Chrome Remover / Chrome Stripper – Electrolytic Dechroming with Precision This high-performance chrome remover / chrome stripper is specifically developed for electrolytic dechroming (reverse plating) using controlled electrical current. By applying the correct polarity, the chrome layer is selectively dissolved, revealing the underlying nickel layer without damaging the base material. Suitable for pen plating, tampon processes, and bath electroplating applications. How It Works – Reverse Polarity Dechroming Unlike electroplating, this process uses reversed polarity: Workpiece = Positive pole (Anode) Electrode (stainless steel) = Negative pole (Cathode) A stainless steel electrode is used due to its chemical resistance and stability during the process. This setup causes the chrome layer to undergo anodic dissolution. Visible indicator: The typical bluish chrome finish fades, and the yellowish nickel layer underneath becomes visible. Applications Pen plating (selective plating) Tampon / swab technique Electrolytic bath systems Selective or full-surface chrome removal Application Guide – From Beginner to Professional Beginner Clean and degrease the workpiece thoroughly Connect the workpiece to the positive pole (anode) Connect the stainless steel electrode to the negative pole (cathode) Apply the chrome remover using a pen or tampon Start with low current aprox. 5 Volt and increase gradually  Important: Correct polarity is critical – only with the workpiece on the positive pole will the chrome layer dissolve. Advanced Users Adjust current density depending on chrome thickness Maintain even movement for uniform removal Rinse intermittently to monitor progress Professionals Control parameters via current density (A/dm²), voltage, and time Perform selective dechroming on complex geometries Integrate into multi-step electrochemical processes Key Advantages ✔ Controlled anodic chrome removal ✔ Visual process control (chrome → nickel transition) ✔ Compatible with pen, tampon, and bath systems ✔ Stainless steel electrode for durability and stability ✔ High precision with minimal material impact Technical Background This process is based on established electrochemical principles: Anodic dissolution of chromium in suitable electrolytes Standard method in electroplating and metal stripping technology Nickel remains due to its different electrochemical potential Widely documented in: Electroplating engineering and surface technology literature Industrial chrome stripping (reverse plating) processes Metal finishing standards and technical manuals Typical Use Cases Automotive parts & restoration Jewelry and decorative finishes Industrial rework and repair Precision engineering & model making Conclusion This chrome remover for electrolytic dechroming provides a precise, controllable, and industry-proven solution for removing chrome layers efficiently. With correct polarity and a stainless steel electrode, you achieve clean, reliable results every time.

The Chrome Electrolyte BMG 106 is a high-performance solution designed for professional chrome plating of metal surfaces. It delivers uniform, high-gloss, and durable chrome layers with excellent adhesion and long-lasting performance. Thanks to its stable process characteristics, this electrolyte is suitable for both beginners and professional users, enabling consistent and reliable results in decorative as well as functional applications. Whether you are working on jewelry, automotive parts, or technical components, the BMG 106 chrome electrolyte ensures brilliant finishes and maximum durability.  Key Features & Benefits Mirror-like, high-gloss chrome finish Excellent adhesion on various metals Uniform coating distribution High resistance to wear and corrosion Easy to use with stable process control Suitable for beginners and professionals  Technical Parameters (Voltage values are guideline values) Current Density: 5–24 A/dm² (up to 50 A/dm² with movement) Bath Plating Voltage: approx. 2 / 3.2 / 5.6 V (at 5 / 10 / 20 cm distance) Brush Plating Voltage: approx. 3–7 V (recommended: 4–5 V) Working Temperature: 20–45 °C pH Value: 4–5 Immersion Time: 3–15 minutes Deposition Rate: approx. 0.06 µm/min at 10 A/dm² and 20 °C Anodes: Aluminum, platinized titanium, platinum, or iridium  Note: Parameters may vary depending on substrate material, geometry, and desired coating thickness.  Application (Step-by-Step Guide) For optimal chrome plating results: Cleaning & Degreasing Thoroughly remove oils, grease, and contaminants Activation Prepare the surface to ensure maximum adhesion Intermediate Layer (Recommended) Apply nickel or copper for improved brightness and durability Chrome Plating Process Connect the workpiece as cathode Maintain consistent current density Keep parameters stable during plating Rinsing & Finishing Rinse with clean water and dry properly  Applications Jewelry and decorative items Automotive parts (trim, rims, components) Tools and mechanical parts Sanitary and household products Industrial and precision components  Target Users Beginners in electroplating Hobby users Workshops and manufacturers Professional plating operations  Your Advantages Consistent and reproducible results High-quality, long-lasting chrome coatings Easy integration into existing processes Professional performance with user-friendly handling  Conclusion The Chrome Electrolyte BMG 106 is the ideal solution for achieving high-gloss, durable, and professional chrome coatings. Designed for both beginners and experts, it combines ease of use with outstanding performance.

Chrome Electroplating System S BMG‑25A‑100M – Professional Kit for Chrome & Metal Coatings Short Description: The BMG‑25A‑100M Chrome Electroplating System S is a complete electroplating kit designed to make chrome plating and other metal coatings easy and accessible. It is suitable for hobbyists, professionals, workshops, industry use, and educational settings. With this system, you can coat metal objects with chrome and many other metals quickly and reliably. real-gold.de What is Electroplating? Electroplating is a process that uses electric current and a chemical solution (electrolyte) to deposit metal ions onto a conductive surface. This creates a thin, even, and durable metal coating on the surface of your object. real-gold.de Applications This chrome electroplating kit is designed to coat a wide range of conductive materials, including tin, zinc, brass, copper, nickel, silver, and stainless steel. It also works on chrome‑plated surfaces or chrome‑plated plastic that has a conductive layer. The system can deposit chrome and many other metals including: Chrome & black chrome Nickel Alkaline or acidic copper Silver Gold and gold alloys Rhodium and black rhodium Palladium & platinum Zinc, tin & bronze real-gold.de Typical applications include coating small decorative parts, automotive trim, railings, tools, jewelry details, or any metallic surface where a chrome finish is desired. real-gold.de How It Works Prepare the surface: Clean, degrease, and remove old coatings if necessary. Fill the electrolyte: Pour the electrolyte solution into suitable containers. Connect and apply current: Use the electroplating device to pass current through the object and electrolyte. Finish: Rinse, dry, and inspect for a smooth, uniform chrome surface. No matter the size of the object, this system can be used mobile or stationary and handles large and small surfaces with consistent results. real-gold.de Complete Package / Accessories 1. Electroplating Device 1x Power supply / galvanic unit – 25 A with digital display, adjustable from approximately 2.5 V to 15 V, including power cord. real-gold.de 2. Cables & Handle 1x Positive cable (PLUS) 1x Negative cable (MINUS) with clamp 1x Handle with quick‑release fastening real-gold.de 3. Electrodes (Anodes) 4x Stainless steel electrodes (6 mm thick) – for dechroming, activating, degreasing, and chrome plating 1x Nickel electrode (6 mm) – for nickel plating 1x Graphite electrode – suitable for general coatings 1x Aluminum electrode (6 mm) – specifically for chrome plating real-gold.de 4. Pads / Tampons 6x Fabric pads for tampon electroplating real-gold.de 5. Beakers & Consumables 6x Large beakers with lids real-gold.de 6. Chemicals / Electrolytes 500 ml Electrocleaner – for degreasing surfaces 500 ml Chrome remover – removes unwanted chrome 500 ml Activator – activates stainless steel or nickel‑containing alloys 500 ml Alkaline copper electrolyte 500 ml Nickel electrolyte 500 ml Chrome electrolyte real-gold.de 7. Documentation & Support User manual in German and English (PDF) Training guides and video tutorials via email Free personal technical support 24‑month warranty and unlimited consultation from the support team real-gold.de Technical Highlights Adjustable high‑power electroplating power supply with stable voltage and current control Digital display for precise current and voltage monitoring Safety features including overload protection, short‑circuit protection, reverse polarity protection, and voltage cutoff Compact and portable system, ready to use for both mobile and fixed operations real-gold.de Benefits For Beginners: Complete kit that is ready to use right out of the box Comprehensive support and guidance included real-gold.de For Professionals & Workshops: Versatile setup for workshop or lab environments Expandable with additional electrolytes and accessories Capable of handling a broad range of chrome plating and metallic coating tasks real-gold.de Important Notes Only use on conductive surfaces; non‑conductive materials must be precoated with a conductive layer. real-gold.de Always observe appropriate safety precautions: wear gloves, eye protection, and ensure adequate ventilation. real-gold.de Coating results depend on surface preparation, electrolyte selection, and proper current settings.

Rust Remover from Betzmann Galvanik! Rust remover - Rust Ex from Betzmann GalvanikThe combination of effective chemicals and selected polishing agents results in a unique formula for reviving heavily corroded metal objects. Corrosion inhibitors prevent attack on non-corroded parts. Economical and easy to use. Ideal for treating large areas of iron, bronze, copper, steel, etc. Ingredients: AQUA, ALUMINA, HYDROCHLORIC ACID, fatty alcohol polyglycol ether, fatty acids, 2-propyn-1-ol, compound with methyloxirane, XANTHAN GUM, COCAMIDOPROPYL BETAINE , prop-2-in-1-ol. Information on ingredients according to the Detergents Directive - Annex VII D, EC -648/2004 is available on the EU portal "European List of Cosmetic Ingredients".        GHS05 GHS07  Danger. Causes severe skin burns and eye damage. May cause respiratory irritation. If medical advice is needed, have packaging or label at hand. Keep out of the reach of children. Wear protective gloves / protective clothing / eye protection / face protection. Do not breathe vapor. IF ON SKIN (or hair): Remove all contaminated, soaked clothing immediately. Wash skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove existing contact lenses if possible. Continue to rinse. Contains: Fatty alcohol polyglycol ether, hydrochloric acid.  

Aluminum Activator – The Critical Step for Perfect Plating on Aluminum The aluminum activator is a specialized chemical solution designed for the pre-treatment of aluminum surfaces prior to electroplating. Aluminum instantly forms a dense oxide layer when exposed to air. This layer acts as a barrier, preventing metals such as copper, nickel, or gold from bonding to the surface. Without proper pre-treatment, durable electroplating on aluminum is not possible. This activator removes the oxide layer and prepares the surface for strong adhesion and uniform metal deposition. Why Aluminum Requires Pre-Treatment Aluminum naturally develops an oxide film that: is electrically insulating blocks metal adhesion causes peeling and coating failure Professional electroplating requires a clean, oxide-free, and activated surface. This is exactly what the aluminum activator provides. How the Aluminum Activator Works Effectively removes oxide and passive layers Chemically activates the surface Improves wettability Enables uniform and stable metal deposition Result: strong adhesion and long-lasting coatings Key Benefits Essential for aluminum electroplating Simple, current-free application Significantly improved coating adhesion Uniform, defect-free plating results Compatible with all electroplating methods Compatible Coatings After activation, the surface is ready for: Copper Nickel Gold Silver Palladium Chrome Ideal as a base for multi-layer plating systems. Technical Specifications Application type: chemical pre-treatment (no current required) Function: oxide removal & surface activation Operating temperature: room temperature to slightly elevated Treatment time: depends on alloy and oxidation level Substrate: aluminum and aluminum alloys Post-treatment: rinse thoroughly with water Step-by-Step Instructions 1. Cleaning Remove grease, oil, and contaminants completely 2. Activation Immerse the workpiece in the aluminum activator 3. Reaction Oxide layer is chemically removed Surface becomes reactive and wettable 4. Rinsing Rinse thoroughly with clean water 5. Plating Immediately proceed with plating (e.g. copper or nickel) Important: Do not delay – aluminum re-oxidizes instantly Common Problems Without Pre-Treatment Poor adhesion Peeling or flaking coatings Uneven plating results Electrical contact issues Root cause in most cases: missing activation step Professional Tip In advanced applications, aluminum is often coated with an intermediate layer (e.g. zincate or copper strike) to further enhance adhesion and durability. Compatible Plating Methods Pen plating Brush / tampon plating Bath plating Typical Applications Jewelry and decorative finishes Automotive components Mechanical engineering Electronics Restoration and repair Safety Information Wear protective gloves and goggles Avoid skin contact Use in well-ventilated areas Store safely after use Conclusion – No Adhesion Without Proper Activation The aluminum activator is not optional—it is a critical step in aluminum electroplating. It ensures: strong adhesion uniform coatings professional, long-lasting results If you want to plate aluminum successfully, proper surface activation is mandatory. ideal for copper, nickel, and gold plating systems compatible with all electroplating setups suitable for beginners and professionals

Nickel Electrolyte BMG-091.1 High-Quality Nickel Electrolyte for Electroplating Metal Surfaces Short Description The Nickel Electrolyte BMG-091.1 is a ready-to-use galvanic solution for electroplating decorative nickel layers on metal parts. It is suitable for beginners, workshops, and professional applications. Nickel plating improves corrosion resistance, enhances surface finish, and prepares the surface for further coatings such as gold or chrome plating. real-gold.de What Is This Nickel Electrolyte Used For? This nickel electrolyte is designed for electroplating a smooth, bright nickel coating onto metal objects to: provide a protective layer against corrosion improve surface appearance and wear resistance act as an intermediate layer before gold, silver, or chrome plating real-gold.de Typical applications include: Automotive and machinery parts Decorative metal components Restoration and repair projects Hobby and craft electroplating How Does Nickel Plating Work? (Simple Explanation) Electroplating uses electric current to deposit metal from a liquid solution onto a workpiece. Clean and degrease the metal surface thoroughly. Attach the workpiece as the cathode (negative terminal). Immerse both the workpiece and a nickel anode in the nickel electrolyte. Apply direct current; nickel ions in the solution are reduced and form a solid nickel layer on the workpiece. real-gold.de Proper surface preparation and correct electrical settings are key to achieving a smooth, shiny nickel finish. Advantages of Nickel Electrolyte BMG-091.1 Easy to use for beginners and advanced users Produces uniform, bright nickel coatings Ideal as a protective layer or base for further plating processes Works with common plating methods such as tank plating, brush plating, and pen plating real-gold.de Technical Parameters PropertyValue / RangeNotesElectrolyte TypeNickel electrolyteFor decorative nickel platingWorking Temperature15–60 °CRoom temperature operation possibleVoltage (Tank Plating)~2–6.5 V~4 V recommendedVoltage (Pen / Brush Plating)~3–6 V~4.5 V recommendedCurrent Density0.5–4 A/dm²Up to ~7 A/dm² with bath movementpH Value~3.5–4.5Correctable with dilute acidDeposition Rate~1.3 µm/min at 3 A/dm²Typical plating performanceTypical SubstrateSteel, copper, brass, other metalsClean and prepare surfaceRecommended AnodesNickel or platinumBest results with appropriate anode selection Practical Application Notes Clean the workpiece meticulously before plating to ensure good adhesion. real-gold.de Nickel layers provide an excellent barrier layer for later gold, silver, or chrome plating. real-gold.de Slight movement of the electrolyte bath can help create a more uniform nickel layer. real-gold.de Nickel plating is widely used because nickel adheres well to many metals and provides a good base for further finishes. realgold-shop.de Safety Information Nickel electrolytes contain nickel compounds, which can cause allergic skin reactions and other health effects if mishandled: Wear protective gloves and eye protection Avoid skin and eye contact Work only in well-ventilated areas Do not inhale vapors or mists Keep out of reach of children Follow all instructions and the safety data sheet (SDS) real-gold.de Scope of Delivery Nickel Electrolyte BMG-091.1 Quantity according to selected size Important Notice This product is not a toy and requires basic electroplating knowledge. For best results, combine this electrolyte with proper pre-treatment and post-treatment products. Continuous monitoring of parameters such as voltage, current, and bath condition will improve plating quality