Rosegold Solution 18 Karat
€60.50*
Content:
0.05 Liter
(€1,210.00* / 1 Liter)
(€50.84 ohne MwSt.)
Available, delivery time: 1-2 days
Product number:
BMG-118A
PDF offer
Create PDF offer for this product
Tip: Add multiple products to the cart and create the offer there. Logged in users get an individualized offer.
Product information "Rosegold Solution 18 Karat"
Rosegold Solution from Betzmann Galvanik
This Rose Gold Brush/Pen Plating Solution (18 Karat) doesn’t have to be mixed beforehand. It can be used for both brush and pen plating. You can use either the Platinum Electrode (2.5 – 3.0 volts) or the Carbon Electrode (2.0 – 2.5 volts) with this solution.
One of the outstanding qualities of the solution is that it plates very fast compared to other brush plating solutions.
You can compare the plating rates using our online brush plating calculator on the links bar above.
Failure to observe the above precautions will result in the degeneration of the gold component in the solution. This will cause copper-rich plating, which will tarnish quickly.
Please see below for more products related to Rose Gold Brush/Pen Plating Solution (18 Karat).
Recommended electrode: Carbon, Voltage: 3 – 3.5
Gold Concentration | 9.1g/l |
Voltage Range (Platinum Electrode) | 2.5 – 3.0 volts* |
Voltage Range (Carbon Electrode) | 2.0 – 2.5 volts* |
Electrode | Carbon |
Alloy consistency (at mix ratio 1Mixer:10 K-Gold) | 75% Gold, 25% Copper |
Colour designation | 5N |
Temperature | 20 – 25 °C |
Plating Rate at (3.3 volts, carbon electrode) | Approx. 0.5 microns per minute (max) |
Hardness | Hard: In excess of 250 – 300 Hv |
Density of deposit | 14.4 g/cm3 |
Stress | Medium |
Special storage requirements | Away from sunlight |
Shelf life | 1-2 years (please refer to notes below) |
Health and Safety classification | Irritant |
Special considerations | None (cyanide-free) |
Transport (UN number) | None: Not classified as dangerous for transport |
* The lower voltage range should be applied when using smaller swabs.
Notes:
- Remove any existing layers of rose gold before plating.
- Store in hermetically sealed container with lid firmly closed. Small
- volumes for day-day use should be stored in a stoppered syringe.
- Higher voltages can be used with plating rates in excess of 3 microns
per minute (spot).
A lower voltage range is recommended when plating above 1 micron to prevent
dullness and subsequent polishing.
Login