Kobalt Solution
€13.50
Available, delivery time: 1-2 days
Product information "Kobalt Solution"
Cobalt Electrolyte SW10035M
High-quality electroplating solution for cobalt deposition
Short Description
The Cobalt Electrolyte SW10035M is a ready-to-use electroplating solution for the electrolytic deposition of uniform, hard, and bright cobalt layers on conductive metal surfaces.
Cobalt coatings offer good chemical resistance, corrosion protection, attractive metallic appearance, and mechanical stability. This electrolyte is suitable for both decorative and functional coatings.
Applications
The cobalt electrolyte is used for:
-
Decorative surfaces with metallic shine
-
Protective layers against wear and corrosion
-
Functional coatings for technical components
-
Use in tank, brush, and pen/peg plating
-
As a base or intermediate layer for multi-layer plating processes
Cobalt coatings combine aesthetic appeal with good mechanical properties, making them ideal for jewelry, electronic components, machinery parts, and technical applications.
How Cobalt Electroplating Works (Simple Explanation)
Cobalt is deposited through electrolytic plating:
-
Surface Preparation: Clean and degrease the workpiece to remove oils and contaminants.
-
Activation: Chemically activate the surface if needed for optimal adhesion.
-
Plating: Apply direct current; cobalt ions from the solution are reduced and form a uniform, metallic cobalt layer on the surface.
-
Post-treatment: Rinse and dry the plated part.
The resulting cobalt layer is uniform, bright, and mechanically stable.
Benefits of Cobalt Electrolyte SW10035M
-
Uniform, bright metallic surface
-
Good chemical resistance and wear protection
-
Ideal for decorative and functional applications
-
Compatible with tank, brush, and pen/peg plating
-
Versatile on various substrates after proper pretreatment
-
Excellent foundation for further multi-layer plating
Technical Parameters
| Property | Value / Range |
|---|---|
| Electrolyte type | Cobalt electroplating solution |
| pH | Slightly acidic to neutral (optimized for plating) |
| Operating temperature | 20–35 °C |
| Voltage (tank plating) | 1.5–4.0 V |
| Voltage (brush/pen plating) | 3–7 V |
| Current density | 0.5–3 A/dm² |
| Anode material | Graphite or cobalt-alloy anodes |
| Typical layer thickness | 2–8 µm (depending on application) |
| Surface appearance | Bright metallic |
| Layer hardness | Medium to high |
| Conductivity | Good |
| Applications | Decorative, electronics, technical parts |
Note: Values are practical guidelines; actual results may vary depending on equipment, workpiece geometry, and process conditions.
Practical Application Tips
Surface Preparation:
-
Clean and degrease workpieces thoroughly.
-
Activate surfaces if needed to remove passive oxides.
Cobalt Plating:
-
Operate the electrolyte according to recommended parameters.
-
Ensure even movement in brush/pen plating for uniform layers.
-
Maintain proper distance between anode and workpiece for consistent deposition.
Post-treatment:
-
Rinse with clean water after plating.
-
Dry and, if desired, gently polish to enhance shine.
Safety Information
Cobalt electroplating solutions contain chemical components and must be handled carefully:
-
Wear gloves, safety glasses, and protective clothing
-
Avoid contact with skin and eyes
-
Rinse immediately with water if contact occurs
-
Work in well-ventilated areas
-
Do not ingest; keep out of reach of children
-
Dispose of waste according to local chemical regulations
Proper safety measures and protective equipment are essential for safe handling.
Conclusion
The Cobalt Electrolyte SW10035M is a reliable electroplating solution for producing bright, high-quality cobalt layers.
It combines aesthetic metallic appearance with good mechanical strength and chemical resistance, making it suitable for both decorative and functional applications. With broad applicability and easy handling, it is ideal for hobbyists, workshops, and professional plating facilities.
Similar Items
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.
Graphite Electrode Ø 6 mm (BMG‑010) Short Description The Graphite Electrode Ø 6 mm (BMG‑010) is a durable, chemically inert electrode rod made from high‑density fine‑grain graphite. Designed for use as an anode or electrode in electroplating processes, it is ideal for bath, pen, and pad plating applications where a clean, metal‑free current supply is essential. Product Description This graphite electrode is manufactured from highly compressed fine‑grain graphite, which dissolves only slowly in electrolytes. Unlike metallic anodes, graphite does not shed contaminating metal particles, ensuring cleaner coatings and higher deposit quality. The 6 mm diameter rod, with an approximate length of 95 mm, fits standard plating fixtures, holders, and pen plating tools, making it easy to integrate into various electroplating setups Typical Applications Electroplating processes (e.g., silver, gold, copper, black nickel, chrome, white bronze) Pen, bath, and pad plating Activation and pre‑treatment steps Counter‑electrode or anode use in a wide range of electrolytes Situations where metal contamination must be avoided Key Benefits Chemically inert: prevents unwanted metal ion contamination in the plating bath. Versatile: compatible with most electroplating chemistries and techniques. Slow wear: dissolves gradually, extending service life. Affordable: cost‑effective solution for frequent use. Easy to use: fits common plating holders and pen plating tools. Material & Dimensions Material: High‑density fine‑grain graphite Diameter: 6 mm Length: approx. 95 mm (other lengths may be available) Practical Tips Ensure electrodes are clean and free of oils before use. Replace electrodes periodically as they slowly dissolve during electroplating. Graphite’s mild warming effect can help stabilize bath temperature during plating. Conclusion The Graphite Electrode Ø 6 mm is an effective and reliable anode/electrode for a wide range of electroplating applications. Its inert behavior, broad compatibility, and metal‑free current delivery make it a solid choice for hobbyists, workshops, labs, and professional plating operations.