow the Safety Data Sheet and product labellingPrevent access by unauthorised personsSafety InformationThis product contains 0.15% potassium cyanide and requires knowledgeable and safe handling.Read the current Safety Data Sheet in full before use.Ensure suitable personal protective equipment and an appropriate workplace are available.Avoid contact with skin and eyes and do not swallow the product.Ensure suitable ventilation and safe handling procedures.Never mix with acids, acidic cleaners or other incompatible chemicals. Contact between cyanide-containing solutions and acids can release highly toxic hydrogen cyanide gas.Do not allow the electrolyte, rinsing water or residues to enter drains. Dispose of them only in accordance with applicable regulations.Store only in suitable, clearly labelled and securely closed containers.The final hazard classification and all mandatory protective measures must be based on the current Safety Data Sheet for the specific product. The absence of a dangerous-goods transport classification does not mean that the product is harmless.Transport InformationAccording to the available product information, the electrolyte is not classified as dangerous goods for transport. This statement must be verified against the current Safety Data Sheet and the applicable transport regulations before publication.Frequently Asked QuestionsHow much gold does the electrolyte contain?The electrolyte contains 4 g of gold per litre.Can this electrolyte be used for brush plating?It may be suitable for compatible brush plating systems, provided that compatibility of the electrolyte, electrode and operating conditions has been confirmed.Which electrode can be used for brush plating?A suitable graphite or platinum electrode may be considered if it is approved for the electrolyte and the equipment being used.Can I use 4 V for brush plating?A voltage starting at 4 V may be appropriate for certain devices and applications. However, it is not a universal setpoint. The equipment's permitted operating values and the actual current density are decisive.How quickly does the electrolyte deposit gold?For tank plating, the specified rate is approximately 0.15 µm/min at 0.01 A/cm², 20 °C and low agitation. This value cannot be transferred directly to brush plating.How is gold replenished?A suitable gold replenisher containing 16 g/L gold is intended for replenishment. The required quantity depends on gold consumption and the condition of the bath.Is the electrolyte safe if it is not classified as dangerous goods for transport?No. The product contains potassium cyanide and requires the protective measures specified in the Safety Data Sheet. Transport classification does not determine the product's health hazards.Gold Electrolyte for ElectroplatingThis gold electrolyte containing 4 g/L gold offers defined technical specifications for suitable gold plating applications. Follow the operating parameters, bath maintenance instructions and special safety requirements associated with cyanide-containing electrolytes.Before using the electrolyte in a brush plating system, verify compatibility and the permitted operating conditions.

Flat Platinum Electrode (BMG‑032‑PL) Short Description The Flat Platinum Electrode (BMG‑032‑PL) is a wide, platinum‑coated electrode on a titanium base, designed for electroplating applications where large, relatively flat surfaces need fast, even coverage. It is especially effective when a standard cylindrical electrode is too small.  Product Description This electrode features a flat platinum‑coated surface on titanium, with an active plating area of approximately 4 × 4 cm. The platinum finish provides excellent chemical resistance, high conductivity and long service life in electroplating baths. Because of its broad active area, it enables faster and more uniform plating on larger flat surfaces compared to smaller round electrodes.  Compared to graphite or stainless steel electrodes, the platinum surface minimizes unwanted contamination and delivers cleaner, higher‑quality deposits, making it ideal for demanding plating tasks.  Typical Applications Electroplating large, flat surfaces such as signs, rims, plates or panels Selective plating by masking surrounding areas Workshop, laboratory or commercial plating tasks that require uniform coverage Combined use with pads or swabs for broader contact plating  Key Benefits Large active area: ensures even current distribution for broad coverage Platinum coating: chemically stable and ideal for clean, high‑quality deposits Faster deposition: reduces plating time compared to smaller electrodes Consistent results: uniform layers and reproducible outcomes Flexible compatibility: suitable for gold and other precious metal electrolytes  Usage Instructions Preparation: Thoroughly clean and degrease the workpiece; activate surface if needed. Placement: Position the flat platinum electrode in the electrolyte to cover the target area. Plating: Connect to the power supply and maintain voltage within the recommended range for even coverage. Masking: Mask adjacent areas when plating only specific regions. Aftercare: Rinse with clean water and dry after the process; optional polishing enhances finish. Conclusion The Flat Platinum Electrode (BMG‑032‑PL) is an effective, professional‑grade solution for consistent, high‑quality plating of broad surfaces. Its combination of a large active area and platinum’s chemical stability makes it a reliable choice for hobbyists, workshops, and professional electroplating operations.

Gelling Agent / Thickener – Additive for Drip-Free Electroplating Solutions and Precise CoatingsGelling Agent for Electrolytes – Greater Control for Pen Plating, Tampon Plating and Tank PlatingThe Gelling Agent / Thickener from Betzmann Galvanik is a specially developed additive for increasing the viscosity of electroplating electrolytes. By adding the thickener, low-viscosity electrolytes are transformed into a gel-like, low-drip consistency. This allows the electrolyte to remain on the workpiece surface for longer, making it easier to achieve precise and controlled plating results.It is particularly suitable for pen plating, tampon plating, and plating on vertical, inclined or complex-shaped surfaces, where it prevents the electrolyte from running off and significantly reduces solution loss. It is also ideal for selective plating, repair work and localized metal deposition.Your Advantages at a GlanceIncreases the viscosity of electroplating electrolytesConverts liquid electrolytes into a gel-like consistencyPrevents dripping and running on vertical surfacesReduces electrolyte consumptionEnables more precise pen plating and tampon platingImproves coating uniformityIdeal for repair plating and selective platingEasy to mix and useCompatible with many electroplating electrolytesWhy Use a Gelling Agent?Most electroplating electrolytes have a relatively low viscosity. On vertical or inclined workpieces, the electrolyte quickly runs off, which can result in:Uneven coating thicknessElectrolyte lossDrip marksPoor coating definitionIncreased electrolyte consumptionThe gelling agent keeps the electrolyte exactly where it is needed, making the plating process easier while improving coating quality and efficiency.Typical ApplicationsThe gelling agent is ideal for:Pen platingTampon platingSelective electroplatingLocal gold platingRepair gold platingVertical surface platingComplex workpiece geometriesJewellery manufacturingRestoration workModel makingPrecision engineeringApplicationSlowly add the gelling agent to the electrolyte while stirring until the desired consistency is achieved.Recommended mixing ratio:Approximately 1 part gelling agent to 10 parts electrolyteThe exact ratio may be adjusted depending on the electrolyte and the desired gel consistency.After mixing, a homogeneous gel structure should be obtained before use.Suitable ElectrolytesThe gelling agent can be used with many electroplating electrolytes, including:Gold electrolytesSilver electrolytesNickel electrolytesCopper electrolytesRhodium electrolytesMany other compatible electroplating solutionsFor new electrolyte systems, we recommend testing compatibility before large-scale use.Technical InformationProduct Type:Gelling Agent / ThickenerApplication:Increasing the viscosity of electroplating electrolytesRecommended Mixing Ratio:Approx. 1 : 10 (Gelling Agent : Electrolyte)Consistency:Adjustable from slightly thickened to highly gel-likeApplication Temperature:Room temperatureStorage:Store tightly closed in a cool and dry place.Practical Tips✔ Add the gelling agent slowly while stirring.✔ Adjust the mixing ratio gradually until the desired consistency is reached.✔ Allow the mixture to stand briefly before use so trapped air bubbles can escape.✔ Perfect for vertical surfaces and localized plating.✔ Especially recommended for gold, silver and rhodium plating applications.Safety InformationWear suitable protective gloves and safety glasses.Avoid contact with skin and eyes.Follow the Safety Data Sheet (SDS).Use only in well-ventilated areas.Keep out of reach of children.Quality from Betzmann GalvanikThe Gelling Agent / Thickener is the ideal additive for professional electroplating applications. It improves process control, reduces electrolyte consumption and enables clean, uniform and precise metal coatings, especially on demanding workpieces and during selective plating.SEO for Shopware 6Product TitleGelling Agent / Thickener – Additive for Electroplating Electrolytes and Drip-Free PlatingSEO URLgelling-agent-thickener-electroplating-electrolyteSEO TitleGelling Agent Thickener | Additive for Electroplating Electrolytes | Betzmann GalvanikMeta DescriptionProfessional gelling agent and thickener for electroplating electrolytes. Increases viscosity, prevents dripping and improves control during pen plating, tampon plating and tank plating. Suitable for gold, silver, nickel and copper electrolytes.Keywordsgelling agent, electrolyte thickener, electroplating thickener, electroplating additive, plating gel, electrolyte additive, pen plating gel, tampon plating additive, gold electrolyte thickener, silver electrolyte thickener, nickel electrolyte additive, copper electrolyte thickener, electroplating accessories, Betzmann GalvanikLong-Tail Keywordsgelling agent for electroplating electrolytes, thickener for gold plating electrolyte, pen plating gel additive, tampon plating electrolyte thickener, prevent electrolyte dripping during plating, electroplating viscosity additive, professional electroplating thickener