Silver Electrolyte BMG‑103.8 High-quality silver plating solution – 30 g of silver per liter Short Description The Silver Electrolyte BMG‑103.8 is a ready-to-use electroplating solution formulated for the electrolytic deposition of bright, high-quality silver layers. With 30 grams of silver per liter, it produces uniform, reflective, and conductive silver coatings suitable for both decorative and functional applications. The deposited silver layer provides excellent optical brightness, good wear resistance, and high electrical conductivity, ideal for jewelry, electronics, and precision components. Applications This silver plating solution is used for: Decorative silver plating for jewelry, accessories, and ornamental items Functional plating to improve electrical and thermal conductivity Wear-resistant surfaces and protective coatings Tank, brush, and pen/peg plating, depending on equipment Multi-layer plating systems (e.g., copper → silver → gold) Silver plating enhances both aesthetic appeal and surface performance, especially where brightness and conductivity are important. How Silver Plating Works (Simple Explanation) Silver plating uses electrolytic deposition, where silver ions in the electrolyte are reduced under direct current and form a metal layer on a prepared surface: Surface Preparation: Clean and degrease the workpiece thoroughly to remove oils and contaminants. Activation: Activate the surface if necessary to ensure good adhesion. Electroplating: Connect the part as the cathode (negative pole) and apply direct current; silver ions migrate and deposit as a smooth, bright layer. Finishing: After plating, rinse and dry – the silver layer remains bright and reflective. The resulting silver coating is uniform, glossy, and durable. Benefits of Silver Electrolyte BMG‑103.8 Bright, reflective silver finish Good electrical and thermal conductivity Suitable for decorative and functional applications Compatible with tank, brush, and pen/peg plating Produces uniform and durable deposits Ideal for jewelry, electronics, contacts, and connectors Technical Parameters PropertyValue / RangeElectrolyte typeSilver electroplating solutionSilver contentapprox. 30 g/LpHslightly acidic to neutral, optimized for silver depositionOperating temperature15–30 °CVoltage (tank plating)1.5–3.5 VVoltage (brush/pen plating)3–7 VCurrent density0.5–3 A/dm²Anode materialGraphite or pure silverTypical deposit thickness1–5 µm (adjustable by time/parameters)Surface appearanceBright and smoothDeposit purity>99.9 % silverConductivityVery goodShelf life1–2 years Note: Values are practical guidelines and may vary slightly depending on equipment, setup, and application conditions. Practical Application Tips Surface Preparation: Thoroughly clean and degrease workpieces to remove grease, oils, and fingerprints. Perform activation if necessary for uniform adhesion. Silver Plating: For tank plating, maintain consistent voltage, current density, and electrolyte circulation. For brush or pen plating, keep tools moving steadily for even coverage. Masking: Use masking tape or resist materials for areas not to be plated. Post-Plating: Rinse plated parts with clean water. Dry and, if desired, gently polish to enhance brightness. Safety Information Silver electrolytes are chemical solutions and must be handled carefully: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes; rinse immediately if contact occurs Work only in well-ventilated areas Do not ingest; keep out of reach of children Dispose of waste according to local chemical and environmental regulations Silver salts and electrolytes may cause irritation; proper protective measures are essential for safe use. Conclusion The Silver Electrolyte BMG‑103.8 is a reliable and versatile electroplating solution that delivers bright, uniform, and conductive silver layers for both decorative and functional purposes. Its ease of use across tank, brush, and pen/peg plating processes, combined with excellent optical and technical properties, makes it suitable for hobbyists, workshops, and professional plating environments. Proper surface preparation and process control ensure high-quality silver finishes every time.

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.

Gold Electrolyte 2 g/L (BMG-077-TG-2GM) Short Description The Gold Electrolyte 2 g/L (BMG-077-TG-2GM) is a high-quality electroplating solution containing approximately 2 grams of gold per liter. It produces bright, even and hard gold coatings and is suitable for bath, pen and pad plating applications across a wide range of metallic substrates.  Applications This gold electrolyte is used for: Decorative gold plating of jewelry, accessories, and metal objects Functional coatings for corrosion protection and conductivity Plating of electrical contact surfaces and precision parts Repair and refurbishment of previously plated components Electroplating processes in workshops, labs, and production environments  Benefits Uniform, hard gold layers with excellent abrasion resistance  Fast deposition rate under controlled conditions  Versatile for bath, pen and pad plating  Good coverage and bright finish Compatible with various substrates such as stainless steel, brass, copper, nickel and more  Technical Parameters (Guidelines) PropertyTypical Value / RangeGold concentrationapprox. 2 g/LOperating voltageapprox. 3.0–8.0 V DCTemperature14–25 °CGold deposit purity99.9 % AuDeposition rateapprox. 0.7 µm/min at 3.5 VHardness220–230 HVDensity19.0 g/cm³ElectrodePlatinum recommended, graphite possible  These values are practical guidelines and may vary depending on equipment and conditions.  How to Use (Practical Guide) Surface Prep: Polish surfaces before plating for improved final shine.  Cleaning & Activation: Thoroughly degrease and activate to ensure good adhesion.  Plating: Begin with a platinum electrode at about 5 V; adjust as needed. Post-Treatment: Rinse with clean water and dry.  Safety Information Wear protective gloves, goggles and suitable clothing Avoid contact with skin and eyes Rinse thoroughly if contact occurs Dispose of waste according to local regulations  Conclusion The Gold Electrolyte 2 g/L delivers bright, hard and uniform gold coatings suitable for a wide range of electroplating applications, making it an excellent choice for hobbyists, workshops, labs and professional environments alike

Gold Electrolyte BMG‑067M High-Quality Gold Plating Electrolyte – 8 g Gold per Liter Short Description The Gold Electrolyte BMG‑067M is a ready-to-use plating solution for electrolytic gold deposition on metal surfaces. Containing 8 grams of pure gold per liter, it produces bright, shiny, and corrosion-resistant gold layers on conductive metals. Suitable for hobbyists, workshops, and professional use, it can be applied in tank plating as well as brush or tampon plating. Applications The gold electrolyte is ideal for: Decorative gold plating (jewelry, accessories, design objects) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems (e.g., Copper → Nickel → Gold) For best results, surfaces should be polished, degreased, and activated before plating. How it Works (Simple Explanation) Polish: Prepare the surface to a high gloss. Clean: Degrease thoroughly (e.g., with an electrocleaner). Activate: Chemically treat the surface with an activator. Plating: Using direct current and a suitable anode (platinum or graphite), gold is deposited from the solution. The result is a thin, uniform gold layer with a high purity of 99.9%, which is bright, corrosion-resistant, and long-lasting. Advantages Easy to use for beginners and professionals Produces shiny, uniform gold layers High purity gold deposit (99.9%) Suitable for tank, brush, and tampon plating Versatile for decorative and technical applications Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solutionGold contentapprox. 8 g/LpHacidic, lowOperating temperature14–25 °CVoltage3–5 VRecommended anodePlatinum or graphiteGold content in deposit99.9 % (rest carbon)Deposition rateapprox. 0.5 µm/min at 3.5 VCathode efficiencyapprox. 35–40 %Maximum layer thicknessup to 10 µmLayer hardnessapprox. 220–230 HVDeposit densityapprox. 19.3 g/cm³Storageprotect from direct sunlightShelf lifeapprox. 1–2 years Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at 3–5 V with a platinum or graphite anode Partial plating: Masking possible (e.g., tape, nail polish) Sloped surfaces: Use of a leveling agent or thickener can reduce material loss Safety Instructions Gold electrolytes contain chemical components and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Hazard statements: H302 (harmful if swallowed), H313 (may be harmful in contact with skin), H317 (may cause allergic skin reaction). Scope of Delivery Gold Electrolyte BMG‑067M Quantity according to selection Conclusion The Gold Electrolyte BMG‑067M is a powerful and versatile solution for gold plating, delivering bright, uniform, and corrosion-resistant gold layers. It is suitable for decorative applications (jewelry, accessories) and technical applications (contact surfaces, circuit boards). With easy handling, high gold purity, and precise deposition, it is ideal for hobbyists, workshops, and professional plating operations. Combined with proper surface preparation and activation, it ensures top-quality, durable, and visually outstanding results.