Silver Electrode

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Thick Multi-Layer Anode Pad – Maximum Durability for Demanding Electroplating The thick multi-layer anode pad is a highly durable and robust tampon (anode sleeve) designed for professional use in pen plating and brush (tampon) plating applications. Its reinforced multi-layer construction provides significantly longer service life compared to standard pads while ensuring consistent and uniform electrolyte transfer during the plating process. This makes it the ideal solution for demanding applications, rough surfaces, and intensive use conditions. Key Benefits Multi-layer construction for maximum durability Ideal for rough, uneven, or structured surfaces Significantly reduced wear compared to soft pads Uniform electrolyte distribution for consistent coatings Compatible with a wide range of plating solutions Cost-efficient due to extended lifespan Applications Pen plating (localized electroplating) Brush / tampon plating Repair and touch-up work Technical and functional coatings Processing of rough or heavily used surfaces This anode pad is the preferred choice when standard pads wear out quickly or fail to provide consistent results. Technical Specifications Design: thick, multi-layer stitched construction Structure: reinforced fabric layers for high stability Absorption: high electrolyte retention capacity Use: universal for electroplating applications Scope of delivery: 1 piece Compatibility Suitable for anode rods up to approx. 6 mm diameter Expandable up to approx. 8 mm if adjusted Dual insertion openings for extended usability Compatible with: Graphite anodes Platinum anodes Standard plating pens Process Advantages Even electrolyte and current distribution Reduced streaking and uneven coatings Better control on difficult surfaces Longer operating time → fewer replacements Increased efficiency in demanding applications Function in the Plating Process The anode pad acts as an electrolyte carrier and contact medium between the anode and the workpiece. It directly affects: Coating uniformity Surface quality Process stability A high-quality multi-layer pad ensures consistent, professional results even under heavy use. Application Note Pre-soak thoroughly with electrolyte before use to ensure conductivity Inspect regularly and replace when worn Conclusion – The Professional Choice for Heavy-Duty Applications The thick multi-layer anode pad is the ideal solution for professionals working under demanding electroplating conditions. It delivers: Maximum durability Reliable coating quality Improved process efficiency A small component with a major impact on plating performance and consistency.

Silver High-Speed Electrolyte BMG‑105.6 High-performance silver plating solution – 75 g of silver per liter for fast, high-quality coatings Short Description The Silver High-Speed Electrolyte BMG‑105.6 is a high-performance electroplating solution designed for the rapid deposition of high-quality silver layers. With a silver content of 75 g/L, this electrolyte enables a significantly higher deposition rate than standard silver baths, producing bright, reflective, and conductive silver coatings in less time. The layers are ideal for both decorative and functional applications. Applications This high-speed silver electrolyte is typically used for: Decorative silver plating, e.g., jewelry, accessories, and design objects Functional coatings with improved electrical and thermal conductivity High-throughput applications on large surfaces Tank, brush, and pen/peg plating, depending on equipment Multi-layer plating systems (e.g., copper → silver → gold) The higher silver concentration accelerates deposition while maintaining consistent quality. How High-Speed Silver Plating Works (Simple Explanation) Silver plating is an electrolytic process, where silver ions are reduced under direct current and deposited onto a prepared metal surface: Surface Preparation: Thoroughly clean and degrease the workpiece to remove oils and contaminants. Activation: Activate the surface chemically if needed for optimal adhesion. Electroplating: Apply direct current; silver ions migrate and form a bright silver layer on the surface. Finishing: Rinse and dry – the surface remains reflective and uniform. The high silver content allows fast and efficient deposition without compromising appearance or conductivity. Benefits of Silver High-Speed Electrolyte BMG‑105.6 High silver content (75 g/L) for faster deposition and higher productivity Bright, reflective silver surface Enhanced electrical and thermal conductivity Suitable for decorative and functional coatings Compatible with tank, brush, and pen/peg plating Robust and uniform layers even at high throughput Technical Parameters PropertyValue / RangeElectrolyte typeSilver High-Speed plating solutionSilver contentapprox. 75 g/LpHslightly acidic to neutral, optimized for high deposition ratesOperating temperature15–30 °CVoltage (tank plating)1.5–4.0 VVoltage (brush/pen plating)3–7 VCurrent density0.5–4 A/dm²Anode materialGraphite or pure silverTypical layer thickness2–10 µmSurface appearanceHigh-gloss, reflectiveLayer purity>99.9 % silverConductivityVery goodShelf life1–2 years Note: Values serve as practical guidelines; results may vary slightly depending on equipment, workpiece, and process conditions. Practical Application Tips Surface Preparation: Remove grease, oils, and contaminants by thorough cleaning and degreasing. Chemical activation may be performed to improve adhesion. High-Speed Silver Plating: Operate the electrolyte at recommended temperature, voltage, and current density. Ensure even agitation or movement for uniform layer formation. Mask areas if selective plating is needed. Post-treatment: Rinse with clean water and dry after plating. Light polishing can enhance gloss if desired. Safety Information Silver plating solutions contain chemical components and must be handled safely: Wear gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work only in well-ventilated areas Do not ingest; keep out of reach of children Dispose of waste according to local regulations Silver salts and electrolytes can be irritating; proper protection is essential. Conclusion The Silver High-Speed Electrolyte BMG‑105.6 is a powerful and efficient plating solution that produces bright, reflective, and conductive silver layers at high speed. Its high silver content and ease of use ensure fast throughput with excellent layer quality. Ideal for jewelry, technical components, or large-surface applications, this electrolyte delivers consistent, high-quality results for hobbyists, workshops, and professional plating facilities.

Product Information "Screw Jar 250 ml Transparent"250 ml plastic screw jar made of transparent polypropylene (PP) with a standard white screw cap made of polyethylene (PE).The transparent plastic jar is particularly suitable for storing ointments, pastes, powders, or free-flowing substances.250 ml Plastic Jar / Transparent Screw JarSpecificationDetailsNominal volume                                       250 mlDiameter                                        80 mmHeight incl. lid                                        58 mmMaximum label height                                        36 mmJar material                                        PolypropyleneLid material                                        PolyethyleneAppearance                                        TransparentClosure                                         Standard whiteApplication                                         Ointments, creams, powders, free-flowing substancesOther names                                         Plastic jar, screw jar, universal jar

Silver Electrolyte 30 g/L – Premium Silver Plating Solution for Tank, Pen & Brush PlatingProfessional Silver Electrolyte for Bright, Conductive and High-Quality Silver CoatingsThe Silver Electrolyte 30 g/L from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for depositing high-purity silver coatings on conductive metal surfaces. With a silver concentration of 30 grams per litre, this electrolyte provides fast deposition rates, brilliant finishes and outstanding electrical conductivity.The electrolyte is suitable for tank plating, pen plating and brush plating (swab plating), delivering professional results for both decorative and technical applications. Whether you are plating jewellery, electronic components, electrical contacts, cutlery or restoration projects, this silver plating solution produces uniform, highly adherent and durable silver deposits.Your Advantages at a Glance30 g of silver per litreReady-to-use professional electrolyteSuitable for tank plating, pen plating and brush platingBright, uniform silver depositsOutstanding electrical and thermal conductivityExcellent adhesionEven metal depositionSuitable for decorative and technical applicationsIdeal for hobbyists, workshops and industrial usersPremium quality from Betzmann GalvanikWhy Electroplate with Silver?Silver offers the highest electrical conductivity of all metals, combined with excellent thermal conductivity and an attractive bright white appearance. It is one of the most widely used precious metals in electroplating for both decorative and functional applications.Silver plating is commonly used for:Decorative finishesElectrical contactsPrinted circuit boards (PCBs)Connectors and terminalsJewelleryWatchesCutleryMusical instrumentsPrecision componentsRestoration workIn addition to its elegant appearance, a silver coating significantly improves conductivity while providing excellent wear resistance and protection against oxidation.Suitable Base MaterialsThe Silver Electrolyte is suitable for plating:CopperBrassBronzeNickelSteel (with appropriate pre-treatment)Stainless steel (after Nickel Strike activation)SilverCopper-plated componentsDepending on the substrate, we recommend using the appropriate activator or intermediate layer to achieve maximum adhesion.Recommended Plating StructureFor maximum durability and long-term colour stability, the following plating sequence is recommended:Base Material → Copper → Nickel → SilverThe nickel layer acts as a diffusion barrier, preventing copper migration into the silver coating and ensuring a bright, tarnish-resistant finish.Typical ApplicationsIdeal for:Jewellery manufacturingJewellery repairWatchmakingElectronicsPrinted circuit boards (PCBs)Electrical contactsConnectorsMusical instrumentsRestorationClassic carsModel makingLaboratoriesIndustrial electroplatingProfessional metal finishingApplicationBefore silver plating:Thoroughly clean and degrease the workpiece.Remove all oxide layers.Activate the surface according to the base material.During plating:For tank plating, immerse the workpiece completely in the electrolyte.For pen plating or brush plating, keep the electrode moving continuously across the surface to ensure uniform metal deposition.After plating, rinse the workpiece thoroughly with clean water and dry completely.Technical SpecificationsSilver concentration: 30 g/LOperating temperature: 15–30 °CpH value: Slightly acidic to neutralCurrent density: 0.5–3 A/dm²Tank plating voltage: Approx. 1.5–3.5 VPen & brush plating voltage: Approx. 3–7 VRecommended anodes: Platinum, graphite or silverCoating thickness: Approx. 1–5 µm (depending on plating time)Deposit purity: >99.9% silverThe above parameters are recommended values and may vary depending on workpiece geometry, electrode spacing and plating equipment.Safety InformationWear protective gloves and safety goggles.Avoid skin and eye contact.Use only in well-ventilated areas.Keep out of reach of children.Always follow the Safety Data Sheet (SDS).Quality from Betzmann GalvanikThe Silver Electrolyte 30 g/L from Betzmann Galvanik has been developed to meet the highest standards in modern electroplating. Its high silver concentration, excellent conductivity and easy handling make it ideal for decorative silver plating as well as demanding industrial applications. Combined with Betzmann Galvanik power supplies, electrodes and accessories, it delivers brilliant, durable and professional silver finishes every time.