Galvano Activator BMG-061.2 Surface activator and pickling solution for electroplating applications Short Description The Galvano Activator BMG-061.2 is a specially formulated chemical solution used for activating metal surfaces prior to electroplating. It removes thin oxide and passive layers that prevent proper adhesion of electroplated coatings and restores a chemically active metal surface. The activator is an essential preparation step for achieving uniform, adherent and high-quality electroplated layers, such as nickel, gold, silver or chromium coatings. What is the activator used for? The activator is used to: remove thin oxide and passive layers from metal surfaces activate metals after degreasing and before electroplating improve adhesion and durability of subsequent coatings prepare workpieces for professional electroplating processes It is commonly applied to: steel and passive nickel surfaces copper, brass and copper alloys preparation before nickel plating, silver plating, gold plating or chromium plating How does the activator work? (simple explanation) Even after thorough cleaning and degreasing, metal surfaces often remain covered by microscopic oxide layers that are invisible to the eye but block electroplating. The activator works by: Dissolving and removing thin oxide and passive layers Chemically activating the metal surface Allowing the next electroplated layer to adhere evenly and securely This results in better coating quality, improved adhesion and longer service life of the plated surface. Application Instructions (practical guidance) Preparation Before using the activator, the workpiece should be polished if required and thoroughly degreased, e.g. with a suitable electrocleaner. Application Method 1 – Without electrical current (immersion) Immerse the workpiece in the activator for 30–60 seconds Rinse briefly with clean water Proceed with electroplating within 10–30 minutes to prevent re-oxidation Application Method 2 – With electrical assistance (brush / pen activation) Use a stainless steel or graphite electrode Apply approx. 2.7 V DC Treat the surface with gentle circular movements for about 30 seconds Tip: Begin electroplating as soon as possible after activation, as metal surfaces oxidize quickly when exposed to air. Advantages of Galvano Activator BMG-061.2 Effectively removes invisible oxide and passive layers Ensures optimal surface activation before electroplating Improves adhesion and uniformity of plated coatings Suitable for various metals and alloys Can be used with or without electrical current Proven product for hobby, workshop and professional use Safety Information The activator is a chemical solution and must be handled with appropriate care: Wear chemical-resistant gloves, safety goggles and protective clothing Avoid contact with skin and eyes In case of contact, rinse immediately with plenty of water Use only in well-ventilated areas Keep out of reach of children Warning: May cause serious eye irritation. Proper protective equipment is mandatory. Scope of Delivery Galvano Activator BMG-061.2 Quantity according to selection Conclusion The Galvano Activator BMG-061.2 is an essential preparation product for professional electroplating. By removing oxide layers and activating metal surfaces, it ensures reliable adhesion, uniform coatings and consistently high-quality electroplated results — for both beginners and professionals.

Electrocleaner – Degreaser (SW10002.5) Universal cleaner and degreasing agent for electroplating surface preparation Short Description The Electrocleaner – Degreaser is a powerful cleaning and degreasing solution designed for the preparation of metal surfaces prior to electroplating and other coating processes. It reliably removes grease, oil, residues, fingerprints and light oxide layers without attacking paints or lacquers. Proper surface preparation is one of the most critical steps in electroplating. This electrocleaner ensures clean, active metal surfaces and significantly improves coating adhesion, uniformity and final appearance. What is the electrocleaner used for? The electrocleaner is used to thoroughly clean and degrease metal surfaces before electroplating, activation or coating processes. It is suitable for removing: grease, oil and lubricants fingerprints and skin oils light oxide and tarnish layers general surface contamination The product can be used on all conductive metals, including silver, copper, brass, steel and many other alloys. How does the electrocleaner work? (simple explanation) The electrocleaner dissolves grease, oil and surface contamination using a specially formulated chemical composition. This exposes a clean, bare metal surface, which is essential for successful electroplating. There are three common application methods: 1. Non-electrolytic (manual cleaning) The workpiece is wiped or brushed with a cloth or sponge soaked in the electrocleaner. 2. Hot degreasing The solution can be heated to approximately 50 °C, which significantly improves cleaning performance for heavy contamination. 3. Electrolytic cleaning By applying direct current (approx. 5 V) between the workpiece and a suitable electrode (e.g. stainless steel or graphite), the cleaning effect is enhanced and oxide layers are reduced more efficiently. Advantages of the Electrocleaner – Degreaser Universal application for many metals Effectively removes oil, grease, dirt and oxides Gentle on paints and lacquers – does not attack coatings Ideal surface preparation for electroplating processes Suitable for hobby use, workshops and professional applications Can be used with or without electrical current Application Notes (practical guidance) Manual cleaning: Rub the surface thoroughly with a sponge or cloth soaked in the electrocleaner. Hot cleaning: Heat the solution to approx. 50 °C and immerse the workpiece briefly. Electrolytic cleaning: Apply direct current (approx. 5 V) using a suitable electrode to enhance cleaning efficiency. Important: After cleaning, always rinse the workpiece thoroughly with clean water before proceeding with activation or electroplating. Safety Information Although the electrocleaner is designed for metal processing, it is a chemical product and must be handled with care: Wear chemical-resistant gloves, safety goggles and protective clothing Avoid contact with skin and eyes Use only in well-ventilated areas Do not inhale vapors or aerosols Do not ingest and keep out of reach of children In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice if necessary. Scope of Delivery Electrocleaner – Degreaser SW10002.5 Quantity according to selection Conclusion The Electrocleaner – Degreaser is an essential product for reliable surface preparation in electroplating. Clean, grease-free metal surfaces are the foundation for uniform, adherent and high-quality coatings. This product supports both beginners and professionals in achieving consistent and professional results.

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik.    This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes.  The coating of larger areas is also quite fast with this pad.   The insertion hole is larger than the electrode and therefore it happens that the moist  anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.    

Stainless Steel Electrode Ø 6 mm (BMG-007) Short Description The Stainless Steel Electrode Ø 6 mm is a versatile plating electrode designed for a wide range of electroplating tasks, especially degassing, activation, dechroming and chrome plating. Suitable for pen, bath and pad electroplating, it delivers consistent current flow and durable performance in your plating setups.  Product Description This electrode is made from corrosion-resistant stainless steel with a diameter of 6 mm and a length of approx. 9.5 cm, making it a compact and easy-to-handle tool for many galvanic applications. It is particularly effective for: Degreasing and activating metal surfaces prior to plating Dechroming or preparing surfaces for subsequent layers Chrome plating processes where robust anode performance is needed Pre-treatment and cleaning steps during electrochemical work  It fits standard holders and electrode grips used in pen and tampon plating and provides reliable performance in repeated or continuous use.  Key Benefits Durable stainless steel construction: Offers good chemical resistance and long service life.  Broad compatibility: Well-suited for degreasing, activation and dechroming operations.  Effective for chrome plating: Works particularly well in chromic electroplating applications. Standard size: Ø 6 mm fits most electrode handles and plating tools.  Easy to use: Ergonomic size and reliable conductivity promote smooth workflows.  Usage Tips Clean and degrease surfaces before using the electrode for best results. In plating processes such as gold or silver, consider using a graphite or platinum electrode instead, as stainless steel may contaminate some plating baths.  For chrome plating, stainless steel may be used effectively, sometimes in combination with aluminium electrodes.  Conclusion The Stainless Steel Electrode Ø 6 mm is a reliable, robust and versatile tool for a variety of electroplating and surface preparation tasks – especially degreasing, activation and chrome plating. Its solid construction and compatibility with standard plating systems make it a valuable addition to any workshop or lab.